Acclaim Lighting 6267020 Operation & Maintenance Instructions Manual - Operation

7

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

CONNECT THE CHARGER TO THE BATTERY

CONNECTING A NEGATIVE EARTHED BATTERY

1. Make sure that the black clamp is not touching the battery or the fuel line.

2. Connect the positive (+) red clamp to the positive (+) battery post then 

connect the negative (-) black clamp to the negative (-) battery post or 

vehicle chassis.

CONNECTING A POSITIVE EARTHED BATTERY

1. Make sure that the red clamp on the clamp lead is not touching the 

battery or the fuel line.

2. Connect the negative (-) black clamp to the negative (-) battery post then 

connect the positive (+) red clamp to the positive (+) battery post or 

vehicle chassis.

BATTERY NOT IN A VEHICLE

1. Connect the (+) red clamp to the positive (+) battery post then connect 

the (-) black clamp to the negative (-) battery post.

PERMANENT CONNECTION TO VEHICLE USING EYELET LEAD

1. Connect the eyelet on the red (+) wire to the positive (+) battery terminal, 

then connect the eyelet on the black (-) wire to the negative (-) battery 

terminal.

Cigar lighter lead - when you want to charge 

the battery though the vehicle accessory 

(cigar lighter) socket.

NOTE: Not all vehicles allow charging this way, 

and doing so can damage the vehicles 

electronic systems, see the vehicle 

handbook for details on recommended 

methods of charging the battery.

Lead (C) is for semi permanent connection to 

the battery via eyelets.

•Make sure that the cable does not get 

tangled in any moving parts and use the 

rubber cap provided to prevent short circuits.