Accessory Power Trans4M Instruction Manual - page 3
(7) AC Flip‐Down Plug
Toubleshooting
Problem: My USB device is not charging.
Possible solutions:
1‐ Please make sure that Trans4m is properly connected to the power source – AC, DC, AA or 9V.
With an AC or DC outlet, make sure there is power supplied to that outlet. For AA and 9V, please
make sure that you are using high quality batteries (Accessory Power, Sony, Duracell, Energizer
etc.). Please ensure that the battery contacts are matched correctly.
2‐ Make sure there is a good connection between the USB cable, Trans4m, and your mobile device.
3‐ Please make sure that you see the LED indicator illuminate. This will indicate power flowing to
the Trans4m.
Cautions
‐
Keep in a safe place free from dust, liquid and extreme temperatures
‐
Only use this device with the recommended power sources
‐
Keep out of reach of small children
‐
When not in use, please disconnect batteries or power sources
Product Specification
Input Voltage: AC Plug 100‐240v, DC 12‐24V, 9V battery, (2)AA batteries