- DL manuals
- Abode
- Food Processor
- G2SMFP3001
- User Manual
Abode G2SMFP3001 User Manual
Summary of G2SMFP3001
Page 1
Important: retain for future reference g2smfp3001 multi function food processor user guide asda g2smfp3001 food processor.Indd 1 22/06/2012 15:26.
Page 2: Warnings:
Warnings: • important safety instructions • please read all instructions carefully before use • retain for future reference • when using electrical appliances, basic safety precautions should always be observed, including the following: • read all instructions. • avoid contact with moving parts. • t...
Page 3
How to... Recognise the parts of your food processor 3 base bowl plunger drive shaft rotor mount liquidiser cutter plate liquidiser cap steel blade slicing cutter spatula grating cutter blade cover plastic blade lid visit us at: www.Productcareuk.Com asda g2smfp3001 food processor.Indd 3 22/06/2012 ...
Page 4
Important safety information safety interlock mechanism foryoursafetythisfoodprocessorhasbeenfittedwithasafetyinterlockmechanismand will not operate unless correctly assembled. Pleaseensurethebowlhasbeenpusheddownfirmlyontothebaseassemblyandthe plastic lever on the lid locates correctly into the slo...
Page 5
Important: wash all items apart from the base in hot soapy water before use. Placethebaseonafirmlevelworktopawayfrom sources of high temperatures or steam. Never place the food processor near or over a cooker or other heat producing appliances. Never place in a heated oven. Important: always ensure ...
Page 6
6 these diagrams show attaching the steel blades only. The same process can be used for the plastic blades. 1. Place the rotor mount on a solid level surface. Slot the blade over the top of the rotor mount. 2. Push the blade down until it locks onto the bottom of the rotor mount. Important: the bott...
Page 7
4. Slot the lid onto the top of the bowl as shown. 3. Slot the rotor mount over the centre post of the bowl. Important: you may need to rotate the rotor mount to get it to fully slot over the centre post. 5. Rotate the lid clockwise to lock it in place. Ensure the tab with a padlock symbol on the ba...
Page 8
8 7. Wash the food you wish to chop and cut into suitable sized pieces. Slot the food into the feeder tube in the top of the lid. Slot the plunger into the top of the feeder tube on the lid. 6. Put the food processors plug into a socket and switch the power on. 8. Choose the speed that you wish to p...
Page 9
9 10. Twist the lid anti-clockwise and lift off. Pull the rotor mount out of the bowl. 9. Oncethefoodhasbeenchoppedtothe consistency you require turn the power off and remove the plug. Important: always remove the plug before removing the lid from the bowl. 11. Rinse any excess food off the blade an...
Page 10
Your food processor comes with two types of cutters. Slicing cutter thisisusedtofinelyslicefood. Maximum quantity 300g. Grating cutter this is used to grate food. Maximum quantity 300g. These diagrams show attaching the grating cutter only. Follow the same process for attaching the slicingcutter.Car...
Page 11
Important: always ensure the food processor is not plugged in before assembling or disassembling it. 3. Slot the cutter disk onto the top of the drive shaft. 4. Slot the lid onto the top of the bowl as shown. 5. Rotate the lid clockwise to lock it in place. Ensure the tab with a padlock symbol on th...
Page 12
6. Slot the food processors plug into a socket and switch the power on. 7. Wash, if needed, the food you wish to slice or grate and cut into suitably sized pieces. Slotthefoodtofitthroughthefeedertubeinthetop of the lid. 8. Slot the plunger into the top of the feeder tube on the lid. Push the plunge...
Page 13
9. Choose the speed that you wish to process your food at. P - pulse: this will switch to 0 (off) when released. 1 - low speed: coarsely chopped. 2 - high speed: finely chopped. 0 - off: cutters stop spinning. Now gently push down on the plunger until the food has been sliced or grated. 10. Oncethef...
Page 14
14 12. Pull the tab on the front of the cutter over the lug on the front of the cutter disk. 12. Grip the sides of the cutter and lift out of the recess in the cutter disk. 13. Carefully wash the cutter, cutter plate and bowl. For customer service & spare parts call: 08452097461, mon - fri 9am to 5p...
Page 15
15 important: always ensure the food processor is not plugged in before assembling or disassembling it. 1. Removethedriveshaftifitisfittedasitisnot needed for the liquidiser. How to... Use the liquidiser 3. Slot the liquidiser onto the base as shown. Turn the liquidiser clockwise until the arrow on ...
Page 16
4. Choose the speed that you wish to liquidise your food at. P - pulse: this will switch to 0 (off) when released. 1 - low speed: coarsely liquidised. 2 - high speed: finely liquidised. 0 - off: liquidiser blades stop spinning. 5. After liquidising your food, turn the food processor off and remove t...
Page 17
• before cleaning your food processor always ensure the plug is removed from the power socket. • the food processor and liquidiser should never be run with nothing in them, as this may damage the motor. • boiling water or extremely hot water should not be added to the liquidiser. • do not immerse th...
Page 18
18 for customer service & spare parts call: 08452097461, mon - fri 9am to 5pm , sat 9am to 1pm spare parts... If any parts of your food processor are missing, damage or need replacing please contact us: customer service & spare parts helpline on: 08452097461. Openingtimes:monday-friday9amto5pm&satur...
Page 19
19 visit us at: www.Productcareuk.Com electrical information... This appliance is designed to operate from a mains supply of ac230v ~ 50hz. Check the voltage marked on the product corresponds with your supply voltage. Thisproductisfittedwitha13aplugcomplyingwithbs1363andisfittedwiththe appropriate f...
Page 20: 08452097461
For customer services & spare parts please call 08452097461 openingtimes:monday-friday9am-5pm& saturday 9am - 1pm orvisitusat www.Productcareuk.Com revision 1 this symbol is known as the ‘crossed-out wheelie bin symbol’. When this symbol is marked on a product/batteries, it means that the product/ba...