Abus TVAC15100 User Manual

Manual is about: 2.4 GHz digital transmission set

Summary of TVAC15100

  • Page 1

    Tvac15100 user manual version 06/2011 original english user manual. Keep for future use..

  • Page 2

    12 english introduction dear customer, thank you for purchasing this product. This product meets the requirements of the applicable european and national guidelines. The corresponding declarations and documents can be obtained from the manufacturer (www.Abus-sc.Com). To maintain this condition and t...

  • Page 3

    13 english icon explanation a flash in the triangle is used if there is danger for the health, e.G. By an electric shock. An exclamation mark in the triangle points to an important note in this user manual which must be minded. This symbol can be found when you are to be given tips and information o...

  • Page 4

    14 english warnings follow all safety and operating advises before starting-up the device! 1. Follow these directions in order to avoid damage of the power cord or plug: x do not modify or process the power cord or plug arbitrarily. X make sure to disconnect the power cord holding the plug. X keep h...

  • Page 5

    15 english table of contents 1. Intended use ......................................................................................................................................... 16 2. Scope of delivery ................................................................................................

  • Page 6

    16 english 1. Intended use using this 2.4 ghz digital transmission set, you can transmit video and audio signals wireless over medium to long distances without any problems. The video transmission set consists of a wireless transmitter and a wireless receiver. Wireless signal transmission is an adva...

  • Page 7

    17 english 4. Description of the connections 4.1 rear of the transmitter 4.2 rear of the receiver c power supply 5 v dc/1 a (dc, 14.5 x 4.8 mm) d av input input for the transmitted signal, use the av cable supplied e pairing button button for pairing the transmitter and receiver f power switch switc...

  • Page 8

    18 english 4.3 cable connections to connect the video rca plug to a bnc input or output on a camera, monitor or recorder, attach the bnc-rca adapter to the yellow rca plug. 4.4 video/audio signals on the jack plug c yellow rca connector (video) connection for transmitting the video signal n red rca ...

  • Page 9

    19 english 4.5 leds description led on led flashing led off power led device switched on - device switched off link led connection established connection being made no connection 5. Installation 5.1 installation set-up connect the monitor output on a recorder or video output on a camera to the trans...

  • Page 10

    20 english connect a camera to the transmitter to establish wireless transmission of the signal to a recorder or monitor via the receiver. The ir sensor is located in the middle between the leds. Using the receiver, you have the possibility of transmitting the signals from a remote control to the tr...

  • Page 11

    21 english you can assume that safe operation is not possible anymore when x the device shows visible damage, x the device does not function anymore please note: the product is maintenance free for you. Inside the product are no parts that can be checked or repaired, so do not ever open it. 6.2 clea...