Accell ProPower 100 User Manual
ProPower™ 100 Home Theater Surge Protector
Thank you for purchasing the ProPower™ 100 surge protector. This product provides protection from power
surges and conditions the power using ProPower™ technology, for a clearer picture and superb sound quality.
READ ME FIRST – SAFETY INFORMATION
WARNING – Grounding and Polarization: This product features a three-prong grounded AC plug designed
for use with a grounded three-prong power outlet. If the plug does not fit into the power outlet, do not force. Do
not alter the plug or use a 2-prong plug adapter. Contact a qualified electrician for information on installing a
proper polarized and grounded outlet.
Rooftop accessories such as antenna or satellite dishes that will be connected to the ProPower™100 must be
properly ground due to their exposure to lightning and power lines.
WARNING – Liquids: Do not use this product outdoors, near or around water (i.e., aquariums, bathrooms,
kitchens, laundry room) or in conditions that may expose it to any liquid. Do not operate your ProPower™ 100 if
liquid is spilled on or is present near it.
WARNING – Product Safety: Do not exposure this product to sunlight or place it near a heater or in an
enclosed area prone to high heat. The ProPower™ 100 is not user serviceable. Should the unit become damaged
or non-operational, please unplug the unit and consult the Warranty section of this manual for details.
IMPORTANT SETUP NOTE – To properly protect your equipment from surges all wires leading into the
equipment from other components and devices, including coaxial, phone, A/V interconnect and AC, the other
components and devices must be correctly connected to the ProPower 100.See Warranty below.
LIMITED WARRANTY NOTE - The U.S. $100,000 Limited Connection Equipment warranty becomes invalid
should any wire including phone and AC, leading into the equipment is not correctly connected to the ProPower
100.
ProPower™ 100 Setup:
1. The extra long 8’ power cord with right-angled plug fits into a grounded three-prong power outlet. Please
do not run the cable in traffic areas where cord can become damaged or pose a tripping hazard.
2. The ProPower 100 includes 2 transformer spaced, surge protected power outlets.
3. Eight surge protected power outlets, each labeled for easy plug identification. Although the power outlets
are labeled with specific device names this is for reference only. Each outlet can be used with any device.
4. Illuminated On/Off power switch. The power switch also acts as a Reset for the circuit breaker. The circuit
breaker may be triggered due to power overloading, high temperature or a short circuit, shutting off power
to the ProPower 100. To reset, toggle the power switch to the Reset position then to the On position.
5. A lighted green Grounded LED indicates that the wall outlet the ProPower 100 is connected to is actively
grounded.
6. A lighted red Protected LED indicates that the ProPower 100 surge protection is active.
7. Connect the incoming phone line (RJ11) from the wall plate to the port labeled In. Connect the port labeled
Out to the phone, digital video recorder (DVR), network or other device.
8. Connect a properly grounded incoming coaxial cable, such as cable, satellite or modem to the port labeled
In. Connect the corresponding port labeled Out to the TV cable box, satellite receiver or network. Although
the coaxial ports are labeled with specific device names, each in/out port pair can be used with any device.
Assistance: If you have questions regarding the Accell ProPower 100 or its product warranty, please check out
our Web site at: www.accellcables.com. Customer service can be reached by email at support@accellcables.com
or by phone at 510-438-9288 (M-F 9am-5pm PST).