1. DL manuals
  2. ABS
  3. Mixer
  4. ABSFBM-200T
  5. Owner's Manual

ABS ABSFBM-200T Owner's Manual

Summary of ABSFBM-200T

  • Page 1

    Owner’s manual absfbm-200t american baking systems, inc 290 legion court s.W. Cedar rapids, ia 52404 phone: 319-373-5006 fax: 319-373-5008.

  • Page 3

    Contents 1 introduction••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(2) installation & commissioning•••••••••••••••••••••••••••••••••••••••••••••••••••(3) operation•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(4) caution•••••••••••••••••••...

  • Page 4

    Introduction 2 introduction the absfbm-200t is a spiral mixer with a three-timer control panel and two motors; one motor drives the hook while the other drives the bowl. The hook and bowl are made of stainless steel for long life and ease of cleaning. The full bowl cover keeps flour dust down and pr...

  • Page 5

    Installation and commissioning 3 installation the machine is ready for installation. After uncrating your spiral mixer, inspect the machine for any damage that might have occurred during shipment. Report any damage to us before proceeding. Never attempt to operate this mixer with damaged parts. 1). ...

  • Page 6

    Operation 4 control panel 1. Timers on top of the operation panel, there are three timers: timerⅠ,Ⅱ is for slow speed; timer Ⅲ is for fast speed. Each timer has three digits. The unit of a and b is minute while c is 10 seconds, for example: 0.1 is 10 seconds, 1.2 is 1 minute and 20 seconds. The time...

  • Page 7

    Operation 5 2. Indication lights indication lights indicate the running state of the spiral mixer: a). Auto/manual lights: when “auto” lamp lights up, spiral mixer is in auto operation. When “manu” lamp lights up, spiral mixer is in manual operation. B). Bowl direction lights: when lamp lights up, t...

  • Page 8

    Operation 6 initial start-up (daily) check the machine’s bowl is clear of all foreign objects, all switches are off and work area should be clear of bystanders. Safety guard should be raised and pushed back fully against stop to avoid it falling onto operator. The mixer has safety interlocks to prev...

  • Page 9

    Operation 7 2. Manual operation a). Press button until the “manu” lamp lights up. B). Press buttons to select the desired direction. C). Press to start. D). Press button when you want to stop the machine. The timer will stop function under manual operation. The mixer will always start with slow spee...

  • Page 10

    Caution 8 1. Use the machine with great care and never be distracted. 2. Do not wear loose fitting clothes or clothing with wide or open sleeves. 3. Do not remove, cover or alter the warning stickers or machine safety covers placed on the machine body. 4. Use machine only for what it was intended. 5...

  • Page 11

    Cleaning and maintenance 9 1. Brush off all external surfaces. Use a soft brush and work from the top to the bottom. 2. Remove all old dough using a plastic scraper. 3. Scrape the mixing bowl, the breaker bar, the dough spiral, under the bowl cover inside the mixing bowl, and behind the mixing bowl....

  • Page 12

    Trouble shooting 10 fault possible cause remedy the mixer does not operate /start. Not plugged in. The main switch is “off”. The bowl safety cover is open. The mixer overload has been tripped. Stop button is still locked in the down position. Plug in and switch on. Turn the switch on. Place it down ...

  • Page 13

    Trouble shooting 11 fault possible cause remedy the mixer does not stop electrical / mechanical malfunction. Switch off power at main switch. Isolate mixer by unplugging machine. Attach warning tag to machine, contact service agent. Bread dough too soft. Excessive water used in dough (human error). ...

  • Page 14

    Parts list 12.

  • Page 15

    Parts list 13.

  • Page 16

    Parts list 14.

  • Page 17

    Parts list 15.

  • Page 18

    Parts list 16.

  • Page 19

    Parts list 17 parts number parts code parts name specification sm200t001 16jcqcn25-1 contactor cu-27 24v 3a1a1b sm200t002 16jcqcn16-1 contactor cu-16 3a1b 24v/50hz (4pcs) sm200t003 16jdqmy2-110v relay sm200t004 16jdqmy4-24v relay sm200t005 16bxsg111b fuse cover sm200t006 16jdqrhn10a-5 thermal relay ...

  • Page 20

    Parts list 18 sm200t031 14m630-07s stainless steel hook sm200t032 13m650-08 central pillar sm200t033 15zcl6015vv bearing 6015vv sm200t034 16mdl200as-1 top motor b5yd160m-4/8 y160m 12hp 4/8p 380v-50hz-3ph 12kw sm200t035 16mdl200tx-1 bottom motor b5y132s-12 1.5kw-12p-380-50hz sm200t036 15lzl5 rear whe...

  • Page 21

    Parts list 19 sm200t061 14m700-01 adjust wheel for bowl cover sm200t062 13rb215-01 bowl safety cover sm200t063 14m680-20 mount clip right sm200t064 14m710-01 adjust wheel for microswitch sm200t065 11m150-20 front castor seat sm200t066 15lzls4-3312 front castor sm200t067 14m190-20-01 top transmission...

  • Page 22

    Wiring diagram 20