Accessory Workshop tyPad User Manual - page 3
Storage
To prolong battery life, always switch the power on the keyboard to OFF after
each use.
Attention:
1. Keep away from sharp objects.
2. Do not put objects on keyboard.
3. Do not force or distort keyboard.
4. Avoid contact with liquid or food.
5. Do not drop keyboard.
6. Keys may be wiped gently with a damp cloth only. Do not soak the keys in
water. Only clean the keyboard when it is powered OFF.
TIP: When your keyboard device is inactive, it will enter standby mode. The
keyboard lights will turn off. Your keyboard is not broken or powered off. Press
any key (do NOT press connect button) and wait three seconds and the keyboard
will revert to its normal state.
December 2010
FCC Radiation Exposure Statement:
1. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
2. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Disclaimer
Accessory Workshop is not responsible for any consequential or incidental damage
resulting from the sale or use of any merchandise bought from us, nor is it
responsible for any damage, theft, or loss incurred to your iPad when used in
conjunction with this product. Please refer to the enclosed warranty card for
complete details.
For questions and technical support please call 1.888.691.3047.
iPad is a trademark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Accessory Workshop is under license.
IMPORTANT NOTE:
11
12
10
9
Disposal Guidelines
The built-in keyboard for your tyPad contains a Lithium Ion battery that may
require special disposal. Should you decide to discard your tyPad after use, please
remove the rechargeable Lithium Ion battery and discard it in accordance with
your state’s battery disposal guidelines. Contact your local or county waste
department or recycling facility to obtain the disposal requirements for your area.
Accessory Workshop, LLC. is a design and manufacturing firm
specializing in cutting edge consumer electronics and accessories. We
create and develop innovative products meant to enhance your
computer and gaming experience. Our mission is to make your life a
little easier, one product at a time.
Simple as that.™
USER MANUAL
V.1012B
Dec 2010
Pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful
interference to radio or television reception. This can be determined by turning the
equipment off and on. The user is encouraged to try to correct the interference by
one of the following measures:
This equipment has been tested and found to comply with the limits for a class B
digital device.
● Reorient or relocate the receiving antenna
● Increase the separation between the equipment and receiver
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions; (1) This device many not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any change or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
Federal Communication Commission Interference Statement
FCC ID: YX7-TY-101