Accessory Power GoCharge Instruction Manual - Troubleshooting
of
8
None of the bars on the (1) Battery meter are glowing RED when I press the
(2) Battery meter button. Also, the (7) LED fl ashlight does not light when
pressing the (8) LED light button.
- The GoCharge Power Pack’s backup battery has no power and must
be recharged.
The GoCharge Power Pack is connected to the (e) USB-AC adapter and
plugged into an AC wall outlet but won’t charge my USB device.
- AC power does not support dual USB charging. While charging the
GoCharge PowerPack’s backup battery via AC wall outlet, you must let it
absorb power for at least 15 minutes. Afterwards, go ahead and connect the
device and slide the (3) Power switch to ON. Your mobile device will begin to
draw power.