Abs applied biometric systems gmbh rev. 0.100 ethernet fingerprint image scanner efis321 user’s manual.
User’s manual efis321 page 2 table of contents table of contents ........................................................................................................................... 2 1. Product specifications ......................................................................................
User’s manual efis321 page 3 1. Product specifications the efis321 is ethernet fingerprint image scanner based on capacitive solid-state mbf200 sensor from fujitsu. It is designed for easy integration into security and/or service systems. Efis321 supports - 10/100 mbps ethernet interface - 2 access ...
User’s manual efis321 page 4 2. Hardware installation 2.1 connectors description the efis321 scanner has ethernet cable cat.5e. The cable is used for ethernet connection and for power supply of device. It uses the special adapter in order to support the power supply over ethernet cable. The connecto...
User’s manual efis321 page 5 the range of supply voltage: vdc 8-27v typical supply dc voltage is 12v. 2.2 default ip address switch the efis321scanner has a capability to change the ip address. The winconefis321.Exe utility lets to modify the specific parameters. If the ip address of efis321 is forg...
User’s manual efis321 page 6 in order to set default ip address, press the button via hole and keep of it for 2-3 seconds. The efis321 scanner must be connected to power line in this time. The ip address of device is on the label. The label is placed on the box cover. To read the configuration of et...
User’s manual efis321 page 7 input the default address and press button “read”. When you get the device configuration, you can press button “reboot”. The device will be rebooted and takes the network configuration from flash memory of device. Note: you must be sure, that the other network devices ha...
User’s manual efis321 page 8 3. Functionality the efis321 scanner provides to get the fingerprint images using ethernet interface. Efisc scanner control sdk lets have to simple interface to device. The scanner supports two modes of work - active mode (scanner works as tcp client) - passive mode (sca...
User’s manual efis321 page 9 4. Contact abs applied biometric systems gmbh im bauernbusch 27 12355 berlin germany info@biometricsys.De fax: +49 30 6789 2987.
