Accessory Power Solar Power Pak Instruction Manual
SOLAR
POWER
PAK
INSTRUCTION MANUAL
TM
FREE PRODUCT REGISTRATION
Protect your investment by registering your
product now and receive full warranty
coverage and access to special offers.
www.AccessoryPower.com/warranty
Specifications
1. Solar panel specifications: 5.0V/60mAh (max)
polycrystalline silicon panel.
2. High-capacity built-in polymer battery rated
at 1,400mAh. Rechargeable up to 1,000 times.
3. Output voltage: 5.5v.
4. Output current: 350-800mAh.
5. The Solar Power Pak has advanced ICC
Protection which provides overcharging and
short-circuit protection. This will provide many
years of safe efficient operation.
Warnings
1. To avoid damage charge the Solar Power Pak
only with cables and plugs supplied.
2. Do not drop, disassemble or attempt to repair
the Solar Power Pak.
3. Avoid exposure to water or high humidity.
4. Keep out of reach of children.
5. Don't use in the presence of flammable gas.
6. You can use the battery pack from 32°F to104°F.
For best results use between 50°F to 86°F.
7. Operating time will be shorter than usual at
low
temperature.
8. If the Solar Power Pak starts to give you much
less operating time than usual (at normal
temperatures) it has reached the end of its life
and must be replaced.
ACCESSORY POWER
WESTLAKE VILLAGE, CA
WWW.ACCESSORYPOWER.COM
MADE IN CHINA
(C) 2009 ACCESSORY POWER. ALL TRADEMARKS AND BRAND
NAMES ARE THE PROPERTY OF THEIR OWNERS. DO NOT OPEN
OR DISPOSE OF IN FIRE OR SHORT CIRCUIT. BATTERY MAY
EXPLODE OR CAUSE INJURY.
Please Always Recycle