Abtus A934-212C-044 Manual - User Operation Guide
ITEM
DESCRIPTION
1 Buttons :
Physical Button location number and Function entry
(Button number 1 to 12)
2 Links :
Virtual Button location number and function entry
(Button number 13 to 32)
3 Button Parameter
*Each buttons are allow to have a independence parameter setting
Setup :
Baud Rate : 9600 to 38400
Parity : None, Odd or Even
Data bit : 8 bits or 7 bits
Stop Bit : 1 bit or 2 bits
4 TX Bytes :
Total length for the Data entered (*Max. 35 bytes = 2D in Hex per function)
5 Data :
Function/Command code entry (*Hex code ONLY)
6 RX/UP :
RX/UP check for Push and Pop command link
Push TX data link in Physical or Virtual button.
Pop TX data link in RX/UP (*Only one command is allow)
RX/UP uncheck for Return Command link (**Max two return command is allowed)
7 RX/UP Bytes :
Total length for the Data entered (*Max. 15 bytes = 0F in Hex per function)
8 RX/UP Data :
Function/Command code entry (*Hex code ONLY)
9 Macro :
Macro setting
10 Macro Delay :
Delay time for macro function (* 0 to 255)
With interval of 10 (*10=1sec, 20=1.5sec, 30=2sec and max 255 = 128sec)
11 Macro Link :
Macro link Physical or Virtual button number
12 Save :
Save each button function and command setup
13 Cancel :
Cancel any button function and command setup changed
14 RX/UP Link :
RX/UP link Physical or Virtual button number
15 Location Indication : Indicate the physical location on the touch panel
16 Communication
Parameter setup (default)
Setting :
Baud Rate : 9600
Parity : None
Data bit : 8 bits
Stop Bit : 1 bit
17 Version :
Software Version
18 Load :
Upload the configuration and setup to the Touch Panel
19 Setting :
Com port setting
20 File :
New file, Open file and Save file
User Operation Guide
* Specifications are subject to changes without notice.
12
05
Example
Virtual Links Button Macro setting
Button 13 to 32 are virtual links button on top of the 12 physical Button 1 to 12 allows a total 32 buttons to
be configure with this touch control panel.