User guide electronic counting scale/balance model sc600 actoolsupply.Com actoolsupply.Com actoolsupply.Com extech sc600 electronic counting weight scale balance.
2 sc600‐eu‐en v1.1 1/14 introduction thank you for selecting the extech instruments model sc600 electronic counting scale/balance. The sc600 is microprocessor controlled and uses a load cell transducer for high accuracy and optimum performance. The sc600 offers a large measurement capacity, high res...
3 sc600‐eu‐en v1.1 1/14 meter description 1. 5‐digit multi‐function lcd display 2. ‘bubble’ leveler 3. Weight platform 4. Ac adaptor jack (9v/300ma) 5. 3.5mm rs‐232 pc interface jack 6. Unit of measure select switch (grams or ounces) 7. Power on‐off switch 8. Tare button 9. Cal (calibration) button ...
4 sc600‐eu‐en v1.1 1/14 operation preparing the sc600 place the sc600 on a firm, level surface. Adjust the rubber pad legs on the bottom of the unit to level; ensure that the sc600 is level before use. The ‘bubble’ level located on the top of the sc600 can be used as an accurate level guide. Remove ...
5 sc600‐eu‐en v1.1 1/14 powering the meter install six (6) 1.5v aa batteries into the battery compartment located on the bottom of the unit. The ac adaptor can also be used to power the unit. The ac adaptor jack is located on the rear of the sc600. Power the unit on or off using the on‐off switch lo...
6 sc600‐eu‐en v1.1 1/14 counter operation for a collection of objects or pieces (each piece having the same weight as the next), the sc600 can calculate the number of these objects in a collection. A group of pieces can be used as a sample example in groups of 10, 20, 50, or 100 pieces. 1. Prepare a...
7 sc600‐eu‐en v1.1 1/14 calibration preparing the calibration standard weights are required for calibration (not supplied). A 200 gram or a 400 gram standard can be used. Warm up the sc600 for at least 30 minutes before starting the calibration. Important calibration note: before calibrating the sc6...
8 sc600‐eu‐en v1.1 1/14 rs‐232 pc interface the sc600 can stream data to a pc via the rear 3.5mm rs232 output jack, the optional 407001‐ usb kit (rs232 to usb cable and driver cd) along with the 407001 software (available free at www.Extech.Com) are required. Battery replacement when the low batte...
9 sc600‐eu‐en v1.1 1/14 specifications display 5‐digit multi‐function lcd digit height: 20.9mm (0.8”) ranges and resolution 0.10 to 600g (resolution: 0.01g) 0.005 to 9.9995 oz. (resolution: 0.0005 oz.) 10.000 to 21.164 oz. (resolution: 0.001 oz.) unit of measure selectable via rear switch (grams/oun...
