Abtus MAX-HDMI88P User's Operation Manual - page 4
4
*Specifi cations are subject to changes without notice.
SYSTEM CONNECTION
SYSTEM OPERATIONS
System Applications
The 8×8 HDMI Matrix Switcher can be used in any installation that requires projecting
multi source onto multiple display, monitoring, large screen displaying, conference system,
television, education and bank securities institutions etc.
IR Control
Connect an IR receiver to the IR IN port of the switcher, users can
control it through the included IR remote. Here is a brief introduction
to the IR remote:
1. Standby: Enter/ exit stand by mode
2. INPUTS: Buttons for input selection
3. OUTPUTS: Buttons for output selection
I/O Switch Foramt: INPUT + OUTPUT
RS232 Communication Commands
1) Case-sensitve
2) “[“,”]” in the commands are for easy recognition only and not necessary in real operations. Other symbols
including “.”, “,”, “/”, “%”, “;”, “^”. are parts of the commands.
3) Feedbacks listed in the column “Feedback Example” are only for reference, feedbacks may vary
accoding to the different operations.
4) Dial the EDID switcher to “1111” before sending commands pertaining to software EDID management
(with grey background)