Table of contents mpc-68k system construction example ....................................................................... 2 mpc-68k series ~16-bit cpu controller ~ ................................................................. 4 mpc-lnk ...........................................................
-1- please try controlling by mpc. Your “device” will change from that day. Mpc uses the latest flash rom! Equipped with an on-board rom-conversion function, it is a board-type controller with complete protection against noise (rs-232c and pulse generation are also photo-isolated). Mpc is also equip...
-2- mpc-68k system construction example * connecting two slots or more may require a terminator-compatible board mbk-68k. Dc 12v ~ dc 24v is supplied to each board of the mpc series, rs-iso, and pif-422. For the details of mpc program and hardware, see the “user’s manual”. Consultation on the mpc co...
-3- t ou ch p ane l d is p la y c onnec te d wit h m b k-68 vi a rs42 2 at 38 .4 k bps. Using t he st andar d on /o ff c omm and supporti ng 68k, a pp licat ions ut ili zin g a tou ch pa nel ca n be co ns tr uct ed ! 9 8/9 digi tal g p7 0 se ries supported e the rn et (tc p /ip ) = > rs co n vert er...
-4- mpc-68k series ~16-bit cpu controller ~ mpc-684 high-speed cpu board 4 outputs, 8 inputs [characteristics] this is a high-speed cpu board equipped with two rs-232c channel. By its installed interpreter (advfsc ® ), programming is possible in a basic-like environment. Mpc-683 supports an executio...
-5- mpg-68k pg board (100k) 4-axis output, 8-origin input [characteristics] this is a board equipped with 4-axis simultaneous-control pulse generation. By an interpreter (advfsc ® ) installed on mpc-68k, programming is possible in a basic-like environment. The maximum pulse rate is 100 kpps (for 3-a...
-6- iop-048 24-point photocoupler input board / 24-point transistor output board [characteristics] this is a dedicated input/output board equipped with 24-points for each input and output. Each input/output is equipped with an led monitor. The input and output interfaces have equivalent specificatio...
-7- mbk-68 multifunction board rs-422 * 2ch [characteristics] mbk-68 is a function-addition board of mpc-68k and mpc-683. The following functions are added. Please insert this board to the right end of the rack (on the opposite side of cpu). Bus terminator is added, making a large-scale system more ...
-8- mpc-lnk mpclnk is a network board with an objective of sharing memory data and bit-unit information. By using mpclnk, connected equipment (personal computers and mpc-68k) can share 249-byte memory. Also, because a function is included for transferring data by block to a specified address, indivi...
-9- mpc-lnk, pc-lnk communication board (98 c-bus standard) / pc-lnk (isa) [characteristics] mpc-lnk (pc-lnk) is a data network connecting our mpc-68k, nec pc98 series, and dos/v machines. Unlike networks by other specifications, it does not let the host generate interruptions or consume system memo...
-10- mpc-816 series ~ 8-bit cpu controller ~ mpc-816k main cpu board 8 outputs, 16 inputs [characteristics] this is a cpu board equipped with the i/o for control. By its installed interpreter (tnyfsc), programming is possible in a basic-like environment. In spite of its compactness, it is equipped w...
-11- mpc-816xc compact controller 8 outputs, 16 inputs [characteristics] this is a single mpc-816 stored in a case. Please use it when you use one cpu board installed directly in an apparatus. Refer to mpc-816k for the specification details. [accessories] (1) housing (ps-d4c50) jae *1 (2) power conn...
-12- mpg-301 one-axis pulse generation encoder counter board 1m pps 1-axis pulse output 1m pps encoder input, etc. [characteristics] mpg-301 is a pulse-generation multifunction board which is loaded with one kyopal x3202 and let mpc816 directly operate the ic register. It is capable of flexible cont...
-13- rack-set (a) 4-board construction rack set [characteristics] this is a rack set for mpc-816. It deals with a 4-board construction system. Mpc-set (a) is a rack set with mpc-816 and mif-816 added. [construction] rack (a) main body, bus board a, rack flange. [accessories] screws (m3 * 4) for asse...
-14- mpc peripherals ~ common for mpc-68k and mpc-816 ~ cable dos/v 98 [characteristics] this is a cable of our company brand to connect mpc and a personal computer. Although the basic cable is for dos/v, because a 25-pin conversion connector is included, it can also be used for pc98. Ftm (ftm98 / f...
-15- how to deal with noise control involving position determination control internally deals with signals of several msec. Because this signal is at a similar level to a noise signal, no matter what control device is used, reliability and accuracy cannot be obtained without any noise countermeasure...
-16- ftmw (ftm – work bench) ftmw is a programming tool for mpc-816 and mpc-68k, equipped with all the functions necessary for program development and maintenance. The dedicated editor is a specialized editor for mpc programming, equipped with reserved word management, simple help with command forma...
-17- request to our customers concerning the application range of our products all of our products use general-use components. Therefore, please refrain from using them for fields requiring high reliability and for the purposes dealing with human life. Product warranty period we maintain or exchange...
