1. DL manuals
  2. Accelerated
  3. Network Router
  4. 6300-CX
  5. User Manual

Accelerated 6300-CX User Manual

Other manuals for 6300-CX: Customer Setup Instructions
Manual is about: Cellular Extender

Summary of 6300-CX

  • Page 1

    Accelerated concepts, inc. ©2015 version 20150928 6300-cx user’s guide ©2015 accelerated concepts, inc. All rights reserved. Accelerated concepts, the accelerated logo and all other accelerated concepts marks contained herein are trademarks of accelerated concepts. All other marks contained herein a...

  • Page 2

    Accelerated concepts, inc. ©2015 6300-cx user’s guide accelerated.Com preface accelerated concepts reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. ©2015 accelerated concepts,...

  • Page 3

    Accelerated concepts, inc. ©2015 6300-cx user’s guide accelerated.Com warning caution warning caution to comply with fcc/ic rf exposure limits at least 20cm separation distance must be maintained between any antenna of the unit and any part of the user at all times. Do not use an antenna that wasn’t...

  • Page 4

    Accelerated concepts, inc. ©2015 6300-cx user’s guide accelerated.Com contents what’s in the box................................................................................ 4 ports and connectors.......................................................................... 5 device status..............

  • Page 5

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 4 of 30 accelerated.Com model 6300-cx temporary battery pack ethernet cable 2 antennas passive power over ethernet (poe) injector cable mounting bracket 6300-cx welcome card universal power supply unit mounting accessories 2 wide clips 2 screws 2...

  • Page 6

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 5 of 30 accelerated.Com ports and connectors back of 6300-cx antenna connector 1 attach both of the included antennas. Antenna connector 2 sim slot wan port erase button power socket.

  • Page 7

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 6 of 30 accelerated.Com device status initializing or starting up. Solid yellow in the process of connecting to the cellular network and to a device on its ethernet port. Is connected to 2g or 3g and in the process of connecting to a device on it...

  • Page 8

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 7 of 30 accelerated.Com signal strength signal bars dbm signal strength percent quality -113 to -99 0-23% bad -98 to -87 24-42% marginal -86 to -76 43-61% ok -75 to -64 62-80% good -63 to -51 81-100% excellent.

  • Page 9

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 8 of 30 accelerated.Com initial setup back of 6300-cx insert the activated sim card provided by your cellular network operator. You should hear a click sound once the sim is completely inserted. Attach both of the included antennas; both antennas...

  • Page 10

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 9 of 30 accelerated.Com site survey a cellular site survey is not necessary if your anticipated installation location is known to have strong cellular signal strength. If you are unsure of available cellular signal strength or are choosing betwee...

  • Page 11

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 10 of 30 accelerated.Com site survey troubleshooting if you are unable to verify a location with a strong cellular signal: • verify your sim has been activated with your cellular operator. • if cellular signal isn’t indicated on the accelerated 6...

  • Page 12

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 11 of 30 accelerated.Com physical installation connecting to the site network with local power using an ethernet cable, connect the wan port on the accelerated 6300-cx to your site gateway. By default a dhcp request will be sent to the wan ethern...

  • Page 13

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 12 of 30 accelerated.Com connecting to the site network with remote power if your device needs to be positioned some distance from either the nearest ac power outlet or site network equipment/router using the included passive power-over-ethernet ...

  • Page 14

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 13 of 30 accelerated.Com remote power trouble shooting on the end of the poe injector cable (see diagram) there are two leds. The red led marked dc in will be illuminated if the 6300-cx power supply unit (psu) in plugged into an ac power outlet a...

  • Page 15

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 14 of 30 accelerated.Com configuring device network managed configuration your accelerated 6300-cx has the capability to automatically sync and receive all settings from a centralized cloud management tool, accelerated view™. The accelerated view...

  • Page 16

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 15 of 30 accelerated.Com troubleshooting resetting your device to reset the device to factory default settings, press the reset/erase switch on the rear of the device. This will erase all device specific settings and firmware updates and restore ...

  • Page 17

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 16 of 30 accelerated.Com out of band sms commands a set of emergency remote commands can be sent via sms to the device to provide out-of-band (oob) recovery for the device. These sms commands allow you to perform actions such as factory resets, r...

  • Page 18

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 17 of 30 accelerated.Com advanced configuration using accelerated view ™ the following accelerated view actions are typically only performed by your network administrator. Using accelerated view to centrally manage your device is recommended. If ...

  • Page 19

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 18 of 30 accelerated.Com defining a custom apn if your device is unable to sync with accelerated view because the device cannot establish a cellular connection without a custom apn refer to managing device locally section. 1. Login to accelerated...

  • Page 20

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 19 of 30 accelerated.Com establishing wan connectivity via ethernet port in order to provide a cellular connection to client devices, the accelerated 6300-cx can be configured either in the default passthrough (i.E. Bridge) mode or dhcp server/ro...

  • Page 21

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 20 of 30 accelerated.Com router mode in this mode, the device operates as a standard dhcp router. The device will be configured to hand out a range of lan ip addresses to client devices connected on its ethernet port. Standard router options are ...

  • Page 22

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 21 of 30 accelerated.Com managing device locally the following accelerated view actions are typically only performed by your network administrator. Note: using accelerated view to centrally manage your device is recommended. If you are not using ...

  • Page 23

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 22 of 30 accelerated.Com manually configuring pc to connect to device to manually connect to the device, you must manually set an ip address on your pc to be able to communicate with the accelerated 6300-cx. 1. Select the properties of the releva...

  • Page 24

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 23 of 30 accelerated.Com manually configuring pc to connect to device to manually connect to the device, you must manually set an ip address on your pc to be able to communicate with the accelerated 6300-cx. 2. Click the internet protocol version...

  • Page 25

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 24 of 30 accelerated.Com logging into device to manually connect to the device, you must manually set an ip address on your pc to be able to communicate with the accelerated 6300-cx. 1. Open the web browser on the pc and type in the address bar, ...

  • Page 26

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 25 of 30 accelerated.Com advanced local configuration once logged in via the local web interface you must enable local management of the device to modify settings for the cellular and ethernet interfaces. 1. Uncheck box next to “enable central ma...

  • Page 27

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 26 of 30 accelerated.Com upgrading firmware 1. Download the appropriate firmware file from accelerated. 2. Connect to the device’s web ui by connecting your pc to the wan ethernet port of the device and then going to http://192.168.210.1. 3. Sele...

  • Page 28

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 27 of 30 accelerated.Com faqs how do i factory reset the accelerated 6300-cx? 1. Ensure that the device has been powered on for at least 30 seconds. 2. Briefly press the erase button located on the back of the device. What ip address does the acc...

  • Page 29

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 28 of 30 accelerated.Com regulatory fcc this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harm...

  • Page 30

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 29 of 30 accelerated.Com software licenses accelerated concepts, inc. Source code is copyrighted and its software is licensed under a number of license agreements. Some components of the software are licensed under the gnu general public license,...

  • Page 31

    Accelerated concepts, inc. ©2015 6300-cx user’s guide 30 of 30 accelerated.Com technical support if there are any problems installing any of our products and technical assistance is required, please call or email our help desk. Support@accelerated.Com accelerated.Com/support support hours are 9:00am...