Access HD DTA1010 Quick Start Manual
of
2
Rev. June 5, 2008
Access HD® is exclusively distributed by GXi International, LLC
Page 1 of 2
CONNECTING YOUR DIGITAL CONVERTER BOX
Connect the antenna to the ATSC (RF IN) jack on the back of your converter box.
Using the supplied RF Coax Cable, connect the NTSC (RF OUT) jack on the
back of your converter box to the ANTENNA IN jack on the back of your TV.
(NOTE: You may also connect converter box to TV with optional RCA Audio/Video Cable)
Connect the power cord into a power outlet or surge protector.
Turn ON the converter box and TV.
Set your TV to Channel 3 (or 4) to match the CH3/CH4 switch on the back of
the converter box.
Quick Start Guide
DTA1010
2
3
1
2
3
4
5
1
5