1. DL manuals
  2. Acard
  3. Adapter
  4. AEC-6293
  5. User Manual

Acard AEC-6293 User Manual

Manual is about: 1-ch eSATA/ 1-ch SATA/ 1-ch IDE Adapter

Summary of AEC-6293

  • Page 1

    Aec-6293 1-ch esata/ 1-ch sata/ 1-ch ide adapter user's manual version: 1.0 copyright©2008 acard technology corp. Release: march 2008.

  • Page 2: Copyright And Trademarks

    Copyright and trademarks the information of the products in this manual is subject to change without prior notice and does not represent a commitment on the part of the vendor, who assumes no liability or responsibility for any errors that appear in this manual. Acard is the trademark of acard techn...

  • Page 3: Table Of Contents

    Table of contents chapter 1 introduction ............................................................... 1.1 overview ............................................................................ 1.2 features ............................................................................ 1.3 specificati...

  • Page 4

    Weee statement in order to cope with the increasing waste electrical and electronic equipment, reduce the use of landfill and incinerator, and prevent the harmful matter of waste equipment from entering the environment, the european union (eu) has set the directive on waste electrical and electronic...

  • Page 5

    Weee бюлетень ЧтобЫ сρaвиться с увеличивающимся ненуҗным электрическим и электронным оборудованием , уменъшите использование закапывания мусора и использования установки для сжигания отходов, препятствуйте вредному выбросам загрязнять окружановки среду, Европейский союз (ec) установил Директиву по Н...

  • Page 6: 1.4 Os Compatibility

    5 aec-6293 manual 1.4 os compatibility windows 32-bit 2000 /server 2003/ xp/ vista windows 64-bit server 2003/ xp/ vista chapter 1 introduction 1.1 overview acard aec-6293 is a 32-bit/100mhz, 1-ch esata/ 1-ch sata/ 1-ch pata and high-performance pci-x to sata ii/ pata card. Within acard’s latest cut...

  • Page 7: 1.5 Package And Others

    6 aec-6293 manual esata connector ide connector sata connector 1.5 package and others 1.5.1 package aec-6293 × 1 internal serial ata cable × 1 ide cable × 1 acard support cd × 1 user's manual × 1 1.5.2 spec parameters temperature: operation: -20°c to 65°c non-operation: -20°c to 65°c humidity: 0% to...

  • Page 8

    7 aec-6293 manual pci slot 4. Screw the aec-6293 onto the chassis. 5. Connect aec-6293 with a sata /ide hard drive via sata /esata /ide cable and connect the power cord to the hard drive properly. Notice: the serial ata cable is used to transfer data in very high frequency. It is suggested no to con...

  • Page 9: Chapter 3  Bios Setup

    Chapter 3 bios setup after installing aec-6293 and booting the system, you will see the following figure appear immediately after the motherboard post. The figure indicates your card bios version, hard drive information etc. 8 aec-6293 manual please press or to enter bios setup utility..

  • Page 10

    9 aec-6293 manual 3.1 description of functions on bios screen use , to change items, press to select and confirm, and press to cancel or exit (return to previous screen). 3.1.1 information shows all attach drives information. 3.1.2 properties 3.1.2.1 int 13h bios enable this function allows you to e...

  • Page 11

    Chapter 4 system & driver installation driver installation varies somewhat in different operating systems. You can install the driver of aec-6293 in an existing os, or install a new os to the hard drives connected to aec-6293. 10 aec-6293 manual 4.1 windows 2000/xp/2003 here we only take windows xp ...

  • Page 12

    11 aec-6293 manual 5. After the wizard finds the driver, click “next” to install it. 6. Click “continue anyway” to continue the installation if the screen come out. 7. Follow the directions. The system will complete the setup automatically. 8. After setup, please click “yes” and re-boot the system..

  • Page 13

    12 aec-6293 manual 9. In “system properties” click “hardware”. 11. Under “scsi and raid controllers”, double click “aec-6293 2-ch sata raid & 1-ch ide adapter” to see if the card is installed successfully. Notice: during driver installation, if you encounter the problem of windows logo, please click...

  • Page 14

    13 aec-6293 manual 4.2 windows vista 4.2.1 install the driver pease follow the steps below to install the driver of aec-6293. 1. After installing aec-6293, boot up the computer and enter windows vista. 2. The system will detect a new device and the found new hardware pops up. Click “locate and insta...

  • Page 15

    14 aec-6293 manual 7. Click to finish installation and reboot the system. 8. Check “control panel” and “device manager”, under “storage controllers” double click “acard aec-6293 2-ch sata & 1-ch ide adapter” to see if the card is installed successfully. Notice: during driver installation, if you enc...

  • Page 16

    Chapter 5 troubleshooting after installing aec-6293, if it cannot work normally, please follow the checklist given below to solve the problems. A, can not boot up the pc after install the aec-6293 hba. It could be: 1. Aec-6293 touch area with pci slot are not clean, please uses rubber to clean out t...

  • Page 17: Technical Support Form

    Technical support form email address: support@acard.Com website: http://www.Acard.Com model name* (ex: aec-6293) firmware version* system configuration motherboard/system model* scsi host adapter/chip brand & model* scsi host bios version other i/o card* operating system* sata hdd brand & model* sat...