Accessory Power BG-7D Instruction Manual - Removing Bg-7D
Turn over the (b) AA Battery Magazine so that the inserted batteries are facing
downward. Slide the (b) AA Battery Magazine into the (3) Battery Chamber until
the (8) Battery Release Levers lock into place.
Firmly close the (10) Battery-Chamber Cover. Be sure to close the (10) Battery
Chamber Cover until it clicks into place. Turn your Canon dSLR Camera’s power
ON, and check the battery level in the control panel or viewfinder. If the LP-E6
batteries are not 100% full, individual battery levels can be verified with the
battery information option in your camera setup menu.
Removing BG-7D
To remove the BG-7D, turn your Canon dSLR Camera’s power OFF, and set the
(17) Operation Switch to the “OFF” position and then follow the above steps in
the reverse order. Be sure to reconnect the battery-compartment cover to your
Canon dSLR Camera.
Operating Instructions (cont’d)