Summary of ABSFBM-50
Page 1
Owner’s manual absfbm-50 (spiral mixer).
Page 2
Contents 1 introduction••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(2) installation & commissioning•••••••••••••••••••••••••••••••••••••••••••••••••••(3) operation•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(4) caution•••••••••••••••••••...
Page 3
Introduction 2 introduction the absfbm-50 is a spiral mixer with a two-timer control panel and a single motor that drives both the hook and the bowl. The hook and bowl are made of stainless steel for long life and ease of cleaning. The full bowl cover keeps flour dust down and protects the operator ...
Page 4
Installation and commissioning 3 installation the machine is ready for installation. After uncrating your spiral mixer, inspect the machine for any damage that might have occurred during shipment. Report any damage to us before proceeding. Never attempt to operate this mixer with damaged parts. 1). ...
Page 5
Operation 4 control panel 1. Timers on top of the control panel, there are two timers: timer i is for slow speed; timer ii is for fast speed. Each timer has three digits. The unit of a and b are minutes and c is 10 seconds, (for example: 0.1 is 10 seconds, 0.2 is 20 seconds.) the timers are set by a...
Page 6
Operation 5 2. Indication lights indication lights indicate the running state of the spiral mixer: a). Auto/manual lights: when “auto” lamp lights up, spiral mixer is in auto operation. When “manu” lamp lights up, spiral mixer is in manual operation. B). Bowl direction lights: as this mixer only has...
Page 7
Operation 6 3. Function keys auto / manual selection speed selection button bowl direction selection inching button start button stop button operation preparation check the mixing bowl is clear of all foreign objects, all control switches are off and operation area should be clear of bystanders. The...
Page 8
Operation 7 2. Manual operation a). Press button until the “manu” lamp lights up. B). Press buttons to select the desired direction. C). Press button to start. D). Press button when you want to stop the operation. The timer will stop functioning under manual operation. The mixer will always start wi...
Page 9
Caution 8 1. Use the machine with great care and never be distracted. 2. Do not wear loose fitting clothes or clothing with wide or open sleeves. 3. Do not remove, cover or alter the warning stickers or machine safety covers placed on the machine body. 4. Use machine only for what it was intended. 5...
Page 10
Cleaning and maintenance 9 1. Brush off all external surfaces. Use a soft brush and work from the top to the bottom. 2. Remove all old dough using a plastic scraper. 3. Scrape the mixing bowl, the breaker bar, the dough spiral, under the bowl cover inside the mixing bowl, and behind the mixing bowl....
Page 11
Trouble shooting 10 fault possible cause remedy the mixer does not operate /start. Not plugged into the socket at main switch. The main switch is “off”. The bowl safety guard is open. The mixer overload has been activated. Stop button is still locked in the down position. Plug in and switch on. Turn...
Page 12
Trouble shooting 11 fault possible cause remedy the mixer does not stop electrical / mechanical malfunction. Switch off power at main switch. Isolate mixer by removing wall plug. Attach danger tag to machine. Contact service agent. Bread dough too soft. Excessive water used in dough (human error). I...
Page 13
Parts list 20
Page 14
Parts list 21.
Page 15
Parts list 22.
Page 16
Parts list 23.
Page 17
Parts list 24.
Page 18
Parts list 25 parts number parts code parts name specification 16byqjbk63-1 transformer 220v/380v-26v/110v(2a) 16byqjbk63-18 transformer 400v-110v/26v 16byqjbk63-16 transformer o-208v-220v//110v(13va)-26v(50va) sm50001 16byqjbk63-2 transformer 415v-80%220v/20%26v sm50002 16lslci-18 mechanical connec...
Page 19
Parts list 26 sm50032 11m620-01 mixing bowl sm50033 13m801-06 bowl cover sm50034 13m802-06 bowl cover sm50035 13m640-01 clamping block sm50036 13m650-10 center pillar 14m630-01 dough hook sm50037 14m630-01s dough hook stainless steel sm50038 15zcl6207vv bearing 62072rs nachi sm50039 15zcl6010vv bear...
Page 20
Parts list 27 sm50064 14m600-01 lock nut sm50065 14m560-01 rotating plate sm50066 14m530-01 bearing housing sm50067 14m160-03 seat for front castor sm50068 14m150-03 bracket for front castor sm50069 14m170-02 shaft for front castor sm50070 14m670-03 adjusting wheel mount clip left sm50071 14m680-03 ...
Page 21
Parts list 28.