Accessory Power Gogroove SonaWAVE Instruction Manual - Power On and Play Music
Playing Music from a Laptop Computer
Connect the GOgroove SonaWAVE to your Laptop Computer
First, connect the small end of the (3) USB power cable to the USB
port (fi g. 4) on the back of the GOgroove SonaWAVE. Connect the
large end of the (2) USB power cable into your computer’s USB port.
The GOgroove SonaWAVE will receive an audio signal and power
through the (2) USB power cable (fi g 4.). There is no need to connect
the (4) 3.5mm audio cable for laptop confi guration.
Power ON and Play Music
Press the Power button (fi g. 2-1) to turn on the GOgroove SonaWAVE.
You will see the Volume and Power buttons (fi g. 2-1) glow blue to indi-
cate power fl ow. You are now ready to play music! You can adjust the
volume with your computer and with the Volume
buttons (fi g. 2-1) on the GOgroove SonaWAVE.
NOTE: If your laptop computer does not have a free USB port,
you can connect the GOgroove SonaWAVE via the 3.5mm audio
cable. You will have to provide power to the GOgroove SonaWAVE
through either AC or AAA power.
Playing Music from a Laptop Computer (Mac and PC)
fig. 4
AUX USB
USB power cable