Accent 800 Getting Started - Acknowledgements

Other manuals for 800: Hardware Manual, Hardware Manual
Manual is about: For Accent 800 Models with Serial Numbers 3000AC8 and Higher

Summary of 800

  • Page 1

    17419v1.5 getting started applies to accent 800/800-d models with serial numbers 3000ac8 and higher.

  • Page 2: Acknowledgements

    Accent 800/800-d getting started 2 acknowledgements copyright/trademark information © 2015-2017 prentke romich company. All rights reserved. Under copyright laws this document may not be copied, in whole or in part, without the written consent of the prentke romich company. Accent, essence, nueye, n...

  • Page 3

    Accent 800/800-d getting started 3 end user licensing agreement you have acquired a prc device which includes software licensed by prc from microsoft licensing inc. Or its affiliates ("ms"). Those installed software products of ms origin, as well as associated media, printed materials and "online" o...

  • Page 4: Contents

    Accent 800/800-d getting started 4 contents a quick look at device features ................................................................................................................................... 5 opening the wire stand ......................................................................

  • Page 5

    Accent 800/800-d getting started 5 a quick look at device features front view back view * if you use a switch or switches for access to your device, plug them into switch jacks a and b. To use a joystick, you will need a y-adapter. If you have a joystick plugged in and it does not respond normally, ...

  • Page 6

    Accent 800/800-d getting started 6 left side view 1 the usb 3.0 port supports usb 3.0, usb 2.0, and usb 1.0 accessories. 2 functional only with purchase of the integrated feature pack. The external access mini port allows you to connect to an external device if you have the integrated feature pack. ...

  • Page 7: Opening The Wire Stand

    Accent 800/800-d getting started 7 opening the wire stand the stand in the latched position provides a slight angle for viewing the screen when the device is sitting on a flat surface. When the user needs an additional angle, extend the legs of the stand away from the back of the device by doing the...

  • Page 8: Removing The Wire Stand

    Accent 800/800-d getting started 8 removing the wire stand if you do not want to use the stand, you can remove it from the back of the device. You can reattach it at any time. 1. Place the device face-down on a flat surface. 2. Remove the screws from the holders at the top of each of the stand’s leg...

  • Page 9

    Accent 800/800-d getting started 9 removing or reattaching the handle to remove the handle from the device 1. Remove the two screws that hold it in place. 2. Pull the handle away from the device. 3. If you are not going to mount a nupoint module, it is important to attach the port cover to protect t...

  • Page 10: Attaching The Port Cover

    Accent 800/800-d getting started 10 attaching the port cover if you removed the handle and are not going to mount a nupoint module, it is important to attach the port cover to protect the mini usb connector on the top of the device. 1. Line up the holes in the cover with the holes on the back of the...

  • Page 11: Removing The Device Frame

    Accent 800/800-d getting started 11 removing the device frame your device came with a frame mounted on it. If you need to remove the frame, follow these instructions. 1. Remove the four screws that secure the frame to the device—two on the top and one on each side. Note: store these screws in a safe...

  • Page 12: Turning On The Device

    Accent 800/800-d getting started 12 turning on the device 1. Press and hold the power button located on the top edge of the device. The green power led will illuminate. The led will remain illuminated while the device is on and while the device is in sleep mode. 2. Wait for the nuvoice® software to ...

  • Page 13: Charging The Battery

    Accent 800/800-d getting started 13 charging the battery important! Always use the battery charger that came with your device. Any other charger may damage the battery. How long the battery lasts depends on how you use your device. You may be able to get up to 18 hours of use from one charge, or you...

  • Page 14: Cleaning And Disinfecting

    Accent 800/800-d getting started 14 cleaning and disinfecting if your device will only be used by one person, routine cleaning and disinfecting should be sufficient. If, however, more than one person will be using the device, take additional measures to clean and disinfect the device after it has be...

  • Page 15

    Accent 800/800-d getting started 15 disinfecting a device and accessories for multiple users note: this section applies only when more than one person will be using the same device. In that situation, it’s vital to effectively disinfect the device and accessories that have been used by one person be...

  • Page 16

    Accent 800/800-d getting started 16 device configurations from prc your prc device shipped with one of four configurations: the unity® language system, the unidad® bilingual system, the essence® language system, or the wordpower™ language system. Below are brief descriptions of each configuration as...

  • Page 17

    Accent 800/800-d getting started 17 corescanner language system the corescanner language system is a progressive vocabulary program specifically designed for individuals with physical disabilities, who best access a communication device through the use of a switch. The corescanner design is based on...

  • Page 18: Accessing The Toolbox

    Accent 800/800-d getting started 18 the wordpower device configuration the wordpower language system is uniquely designed by inman innovations. The wordpower configuration has two versions, wordpower and picture wordpower. The wordpower vocabularies are word-based and give individuals access to a ke...

  • Page 19: Changing The Voice

    Accent 800/800-d getting started 19 5. On the keyboard page, type replace and select ok. 6. In the user area menu, select switch user area. Then select the new vocabulary. 7. Select the ok button twice to return to the vocabulary screen. Changing the voice 1. Select the tools key and then select the...

  • Page 20: Accessing The Setup Key

    Accent 800/800-d getting started 20 changing the access method to change the method you use to control your device: 1. Select the tools key and then select the toolbox key. 2. Select access method menu and then select choose different access method. 3. Select touch, 1 switch, 2 switch, headpointing/...

  • Page 21

    Accent 800/800-d getting started 21 disabling and enabling the toolbox when you disable the toolbox, you can still use your vocabulary to speak, but the tools key will not take you from core or your home page to the toolbox without entering a password. To disable the toolbox 1. Select the tools key ...

  • Page 22

    Accent 800/800-d getting started 22 updating the nuvoice software via a wi-fi connection recommendation: install nuvoice updates as soon as they are available. To perform this type of update, your device must be connected to a wi-fi network. Note: if you have a dedicated device, a wi-fi connection w...