Summary of ABSFBM-120T
Page 1
Owner’s manual absfbm-120t spiral mixer.
Page 2
Contents 1 introduction ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(2) installation & commissioning•••••••••••••••••••••••••••••••••••••••••••••••••••(3) operation •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(4) caution ••••••••••••••••...
Page 3
Introduction 2 introduction the absfbm-120t is a spiral mixer with a three-timer control panel and two motors; one motor drives the hook while the other drives the bowl. The hook and bowl are made of stainless steel for long life and ease of cleaning. The full bowl cover keeps flour dust down and pr...
Page 4
Installation and commissioning 3 installation the machine is ready for installation. After uncrating your spiral mixer, inspect the machine for any damage that might have occurred during shipment. Report any damage to us before proceeding. Never attempt to operate this mixer with damaged parts. 1). ...
Page 5
Operation 4 control panel 1. Timers on top of the operation panel, there are three timers: timer , is for slow speed; timer Ⅲ is for fast speed. Each timer has three digits. The unit of a and b is minute while c is 10 seconds, for example: 0.1 is 10 seconds, 1.2 is 1 minute and 20 seconds. The timer...
Page 6
Operation 5 2. Indication lights indication lights indicate the running state of the spiral mixer: a). Auto/manual lights: when “auto” lamp lights up, spiral mixer is in auto operation. When “manu” lamp lights up, spiral mixer is in manual operation. B). Bowl direction lights: when lamp lights up, t...
Page 7
Operation 6 operation preparation check the machine’s bowl is clear of all foreign objects, all switches are off and work area should be clear of bystanders. Safety guard should be raised and pushed back fully against stop to avoid it falling onto operator. The mixer has safety interlocks to prevent...
Page 8
Operation 7 2. Manual operation a). Press button until the “manu” lamp lights up. B). Press buttons to select the desired bowl direction. C). Press to start. D). Press button when you want to stop the machine. The timer will not function under manual operation. The mixer will always start with slow ...
Page 9
Caution 8 1. Use the machine with great care and never be distracted. 2. Do not wear loose fitting clothes or clothing with wide or open sleeves. 3. Do not remove, cover or alter the warning stickers or machine safety covers placed on the machine body. 4. Use machine only for what it was intended. 5...
Page 10
Cleaning and maintenance 9 1. Brush off all external surfaces. Use a soft brush and work from the top to the bottom. 2. Remove all old dough using a plastic scraper. 3. Scrape the mixing bowl, the breaker bar, the dough spiral, under the bowl cover inside the mixing bowl, and behind the mixing bowl....
Page 11
Trouble shooting 10 fault possible cause remedy the mixer does not operate /start. Not plugged in. The main switch is “off”. The bowl safety cover is open. The mixer overload has been tripped. Stop button is still locked in the down position. Plug in and switch on. Turn the switch on. Place it down ...
Page 12
Trouble shooting 11 fault possible cause remedy the mixer does not stop electrical / mechanical malfunction. Switch off power at main switch. Isolate mixer by unplugging. Attach danger tag to machine. Contact authorized service agent. Bread dough too soft. Excessive water used in dough (human error)...
Page 13
Parts list 12.
Page 14
Parts list 13.
Page 15
Parts list 14.
Page 16
Parts list 15.
Page 17
Parts list 16.
Page 18
Parts list 17 parts number parts code parts name specification sm120t001 16jcqcn18-1 contactor sm120t002 16jcqcn16-1 contactor sm120t003 16lslci-18 mechanical connector sm120t004 16bxszd fuse seat sm120t005 16jdqmy4-24v relay ac 24v sm120t006 16jdqmy2-110v relay ac 110v sm120t007 16bxsg111b fuse cov...
Page 19
Parts list 18 16kglbe101 manual switch sm120t037 16kglza-bd3 manual switch seat sm120t038 13m444-12t-01 machine top cover sm120t039 11m750-12tt safety grids sm120t040 11m620-12t bowl sm120t041 15bslhy01 outrigger screw sm120t042 14d9016150-01 foot pad sm120t043 13m802-12t safety cover sm120t044 16md...
Page 20
Parts list 19 sm120t071 14m710-01 adjusting wheel for microswitch sm120t072 16kglmea9112g microswitch sm120t073 13m801-12t safety cover sm120t074 13m770-03 safety cover sm120t075 14m250-12t-03 pulley sm120t076 14m190-12t-03 top transmission shaft sm120t077 14m240-12t-02 bush sm120t078 15zcl3209vv be...
Page 21
Wiring diagram 20