Acard ARS-2021D User Manual - 6.4   Verify

Manual is about: DVD Standalone DVD Link Host Copy Smart Plus

Summary of ARS-2021D

  • Page 1

    Ars-2021d/2021ds copy smart plus copyright ©2002 acard technology corp. User’s manual ver: 1.0 release: july 2002 dvd standalone dvd link host.

  • Page 2: Copyright and Trademark

    Copyright and trademark the information in this manual is subject to change without prior notice and does not represent a commitment on the part of vendor, who assumes no liability or re- sponsibility for any errors that may appear in this manual. Acard and scsi are the trademarks of acard technolog...

  • Page 3: Table of Contents

    Table of contents chapter 1 introduction ................................................ 7 1.1 features ........................................................................ 7 1.2 specification ................................................................. 7 chapter 2 installation...............

  • Page 4

    6.9.5 select partition ............................................................................... 38 6.9.6 select src drive .............................................................................. 38 6.10 edit track (for cd only) ...........................................39 6.10.1 cd to ...

  • Page 5

    6.11.7 auto compare .............................................................................. 55 6.11.8 auto prescan ................................................................................ 55 6.11.9 eject disc ...............................................................................

  • Page 6

    7.4 about buttons ............................................................ 72 7.5 about dvd writer not readable .............................. 72 7.6 about high failure rate .............................................72 7.7 about firmware update .............................................72 ...

  • Page 7: Chapter 1   Introduction

    7 ars-2021d/2021ds manual chapter 1 introduction ars-2021d and ars-2021ds are different in use. The former one is simply a standalone device while the latter one can also be linked with a computer in addition to being standalone. Both of them are designed for copying dvd in video, audio or data form...

  • Page 8

    8 ars-2021d/2021ds manual humidity 15% to 90% dimension l 285 mm w 190 mm h 165 mm connector 2 40-pin internal ide connectors 1 44-pin internal ide connector 2 50-pin external scsi connectors cable ata-66 (below 46 cm) dvd dvd-5 (ss/sl)*, dvd-9 (12ss/dl), dvd-10 (ds/ sl),dvd-14 (ds/ml), dvd-18 (ds/s...

  • Page 9: Chapter 2   Installation

    9 ars-2021d/2021ds manual chapter 2 installation before installing ars-2021d/2021ds, please note that there are two kinds of pack- ages. One is a whole copying system, and the other is a system without dvd writer. 2.1 a whole copying system l unpack the package. L check if there is any defect or mal...

  • Page 10

    10 ars-2021d/2021ds manual step 1: remove the rear cover of ars-2021d/2021ds. Step 2: remove the outer shell of ars-2021d/2021ds..

  • Page 11

    11 ars-2021d/2021ds manual 2.4 installing a dvd writer step 1: adjust your dvd writer as master. Step 2: place the dvd writer onto the lower bay of ars-2021d/2021ds..

  • Page 12

    12 ars-2021d/2021ds manual step 3: connect cn5 on the cable of ars-2021d/2021ds to the 40-pin connector of dvd writer. Step 4: connect the connector on the power cord of ars-2021d/2021ds to the 4-pin connector of dvd writer..

  • Page 13: 2.5   Installing A Dvd-Rom

    13 ars-2021d/2021ds manual step 5: screw ars-2021d/2021ds alongside. 2.5 installing a dvd-rom step 1: adjust your dvd-dom as master..

  • Page 14

    14 ars-2021d/2021ds manual step 2: place the dvd-rom onto the upper bay of ars-2021d/2021ds. Step 3: connect cn4 on the cable of ars-2021d/2021ds to the 40-pin connector of dvd-rom..

  • Page 15

    15 ars-2021d/2021ds manual step 4: connect the connector on the power cord of ars-2021d/2021ds to the 4-pin connector of dvd-rom. Step 5: connect the audio cable to the audio port of dvd-rom..

  • Page 16

    16 ars-2021d/2021ds manual step 6: screw ars-2021d/2021ds alongside. 2.6 installing a 2.5” hdd step 1: screw the 2.5” hard disk onto two pieces of iron..

  • Page 17

    17 ars-2021d/2021ds manual step 2: screw the 2.5” hard disk with two pieces of iron onto the rack. Step 3: connect cn3 on the 44-pin cable to the connector of the hard disk..

  • Page 18: 2.7   After Installation

    18 ars-2021d/2021ds manual 2.7 after installation step 1: place the outer shell back. Step 2: screw it from back..

  • Page 19

    19 ars-2021d/2021ds manual step 3: place the rear cover back and screw it. Step 4: it is done..

  • Page 20: 3.1   Buttons and Lcd

    20 ars-2021d/2021ds manual chapter 3 basic instructions 3.1 buttons and lcd there are four buttons and an lcd on the panel of ars-2021d/2021ds. They are described as follows. 1 2 4 3 5 1. It shows all functions and messages. 2. It is used to scroll up through functions or menus. 3. It is used to scr...

  • Page 21

    21 ars-2021d/2021ds manual 3. 4. Detect drives 1. Copy 3.2 about hdd installation in subsection 2.6 we illustrated how to install a 2.5” hard disk to ars-2021d/ 2021ds. It is not necessary, but with a 2.5” hard disk you can use and enjoy the function of image. In other words, you have one more choic...

  • Page 22

    22 ars-2021d/2021ds manual l switch to function 1 copy by pressing ▲ . Place a blank dvd disk into the dvd writer, and press ent to start copying. L when copying comes to an end, the passed dvd will eject automatically. The default is eject automatically, but you can change it. L the failed dvd will...

  • Page 23: Chapter 4   Board Layout

    23 ars-2021d/2021ds manual chapter 4 board layout the board layout of ars-2021d/2021ds is shown as follows. Ultra scsi link host ide port for dvd writer (connect to cn5) ide port for dvd-rom (connect to cn4) ide port for 2.5” hdd (connect to cn3) power cable power cable (connect from 44-pin ide cabl...

  • Page 24: Chapter 5   Link Host

    24 ars-2021d/2021ds manual chapter 5 link host there are two important steps to follow in connecting ars-2021ds to a computer. L be sure that your computer is installed with a scsi host adapter, and the adapter is lun enabled. L connect ars-2021ds to the scsi host adapter with a scsi cable. 5.2 conf...

  • Page 25: 5.4   Software Requirements

    25 ars-2021d/2021ds manual 5.4 software requirements software requirements include os and utilities. 1. Os: windows 95/98/me/xp, or winsows nt/2000 2. Utilities: ha! Cd burner (+dvd) hardware requirements include cpu, hdd and interface. 1. Cpu: pentium-100/ram: 32mb 2. Hdd: 75mb or above 3. Interfac...

  • Page 26: Chapter 6   Functions

    26 ars-2021d/2021ds manual chapter 6 functions there are 12 functions: copy, test, test & copy, verify, compare, prescan, disc info, select source, image, edit track, setup and advanced setup. Among the 12 functions, edit track is designed exclusively for editing a collection of favorite songs from ...

  • Page 27: 6.2   Test

    27 ars-2021d/2021ds manual when copying is in progress, mb and time will decrease whereas the percentage of completion increase. When copying comes to an end, lcd will show the results as follows. The passed dvd will eject automatically. 1.Copy ok: 01 6.2 test function 2 test is to simulate the copy...

  • Page 28: 6.3   Test & Copy

    28 ars-2021d/2021ds manual lcd will show the testing information as follows. Testing- dvd 0% 4213.4mb d:20:15 when the test comes to an end, lcd will show the results as follows. 2.Test ok: 01 stopping the test halfway does not affect the dvd disk, but if the dvd rewriteable disk contains important ...

  • Page 29: 6.4   Verify

    29 ars-2021d/2021ds manual when the test finishes, actual copying will begin as shown below. Copying- dvd 0% 4213.4mb d:20:15 when the whole process finishes, lcd will show the results as follows. 3.Test & copy ok: 01 6.4 verify function 4 verify is to examine if the target dvd can be read correctly...

  • Page 30: 6.5   Compare

    30 ars-2021d/2021ds manual when verification comes to an end, lcd will show the results as follows. 4.Verify ok: 01 6.5 compare function 5 compare is to make a comparison between the source dvd and the target dvd after copying. Select function 5. Put the source dvd onto dvd-rom and the target dvd on...

  • Page 31: 6.6   Prescan

    31 ars-2021d/2021ds manual press ent to see the details of source 1 as shown below. Src: 01 dvd-rom total: 4213.4mb press ent to see the details of source 2. If the comparison is identical, lcd will show the message as follows. Src: 02 dvd-rw identical if comparison fails, lcd will show the failure....

  • Page 32: 6.7   Disc Info

    32 ars-2021d/2021ds manual press ent to prescan. Lcd will show the scanning information as follows. Scaning- dvd 0% 4213.4mb 40:40 when scanning finishes, and the source dvd can be read correctly, lcd will show the results as follows. Prescan ok! 6.7 disc info function 7 disc info is to show the bas...

  • Page 33: 6.8   Select Source

    33 ars-2021d/2021ds manual 6.8 select source function 8 select source is to let you select the data on dvd-rom, dvd writer or hdd as the source from which copying will be done. 8.Select source select function 8. Press ent, and then press ▲ ▼ to select the source as shown below. Src: dvd-rom 01 ide1 ...

  • Page 34: 6.9   Image

    34 ars-2021d/2021ds manual 6.9 image function 9 image is valid only when you have installed a hard disk. This function includes 6 parts. They are load, delete image, image info, compare image, select partition and select src drive. The loaded data is called an image file. Select function 9. 9.Image ...

  • Page 35

    35 ars-2021d/2021ds manual after the image file is successfully loaded, lcd will show the results as follows. Image load ok if there is an image file existing in the current partition, the system will ask you whether to overwrite it or not. Please use ▲ ▼ to confirm yes or no. Image exists overwrite...

  • Page 36

    36 ars-2021d/2021ds manual after the image file is deleted, lcd will show the results as follows. Partition a: image is deleted 6.9.3 image info this function is to show the basic information of an image file stored in a particular partition. First, select the function by pressing ▼ . 9-03.Image p: ...

  • Page 37

    37 ars-2021d/2021ds manual press ent, and lcd will show the comparison information as follows. Compare- dvd 0% 4213.4mb 1:05:06 when comparison comes to an end, lcd will show the results as follows. Compare ok: 1 fail: 0 diff: 0 press ent to see the details of source 1 as shown below. Src: 01 dvd-ro...

  • Page 38

    38 ars-2021d/2021ds manual 6.9.5 select partition this function is to select a partition in the hard disk. First, select the function by pressing ▼ . 9-05.Image p: a select partition after installing a hard disk, ars-2021d/2021ds will format it automatically. Each partition will occupy 5gb. The numb...

  • Page 39

    39 ars-2021d/2021ds manual first, select the function by pressing ▼ . 9-06. Image p: a image src drive then, use ▲ ▼ to select dvd-rom or dvd writer as the source. Select img src: 01 ide1 dvd-rom after selecting the source such as dvd-rom, you can press ent, and lcd will show the message as follows....

  • Page 40

    40 ars-2021d/2021ds manual select function 10. 10. Edit track 6.10.1 cd to cd on the above figure press ent, and you will enter the following figure.Here the function cd to cd is to let you select a track or more from cd-rom, and then copy into a blank cd-r/rw. 10-01. Edit track cd to cd edit on the...

  • Page 41

    41 ars-2021d/2021ds manual after selecting, please use ▲ to move to the “end” menu as shown below. Select track: end 1trk03:25 press ent to finish the cd editing, and use ▲ ▼ to confirm yes or no. End edit disc and burn?Yes lcd will show the copying information as follows. Copying- 24x edit 1/10 - >...

  • Page 42

    42 ars-2021d/2021ds manual the system will ask if you want to keep editing. Please use ▲ ▼ to confirm yes or no. As shown below. Continue edit next disc?Yes if you want to keep editing, the current source cd will eject auctomatically, and the system will ask you to insert another new cd as shown bel...

  • Page 43

    43 ars-2021d/2021ds manual press ent to finish the cd editing, and use ▲ ▼ to confirm yes or no. End edit disc and burn?Yes lcd will show the copying information as follows. Copying- 24x edit 2/10 - > 2/2 on the above figure 2/2 means the second track of all tracks we have selected, and so far we ha...

  • Page 44

    44 ars-2021d/2021ds manual on the above figure press ent. The system will ask if you want to close all cds’ sessions. Please use ▲ ▼ to confirm yes or no as shown below. Close all disc’s session? Yes after deciding to close, lcd will show the message as follows. Closing session please wait--- 6.10.2...

  • Page 45

    45 ars-2021d/2021ds manual suppose we decide to select the first track, then press ent. A “+” will appear beside 1/10 as shown below. But pressing ent again may cancel the selection. Select track: +1/10 03:25 after selecting, please use ▲ to move to the “end” menu as shown below. Select track: end 1...

  • Page 46

    46 ars-2021d/2021ds manual the system will ask if you want to keep editing. Please use ▲ ▼ to confirm yes or no. As shown below. Continue edit next disc?Yes if you want to keep editing, the current source cd will eject auctomatically, and the system will ask you to insert another new cd as shown bel...

  • Page 47

    47 ars-2021d/2021ds manual then, the track as an image file will be loaded into hdd. Lcd will show the loading information as follows. Load- p0 -24x edit 2/10 - > 2/2 when loading comes to an end, lcd will show the message as follows. Image load ok the system will ask if you want to keep editing. Th...

  • Page 48

    48 ars-2021d/2021ds manual when burning finishes, lcd will show the results as follows. Burn complete ! Ok: 01 on the above figure press esc to enter the following figure. Now press ▼ to move the data from hdd template into a certain partition. Burn or move to partition? Move after pressing ▼ , you ...

  • Page 49

    49 ars-2021d/2021ds manual if the chosen partition has contained image data, the system will ask to overwrite or keep the data. Here please use ▲ to overwrite. Image exists overwrite?Yes after pressing ▲ , lcd will show the moving information as follows. Moving to p: a 0% when moving finishes, lcd w...

  • Page 50

    50 ars-2021d/2021ds manual use ▲ ▼ to select the track you want to play. Select track: 1/10 03:25 after selecting and pressing ent, lcd will show the playing information below. Playing track-1 00:00 / 03:25 6.10.4 close session this function is to close a cd and let no data written into. After closi...

  • Page 51: 6.11   Setup

    51 ars-2021d/2021ds manual after pressing ent, lcd will show the message as follows. Closing session please wait--- when closing finishes, lcd will show the results as follows. Closing complete ok :1 fail :0 6.11 setup function 11 setup lets you change the default settings. Once you change a setting...

  • Page 52

    52 ars-2021d/2021ds manual 6.11.1 language on the above figure press ent, and you will enter the following figure. The function language lets you select a language in which messages can be shown on lcd. 11-01. Setup language press ent to enter the following figure. Here lcd only supports english. La...

  • Page 53

    53 ars-2021d/2021ds manual 6.11.3 read speed on the above figure press esc and ▼ to enter the following figure. The function read speed lets you control the reading speed of target dvd. 11-03. Setup read speed press ent to enter the following figure. The default is maximum, but there are still other...

  • Page 54

    54 ars-2021d/2021ds manual 6.11.5 startup menu on the above figure press esc and ▼ to enter the following figure. Startup menu lets you select any one of the functions except adv setup as the first item appearing on the menu whenever you turn on ars-2021d/2021ds. 11-05. Setup startup menu press ent ...

  • Page 55

    55 ars-2021d/2021ds manual 6.11.7 auto compare on the above figure press esc and ▼ to enter the following figure. Auto compare is to compare automatically the source dvd and the target dvd after copying. 11-07. Setup auto compare press ent to enter the following figure. The default is off. Press ▼ t...

  • Page 56

    56 ars-2021d/2021ds manual 6.11.9 eject disc on the above figure press esc and ▼ to enter the following figure. Eject disc provides three choices. They are eject good only, eject all disc, and do not eject. Eject good only means that the dvd will eject automatically only when it is copied successful...

  • Page 57

    57 ars-2021d/2021ds manual press ent to enter the following figure. The default is on. Press ▼ to select off. Burn on the fly on if ars-2021d/2021ds doesn’t connect with a hard disk, lcd will show the message as follows. No valid hdd ! 6.11.11 burn mode on the above figure press esc to return to fun...

  • Page 58

    58 ars-2021d/2021ds manual 6.11.12 button sound on the above figure press esc and ▼ to enter the following figure. Button sound lets you control the sound of a button when you press it. 11-12. Setup button sound press ent to enter the next figure. The default is on. Press ▼ to select off. Button sou...

  • Page 59

    59 ars-2021d/2021ds manual press ent to enter the next figure. Dvd-rom dvd-116 1.22 press ▼ twice to enter the next figure. 02 ide2 master dvd-rw : pioneer press ent to enter the next figure. Dvd-rw dvr-103 1.80 6.11.14 system info on the above figure press esc and ▼ to enter the following figure. S...

  • Page 60

    60 ars-2021d/2021ds manual press ent to enter the next figure. Winbond: w29c040 2002 / 5 / 27 acard 6.11.15 quick erase on the above figure press esc and ▼ to enter the following figure. Quick erase is to erase the data on the dvd rewriteable disk quickly. 11-15. Setup quick erase press ent to enter...

  • Page 61

    61 ars-2021d/2021ds manual 6.11.16 full erase on the above figure press esc and ▼ to enter the following figure. Full erase is to erase the data on the dvd rewriteable disk completely. Compared with quick erase, full erase takes longer time to do the job. 11-16. Setup full erase press ent to enter t...

  • Page 62: 6.12   Adv Setup

    62 ars-2021d/2021ds manual 6.12 adv setup on the above figure press esc to return to function 11. Then, press esc for 2 seconds to enter function 12 as the following figure shows. Function 12 adv setup lets you change the system configuration. This function includes 13 parts. They are underrun prote...

  • Page 63

    63 ars-2021d/2021ds manual 6.12.2 overburn on the above figure press esc and ▼ to enter the following figure. Overburn lets you decide whether to copy beyond the limit of the cd or not. 12-02. Adv setup overburn press ent to enter the following figure. The default is off. Press ▼ to select on. Overb...

  • Page 64

    64 ars-2021d/2021ds manual 6.12.4 format hdd on the above figure press esc and ▼ to enter the following figure. Format hdd is to partition the hard disk. But before formatting, all data on the hard disk will be deleted. 12-04. Adv setup format hdd press ent to enter the next figure. Use ▲ ▼ to confi...

  • Page 65

    65 ars-2021d/2021ds manual press ent to enter the next figure. Use ▲ ▼ to confirm disk or parti. Verify disk or partition? Disk press ent to verify. After verification lcd will show the results as follows. Verify hard disk ok! 6.12.6 burn-in on the above figure press esc and ▼ to enter the following...

  • Page 66

    66 ars-2021d/2021ds manual press ent and use ▲ ▼ to select the time of simulation such as 1, 2, 3...1000 or run continuous. The figure below shows run continuous. Sel burn-in num: run continuous press esc, ent, ▼ to select erase & copy as the following figure shows. Erase & copy is to erase and writ...

  • Page 67

    67 ars-2021d/2021ds manual you can get the newest firmware version from acard by e-mail, or download it directly from the web site: http://www.Acard.Com then, unzip the file “cdxxx.Bin” and copy it into a blank dvd. After placing the dvd on the dvd-rom , press ent. The system will begin searching th...

  • Page 68

    68 ars-2021d/2021ds manual press ent to enter the next figure. Follow the instructions on lcd to do the button test. After that, the system will do the self-test of sdram, the hardware connection test and flash test. All test results will be shown on lcd. It is the easiest way to know if the system ...

  • Page 69

    69 ars-2021d/2021ds manual when default loading finishes, lcd will show the results as follows. Load default ok 6.12.11 cd+g on the above figure press esc and ▼ to enter the following figure. Cd+g is a kind of special copying format. This function supports the special format. 12-11. Adv setup cd+g p...

  • Page 70

    70 ars-2021d/2021ds manual press ent to enter the next figure. The default is off. Press ▼ to select on. Isrc off 6.12.13 switch link-host on the above figure press esc and ▼ to enter the next figure. Switch link-host lets you switch to the link-host mode if your 2021ds has connected with a pc. 12-1...

  • Page 71: Chapter 7   Troubleshooting

    71 ars-2021d/2021ds manual chapter 7 troubleshooting 7.1 about lcd after powering on if there is no lcd, please check if the connection of power cord is frim and the environment of power outlet is normal. 7.2 about error messages during copy, test, compare and verify, etc. If you press esc to abort,...

  • Page 72: 7.4   About Buttons

    72 ars-2021d/2021ds manual 7.4 about buttons if you press any one of the four buttons on the panel, but there is no response, it is perhaps that the button cannot function well. Please inspect the jumper setting. 7.5 about dvd writer not readable after copying if the dvd writer is unreadable, please...

  • Page 73

    73 ars-2021d/2021ds manual 7.8 about function 12 and cancellation if you want to execute function 12 advanced setup, you can press esc for 2 seconds. And during operation if you want to cancel a function like copy, test, verify and so on, you can press esc for 2 seconds, too..

  • Page 74

    74 ars-2021d/2021ds manual appendix 1 list of functions 4 verify 5 compare 6 prescan 7 disc info 8 select source 9 image (it works only when a hard disk is connected) 9.1 load 9.2 delete image 9.3 image info 9.4 compare image 9.5 select partition (each partition is 5gb) 9.6 select src drive 10 edit ...

  • Page 75

    75 ars-2021d/2021ds manual 11.10 burn on the fly (default is on) 11.11 burn mode (default is dao) 11.12 button sound (default is on) 11.13 device info 11.14 system info 11.15 quick erase 11.16 quick erase 12 adv setup 12.1 underrun protect (default is on) 12.2 overburn (default is off) 12.3 read err...

  • Page 76: Appendix  2   Lcd Messages

    76 ars-2021d/2021ds manual appendix 2 lcd messages 1. Normal conditions: initialize sdram............................................Initialize the memory of the system. Detect drives..............................Detect what drives are connected with the system. User abort!.............................

  • Page 77

    77 ars-2021d/2021ds manual press a key to eject good disc... Press any ket to eject the good disc after copying press a key to eject fail disc......Press any key to eject the failed disc after copying. Dvd-rw does not support the func.......... Dvd-rw doesn’t support this function. Hold esc to exit....

  • Page 78

    78 ars-2021d/2021ds manual verify hard disk ok!................................... The hard disk is verified successfully. Verify hard disk fail!............................ The hard disk is not verified successfully. Verify partition header!.................................................. Verify ...

  • Page 79

    79 ars-2021d/2021ds manual check sum error!.................................................. The udpated firmware has errors. Source can’t be hard disk!.......During comparison the source cannot be hard disk. Last update f/w ok!................................... The firmware is updated successfull...

  • Page 80

    80 ars-2021d/2021ds manual technical support form email: support@acard.Com http://www.Acard.Com model ars-2021d/2021ds f/w version channel dvd-rom dvd writer hard disk model/type capacity firmware version others problem description model f/w version mal2021dsxse10-0