Access Dinghy Sailing 303 Single Seater Owner's Manual - Declaration of Conformity
4
Model:
Hull Identification No:
Design Category D: “Sheltered Waters”
Craft designed for voyages on small lakes, rivers or
canals where conditions up to and including wind
force 4 and significant wave heights up to and
including 0.5mtr may be experienced.
Built by:
Access Dinghy Sailing Systems Pty Ltd
2/7 Bungaleen Court
Dandenong, Victoria 3175
Australia
Ph: 61 3 9768 3101 Fax: 61 3 9768 3103
Email: info@accessdinghy.org
Using the moulds, parts,
and measurements
authenticated by
Access Dinghy Sailing Systems Pty Ltd
Sail No:
REF
ESSENTIAL REQUIREMENTS
STANDARD USED
2
General Requirements
2.1
Hull Identification No (HIN)
ISO10087.95E
(attached to craft)
2.2
Builders Plate
ISO14945:2004
(attached to craft)
2.4
Owner’s Manual
ISO10240:1996
(attached)
3
Integrity and Structural Requirements
3.1
Structure
ISO12215-1:2000
(as per Access Dinghy Sailing Sys-
tems Production Manual)
3.2
Stability and freeboard
ISO12217-3:2002
3.3
Buoyancy and flotation
ISO12217-3:2002
3.4
Manufacturers recommended load
ISO14946:2001
(as shown on Builders Plate)
3.5
Towing
ISO15084:2003
5
Steering Systems
5.4.1
General Steering System
ISO8847:2004
(manual joystick)
Chris Mitchell, Managing Director
Access Dinghy Sailing Systems Pty Ltd
Signed: .....................................................................
Date:
..................................................
Declaration of Conformity
Recreational Craft Directive 94/25/EC
Capacity:
Maximum number of people: 2.
Maximum weight of people 160 kg.
Maximum weight of additional load 20 kg.