Summary of CORE
Page 1
Page 1 abtronic™ core fitness belt user manual user manual.
Page 2: Page 2
Page 2 abtronic™ core fitness belt user manual congratulations on your choice of the abtronic™core fitness belt. Please read this manual before first use. Controls a self-timer switches the unit off after 10 minutes. Program button to change 6 programs on/+ button, increase intensity off/- button, d...
Page 3: Page 3
Page 3 abtronic™ core fitness belt user manual 1. On/+: turns the unit on and increases the output intensity. Press once to increase the output intensity. The higher the intensity - the larger the contraction. To adjust to maximum output power you need to push this button 10 times. 2. Off/-: each pr...
Page 4: Page 4
Page 4 abtronic™ core fitness belt user manual operation battery 1. Open the battery door by pushing it in the direction of the arrow: 2. Insert one piece cr 2032 lithium battery into the battery compartment. The positive “+” pole of the battery should be facing you..
Page 5: Page 5
Page 5 abtronic™ core fitness belt user manual basic use 1. Attach the abtronic™core control unit onto the x silicon pad holder. Insert the controller by aligning the marking on the controller case with the holder: insert the control unit aligning it with the shorter marking on the holder at positio...
Page 6: Page 6
Page 6 abtronic™ core fitness belt user manual do not use damaged, worn or dirty gel pads as this might result in burns. Always, stick gel pads to all electrodes while using the product. Don’t apply the product directly to skin, this may be painful or cause irritation or burns. Precautions applying ...
Page 7: Page 7
Page 7 abtronic™ core fitness belt user manual 3. After affixing all gel pads properly, peel off the remaining film. Do not peel off the gel pad affixed to the electrode, until you need to replace them with new ones! 4. Gel pad storage after use, stick the abtronic™core pad with the gel pads attache...
Page 8: Page 8
Page 8 abtronic™ core fitness belt user manual removing gel pads 1. Only remove the gel pads if you need to replace them with new ones. 2. Turn off the product before removing the gel pad. Otherwise this may cause pain or irritation. 3. Peel off the complete gel pad slowly in one piece. • remove any...
Page 9: Page 9
Page 9 abtronic™ core fitness belt user manual control unit: 1. Press the on/+ button to power up the abtronic™core control unit. 2. Select the mode by pressing the “mode” button repeatedly. Every time you press the “mode” button a different led or combination will light up indicating one of the 6 p...
Page 10: Page 10
Page 10 abtronic™ core fitness belt user manual 4. The intensity has 10 steps. With every push of the button on/+ you increase the intensity by one step, with every push of the button off/- you decrease the intensity by one step. To switch the unit off, press the off/- button several times, until th...
Page 11: Page 11
Page 11 abtronic™ core fitness belt user manual auto functions when the conductive area of the belt (silver colored area) does not touch the skin, the intensity can only be set up to “1”. If the belt is removed during use, the intensity is automatically reset to “1”. If the belt is not placed back i...
Page 12: Page 12
Page 12 abtronic™ core fitness belt user manual important notes if there is no gel pad on the abtronic™core, or if it is not placed tightly against the skin, an uncomfortable tingling sensation can occur. This can also happen if the body has built up excessive oils on the skin. Before each use pleas...
Page 13: Page 13
Page 13 abtronic™ core fitness belt user manual taking care of your unit the abtronic™core is made of quality materials. The only maintenance required with the abtronic™core is to clean the conductive area gently, while you are replacing the gel pads, with a wet cloth and soapy water, further the ba...
Page 14: Page 14
Page 14 abtronic™ core fitness belt user manual important – please read if the gel pads are worn out, or dirty, an uncomfortable tingling sensation can occur. This can also happen if the body has built up excessive oil on the skin. Do not bend the conductive areas. Worn or dirty conductive gel pads ...
Page 15: Page 15
Page 15 abtronic™ core fitness belt user manual a. As long as the gel pads are not worn or dirty and are kept firmly against the skin you will not feel any unpleasantness. At low intensity you will feel a slight tingling sensation but as the intensity gets higher you will only feel the pleasant cont...
Page 16: Page 16
Page 16 abtronic™ core fitness belt user manual contraindications abtronic™core should not be used by people, with cardiac pacemaker, defibrillator or other implanted electronic or metallic devices. Abtronic™core should not be used by pregnant women, and during first 6 weeks after their baby’s birth...
Page 17: Page 17
Page 17 abtronic™ core fitness belt user manual transcerebrally (through the head) over swollen, infected or inflamed areas of skin eruptions (e.G., phlebitis, thrombophlebitis, varicose veins, etc.) transthoracically; introduction of electrical current into the heart may cause rhythm disturbances, ...
Page 18: Page 18
Page 18 abtronic™ core fitness belt user manual precautions / do not use when: 1. Do not use if there is tendency to hemorrhage (acute trauma or fracture). 2. Do not use following any recent surgical procedure when muscle contraction may disrupt the healing process. 3. Do not use over the menstruati...
Page 19: Page 19
Page 19 abtronic™ core fitness belt user manual trouble shooting guide problem possible cause solution leds do not light up at all batteries are not installed batteries are installed incorrectly. Batteries are empty install batteries check polarity “+” sign replace batteries leds light up, but nothi...
Page 20: Page 20
Page 20 abtronic™ core fitness belt user manual leds light up, but nothing occurs intensity set to low level worn or dirty gel pads. Abtronic™ is positioned incorrectly gel pads are worn or have oil deposits. Battery is low increase intensity by pushing the up button make sure the gel pads are still...
Page 21: Page 21
Page 21 abtronic™ core fitness belt user manual specification channel: single channel program modes 6 program modes intensity control: adjustable 0-28ua, max output 28ua peak to peak into 10k ohm load each channel. Wave form asymmetrical bi-phase square pulse out voltage adjustable 0-168v, max outpu...
Page 22
This product is brought to you by: abtronic by red lemon incorporation www.Abtronic.Co © by red lemon incorporation mmxv rlcoreengv1.1.