Abode GPB101B User Manual - Using Your Blender
8
Using Your Blender
1. Place the blender base on a flat surface. Make sure the power outlet
is unplugged.
2. Place the jar on a flat surface with the opening end facing up. Fill the
jar with your favourite ingredients. Be sure not to exceed the 600ml
marking. You can find recipes online should you wish.
Note: The appliance can blend ice cubes. For optimal performance,
place your ingredients in the bottle in the following order: liquids,
fresh ingredients, frozen fruit, yogurt and ice cream.
3. You must peel and core fruit and vegetables, then cut it into small
dices around 15×15×15mm.
Note: Never use boiling liquids or run the appliance empty.
4. Attach the blade assembly on the opening end of the bottle by
turning it clockwise and securing.
5. Once the blade assembly is attached to the bottle, turn the bottle
upside down and insert the blade assembly into the blender base.
Make sure the arrow on the blender base is aligned with the blade
assembly, then turn the bottle clockwise to secure.
6. Plug the unit in to a wall outlet and the blender will begin to
operate.
Note: Do not run the appliance for more than 3 minutes per time.
7. When you have finished blending, turn the bottle anticlockwise and
the blender will stop operating. Lift to remove.
8. Turn the bottle so that the opening end is facing upwards. Carefully
unscrew the blade assembly, turning it anticlockwise and remove.
9. Screw the bottle lid on to the opening end, turning clockwise to
secure. Lift the flap on the bottle lid and drink from the drinking spout.