AC Tool Supply S19-320A Installation - Important
2
S19-320A, S19-320D
Installation
10/26/2012
IMPORTANT
Read this installation manual completely to ensure proper installation, then file it with the owner
or maintenance department. Compliance and conformity to drain requirements and other local
codes and ordinances is the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for before discarding
any packaging material. If any parts are missing, do not begin installation until you obtain the
missing parts.
Flush the water supply lines before beginning installation and after installation is complete. Test
the unit for leaks and adequate water flow. Main water supply to the eyewash should be “ON” at
all times. Provisions shall be made to prevent unauthorized shutoff.
The ANSI Z358.1 standard requires an uninterrupted supply of flushing fluid. Bradley plumbed
emergency fixtures require a minimum of 30 PSI (0.21 MPa) flowing pressure. Flushing fluid
should be tepid per ANSI Z358.1.
The inspection and testing results of this equipment should be recorded weekly to verify proper
operation. This equipment should be inspected annually to ensure compliance with ANSI
Z358.1.
Workers who may come in contact with potentially hazardous materials should be trained
regarding the placement and proper operation of emergency equipment per ANSI Z358.1.
Installation
THIS
SIDE
UP
Packing List
•
•
•
•
P.
O.
Bo
x 309
, Meno
monee F
alls,
WI
5305
1
R
TEST
THIS
U
NIT EA
CH
W
EEK
Tes
t-opera
te
va
lv
e(s) e
ac
h
we
ek
and
sign
be
lo
w.
Re
por
t an
y ma
lfun
ction
s imme
dia
te
ly.
Ve
ntil(e) w
öc
he
ntlic
h im
Te
stbe
trieb prüf
en,
be
stätigt
dur
ch
Unter
sc
hrift
. J
eglic
he
Störun
g sof
or
t me
lde
n.
Date
Datum
Date
Signed
Unter
sc
hrift
Signe
Date
Date
Date
Signed
Signed
Signed
DIE
SES GER
ÄT 1ST
W
Ö
CH
ENTLIC
H
ZU
PR
ÜFEN
.
ESSAI
HEBDO
MA
DAIRE
Te
st le
fonc
tionne
me
nt de
s
valves
c
ha
que sema
ine
et
signe en
ba
s.
S'il
y
à
qu
elqu
e
ch
os
e
qui
ne
va
pas
fa
it
un rappor
t imméd
ia
teme
nt.
P.O. BOX 309, MENOMONEE FALLS, WI 53052-0309 USA
TEL: 1-800-BRADLEY FAX: (262-251-5817)
http://www.bradleycorp.com
114-051
Power should be supplied to the alarm by no larger than a 120 volt AC,
15 amp branch circuit with a dedicated circuit breaker or fuse and should
not supply power to any other device. Compliance and conformity to
local codes and ordinances is the responsibility of the installer.
actoolsupply.com
actoolsupply.com