Accessory Power Go Grppve BlueBar Instruction Manual - Playing Music
Pairing your mobile Bluetooth device to the BlueBar
Pairing instructions may diff er depending on the device you are using. Please
refer to your device’s user manual for further information.
1- Make sure that your mobile device is within at least 3 feet of the BlueBar when
trying to pair.
2- Start with the BlueBar turned OFF. Press and hold the (2) Power/Play button
until the (1) Power LED indicator fl ashes alternating red and blue. The BlueBar is
now in PAIRING MODE.
3- Access the Bluetooth settings in your mobile device and select SEARCH/SCAN
FOR DEVICES. Your mobile device will begin to search for a Bluetooth signal.
4- You will see the name BLUEBAR appear in the device list. Select it to pair, and
if a password or PIN is needed enter the numbers “0000”. ***You may have to then
select BlueBar and press “CONNECT”.
5- After a successful connection has been made, you will hear a short tone and
the (1) Power LED Indicator will begin to fl ash blue.
Playing music
1- Make sure that your Bluetooth A2DP enabled device is paired with the BlueBar.
2- Simply begin playing music on your device and you should hear the music
play through the AudiOHMs. Adjust volume, using the (3) Volume +/- buttons.
3- You can control music playback via the BlueBar with any AVRCP (audio/video
remote control profi le) enabled device. To play or pause briefl y press the
(2) Power/Play button. You can control track playback with the (4) Forward/Back
buttons.
Hands-free calls
The BlueBar is equipped with a (7) Microphone for hands-free calling. When
receiving a call you will hear a tone through your headphones.
1- Answer a call- Press the (2) Power/Play button
2- End a call- Press the (2) Power/Play button
3- Reject an incoming call- Press and hold the (2) Power/Play button for 2 seconds
4- Redial last number called- Press and hold the (2) Power/Play button 2 seconds
Operating Instructions (continued):