1. DL manuals
  2. AC Tool Supply
  3. Protection Device
  4. 3M Full Body Harnesses
  5. User instructions

AC Tool Supply 3M Full Body Harnesses User instructions

Manual is about: 3M Occupational Health and Environmental Safety Fall Protection Equipment

Summary of 3M Full Body Harnesses

  • Page 1

    3m occupational health and environmental safety fall protection equipment user instructions for 3m tm full body harnesses important: keep these user instructions for reference. Full body user instructions harness actoolsupply.Com actoolsupply.Com actoolsupply.Com.

  • Page 2

    Actoolsupply.Com actoolsupply.Com 3m 7552eq elevation safety harness fall protection small 3m 7552eq elevation safety harness fall protection medium 3m 7552eq elevation safety harness fall protection large 3m 7552eq elevation safety harness fall protection xl 3m 7552eq elevation safety harness fall ...

  • Page 3

    1. Compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest. Users must read and understand the user instructions provided with the product and be properly trained by their employer prior to use per osha 29 cfr 1910.66 and 1926.503 or applicable local sta...

  • Page 4

    During the clearance calculation process. 2. Wear proper personal protective equipment when performing inspection, cleaning and maintenance procedures. Safety glasses & gloves are recommended. 3 important before use, the user must read and understand these user instructions. Keep these user instruct...

  • Page 5

    4 up to 400 lb (181 kg) including clothing, tools, etc. 3. Full body harnesses shall be used as part of a personal fall arrest system that limits the maximum free fall distance to 6 ft (1.8 m). If used with appropriate connecting system, full body harnesses may be used with free falls exceeding 6 ft...

  • Page 6

    5 caution: if an energy absorbing lanyard is used in conjunction with a cross-arm anchorage connector, other anchorage extension, vertical lifeline, or horizontal lifeline, the additional length of the anchorage connector, or sag from the lifeline must be taken into consideration during the clearanc...

  • Page 7

    6 free fall to calculate the free fall distance using an energy absorbing lanyard connected to the dorsal d-ring of a full body harness and an anchorage connector that is above the workers shoulders, worker (a), subtract the distance from the d-ring on the harness to the anchorage connector (5 ft) f...

  • Page 8

    7 compatibility all 3m full body harnesses must only be coupled to compatible connectors. Osha 29 cfr 1926.502 prohibits snaphooks from being engaged to certain objects unless two requirements are met: snaphook must be a locking type and must be “designed for” making such a connection. “designed for...

  • Page 9

    8 donning a crossover style full body harness 1. Hold the dorsal (back) d-ring of the harness, located just above the back strap, and shake to allow all straps to fall into place. Make certain straps are not buckled or twisted. 2. Locate the shoulder straps between the dorsal and front d-ring and sl...

  • Page 10

    9 materials webbing all 3m full body harnesses are constructed with 1 ¾ in (44 mm) polyester webbing. The saturn full body harness has a 1 ¾ in (44 mm) nomex® and polyester webbing. The coated web full body harness utilizes a 1 ¾ in (44 mm) polyurethane coated polyester webbing. Hardware all hardwar...

  • Page 11

    10 inspection frequency full body harnesses must be inspected prior to each use, and annually by an osha defi ned “competent person” other than the user. Cleaning, maintenance, storage criteria warning: if inspection reveals any defect, inadequate maintenance, or unsafe condition, remove from servic...

  • Page 12

    11 storage full body harnesses should be stored in a cool, dry place out of direct sunlight. Do not store in areas where damage from environmental factors such as heat, light, excessive moisture, oil, chemicals and their vapors, or other degrading elements may be present. Do not store damaged equipm...

  • Page 13

    12 load indicator label product label product label models and part numbers full body harnesses feather - 1010, 1010e, 1010e-logo, 1010eq, 1010eq-logo, 1010eq-xxl, 1010eq-xxl-logo, 1010e-xxl, 1010e-xxl-logo, 1010f, 1010fe, 1010fe-logo, 1010feq, 1010feq-logo, 1010feq- xxl, 1010feq-xxl-logo, 1010fe-xx...

  • Page 14

    13 logo (l-xl), 1012feq-logo (s-m) ,1012feq-logo-xxl, 1012feq (l-xl), 1012feq (s-m), 1012feq- xxl, 1012fe (s-m), 1012fe-xxl, 1012f-logo (l-xl), 1012f-logo (s-m), 1012f-logo-xxl, 1012f (l-xl), 1012fq-logo (l-xl), 1012fq-logo (s-m), 1012fq-logo-xxl, 1012fq (l-xl), 1012fq (s- m), 1012fq-xxl, 1012f (s-m...

  • Page 15

    14 safelight – 10650, 10650-logo, 10651, 10651-logo, 10810/208512-logo, 10810, 10810-fi, 10810s, 10810/208512, 10855 (s-m), 10855 (l-xl), 10855(xxl), 10855 (xxxl), 10810-logo, 10910, 10910/209512- logo, 10910f, 10910-fi-logo, 10910f-logo, 10910-logo, 10911, 10911f, 10911-fi-logo, 10911f-logo, 10911-...

  • Page 16

    15 1411q-logo, 1450-logo, 1450q, 1450q-logo, 1451-logo, 1451q, 1451q-logo, 1452 (l-xl), 1452 (l-xl)-logo, 1452q (l-xl), 1452q (l-xl)-logo, 1452 (s-m), 1452 (s-m)-logo, 1452q (s-m), 1452q (s-m)-logo, 1452f (l-xl), 1452f (l-xl)-logo, 1452fq (l-xl, 1452fq (l-xl)-logo, 1452f (s-m), 1452f (s-m)-logo, 145...

  • Page 17

    16 product warranty, limited remedy, and limitation of liability warranty: the following is made in lieu of all warranties or conditions, express or implied, including the implied warranties or conditions of merchantability or fitness for a particular purpose. Equipment offered by 3m is warranted ag...