1. DL manuals
  2. ACCO Brands
  3. Paper Shredder
  4. 1150 S2
  5. Illustrated Parts Lists And Service Instructions

ACCO Brands 1150 S2 Illustrated Parts Lists And Service Instructions

Summary of 1150 S2

  • Page 1

    Deskside and office 230v machines illustrated parts lists and service instructions compiled by david bird issue no 7 approved by paul aries (technical manager) date rexel business machines, droitwich, worcestershire, wr9 9ap, england telephone +44 (0) 1905 771555 fax +44 (0) 1905 823374.

  • Page 2: Table of Contents

    Deskside and office 230vissue7 1 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models table of contents illustrated parts manual deskside and office series 7 shredders – 230 volts contents page 1 – 2 preface page 3 illustrations and parts lists with recommended spa...

  • Page 3

    Deskside and office 230vissue7 2 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models service instructions pages 29 – 64 operational test procedures page 29 top cover pages 30 - 32 cutting heads page 33 printed circuit boards page 34 optical sensors page 35 electri...

  • Page 4: Preface

    Deskside and office 230vissue7 3 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models preface this manual provides the instructions for the replacement of all the components that may become worn or damaged. Details of replacement parts and ordering information are ...

  • Page 5

    Deskside and office 230vissue7 4 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s2 cutting head no description part qty comments 1 1:1 gear 9709 2 2 ½” circlip tru95 2 3 gear 56 tooth a44259 1 4 circlip, 10mm tru66 1 5 washer, m10 flat pln33 1 6 com...

  • Page 6

    Eskside and office 230vissue7 5 01/02/02 sue 6 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s2 cutting head.

  • Page 7

    Deskside and office 230vissue7 6 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s3 and s4 cutting head no description part s3 s4 comments 1 side frame (motor) d53014 1 1 side frame (motor) d53058 1 2 1:1 gear d53028 2 2 3 circlip, 17mm tru88 1 1 4 l...

  • Page 8

    Deskside and office 230vissue7 7 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models no description part s3 s4 comments 36 nut protection cap sl18-325 2 2 37 infeed chute (front) d53035 1 1 38 not used 39 stripper cross cut d53010 144 39 stripper cross cut d53086 ...

  • Page 9

    Eskside and office 230vissue7 8 01/02/02 sue 6 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s3 and s4 cutting head.

  • Page 10

    Deskside and office 230vissue7 9 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s5 cutting head no description part qty comments 1 side frame (motor) d53141 1 2 1:1 gear d53530 2 3 circlip, 17mm tru88 1 4 lost motion collar d53790 1 5 spur gear asse...

  • Page 11

    Eskside and office 230vissue7 10 01/02/02 sue 6 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s5 cutting head.

  • Page 12

    Deskside and office 230vissue7 11 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1150 s2 and 1250 s2 cutting head no description part 1150 s2 1250 s2 comments 1 side frame (motor) d53567 1 1 side frame (motor) d53571 1 2 pin, 20mm long, 5mm dia peg77 2 ...

  • Page 13

    Deskside and office 230vissue7 12 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models no description part 1150 s2 1250 s2 comments 40 nut cover sl18-325 2 2 41 cutter shaft – driven d53561 1 1 42 tie bar d53573 2 2 43 key, 5x5x16 key32 2 2 44 stripper plate – fron...

  • Page 14

    Eskside and office 230vissue7 13 01/02/02 sue 6 illustrated parts manuals series 7 shredders – 230v deskside and office models 1150 s2-1250 s2 cutting head.

  • Page 15

    Deskside and office 230vissue7 14 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1150 s3, 1250 s3 and s4 cutting head no description part 1150 s3 1250 s3 1250 s4 comments 1 side frame (motor) d53685 1 1 side frame (motor) d53686 1 1 2 pin, 20mm long, 5m...

  • Page 16

    Deskside and office 230vissue7 15 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models no description part 1150 s3 1250 s3 1250 s4 comments 36 snap bush sl18-369 2 2 2 37 pop rivet rts68 4 4 4 38 nut m6 nm5 8 8 8 39 washer, plain pln4 8 8 8 40 vibration isolator sl...

  • Page 17

    Eskside and office 230vissue7 16 01/02/02 sue 6 illustrated parts manuals series 7 shredders – 230v deskside and office models 1150 s3, 1250 s3 & s4 cutting head.

  • Page 18

    Deskside and office 230vissue7 17 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1250 s5 cutting head no description part qty comments 1 side frame (motor) d53768 1 2 oilite bush bsh60 2 3 spigot shaft d53652 1 4 grooved pin pm2 1 5 circlip, 17mm id tru...

  • Page 19

    Deskside and office 230vissue7 18 01/02/02 illustrated parts manuals series 7 shredders – 230v deskside and office models no description part qty comments 43 washer plain pln4 8 44 vibration isolator sl18-305 4 45 nut cover sl18-325 2 46 stripper d53723 169 46 stripper d53785 169 47 1/32” spacer (he...

  • Page 20

    Eskside and office 230vissue7 19 01/02/02 sue 6 illustrated parts manuals series 7 shredders – 230v deskside and office models 1250 s5 cutting head.

  • Page 21

    Deskside and office 230v 20 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 cabinet no description part s2 s3 s4 s5 comments 1 door assembly a53131 1 1 1 1 2 door handle d54140 1 1 1 1 5 cabinet assembly a53133 1 5 cabinet assembly a53129 1 1 1 6 scr...

  • Page 22

    Deskside and office 230v 21 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 cabinet.

  • Page 23

    Deskside and office 230v 22 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models models 1150 cabinet no description part s2 s3 comments 1 door assembly a53793 1 1 2 door handle d54140 1 1 5 cabinet assembly a53798 1 1 6 screw m4 x 12 csk scm81 3 3 7 top cover assem...

  • Page 24

    Deskside and office 230v 23 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1150 cabinet.

  • Page 25

    Deskside and office 230v 24 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models models 1250 cabinet no description part s2 s3 s4 s5 comments 1 door assembly a53793 1 1 1 1 door assembly a53792 1 2 door handle d54140 1 1 1 1 5 cabinet assembly a53798 1 1 1 5 cabine...

  • Page 26

    Deskside and office 230v 25 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models 1250 cabinet.

  • Page 27

    Deskside and office 230v 26 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models models 250 electrics description part s2 s3 s4 s5 comment capacitor 12 µfd sl6-41 1 for motor start capacitor 15 µfd sl6-53 1 1 for motor start capacitor 10 µfd sl6-40 1 for motor star...

  • Page 28

    Deskside and office 230v 27 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models models 1150 electrics description part s2 s3 comments capacitor 12 µfd sl6-41 1 1 for motor start cord set europe sl4-90 1 1 cord set uk sl4-88 1 1 fuse 10a sl15-22 1 1 for inlet socke...

  • Page 29

    Deskside and office 230v 28 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models models 1250 electrics description part s2 s3 s4 s5 comments capacitor 30 µfd sl6-57 1 1 1 1 for motor start (plastic cased) capacitor 30 µfd sl6-60 1 1 1 1 for motor start (metal cased...

  • Page 30: Operational Test Procedures

    Deskside and office 230v 29 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models operational test procedures item 250__ 115__ 125__ auto start sensor assembly operates when using single sheet of paper max. Number of sheets 2 n/a 21 27 3 14 18 17 5 5 n/a 8 led opera...

  • Page 31: Important Note

    Deskside and office 230v 30 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models important note always:- disconnect from mains supply before work starts discharge mains capacitor by shorting terminals secure components with new grip rings replace wire straps as req...

  • Page 32

    Deskside and office 230v 31 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models view of 250/1150 series – pcb in top cover, plug for auto start sensors (not on model 250 s2) (a), terminal block plug in connector (b), plug for limit switches (c). 1. Remove cover as...

  • Page 33

    Deskside and office 230v 32 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models view of 1250 series – terminal block plug in connector (b) and plugs to limit switches (c) and for auto start sensors (a). Replacement of top cover (all models) 1. Refit all push fit c...

  • Page 34

    Deskside and office 230v 33 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 2 – cutting head (all models) removal 1. Remove top cover away from machine, as described in section 1. 2. Disconnect two wires from the capacitor (these serve the motor). 3. D...

  • Page 35: Models)

    Deskside and office 230v 34 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 3 – printed circuit board in top cover (all models) removal 1. Remove top cover away from machine as described in section 1. 2. Remove seven pozi-drive screws holding pcb to to...

  • Page 36

    Deskside and office 230v 35 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 4 – auto start sensors (all models) removal 1. Remove top cover as for visual inspection only, (models 1250) see section 1. 2. Unplug (models 250 and 1150) the auto start conne...

  • Page 37: Electric

    Deskside and office 230v 36 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 5 – electric motors model 250-s2 removal 1. Remove top cover and cutting head as described in sections 1 & 2 2. Remove motor wires from capacitor and pcb and detach earth wire ...

  • Page 38

    Deskside and office 230v 37 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models 7. Remove top (rear) tie bar, by unscrewing on fixing bolt at ‘bearing end’, and sliding it out of the ‘motor’ side plate. 8. Unfasten four motor bolts (note – two, under the compound ...

  • Page 39: Section 6 – Gears

    Deskside and office 230v 38 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 6 – gears model 250-s2 removal 1. Remove top cover and cutting head as described in sections 1 & 2. 2. Remove grip ring and slide away the large gear. 3. Remove circlip and was...

  • Page 40

    Deskside and office 230v 39 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models timing of gears – all cross cut machines before tackling the 1:1 gears, mark which teeth mesh so that on re-assembly, their exact alignment can be reproduced – this is essential for ma...

  • Page 41

    Deskside and office 230v 40 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 7 – tie bars (stripper support bars), cutting shafts, stripper plates, (feed chutes) paper guides. Models 250 s2 removal 1. Remove top cover, cutting head, auto start sensors, ...

  • Page 42

    Deskside and office 230v 41 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models 9. Replace gears 10. Fit cutting head into cabinet. 11. Replace top cover. 12. Test operation. Models 250-s3, s4, 1150-s3, 1250-s3, s4 removal 1. Remove top cover, cutting head, auto s...

  • Page 43

    Deskside and office 230v 42 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models replacement of damaged strippers:- 1. Slide out stripper support bars to the extent necessary. 2. Lift out damage strippers. 3. Fit new plates, (two per groove s3 models, one per groov...

  • Page 44

    Deskside and office 230v 43 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models 2. Firmly holding the cutters into each other, rotate the stripper support bar sets (and therefore the strippers) upwards towards each other to bring shafts and bars into the correct a...

  • Page 45

    Deskside and office 230v 44 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models 15. Install gears with gearbox cover (ensuring correct mesh of 1:1 gears). 16. Replace cutting head into cabinet. 17. Re-install wiring. 18. Fit top cover. 19. Test operation. Models 1...

  • Page 46

    Deskside and office 230v 45 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models 5. Holding the sub-assembly together, locate the ‘motor end’ side plate on to the stripper plate/safety flap tabs and ends of the cuttings shafts. Tap gently into position. Before clos...

  • Page 47

    Deskside and office 230v 46 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models re-assembly:- 1. Replace damaged parts and rebuilt the stack 2. Refit collar and tighten lock-nuts (no need for slacking back). 3. Replace bin full flap, and safety flap (1250 s5) relo...

  • Page 48

    Deskside and office 230v 47 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models section 8 lcd operation (1250 models only) a) flow chart to illustrate safety features. *** warning *** the *** safety safety reset covers open! Barrier barrier press down has lifted u...

  • Page 49

    Deskside and office 230v 48 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models b. Flow chart to illustrate operator controls plug into *** stand-by *** insert *** stand-by *** no mains (model no.) paper (model no.) operation reverse forward press press reverse fo...

  • Page 50

    Deskside and office 230v 49 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models c) flow chart to illustrate other features 5 second message: after 5 seconds: *** oil required *** prompt appears display reverts to at next request for use action selected, *** oil cu...

  • Page 51

    Skside and office 230v 50 26/05/99 ue no 6 illustrated parts manuals series 7 shredders – 230v deskside and office models.

  • Page 52

    Skside and office 230v 51 26/05/99 ue no 6 illustrated parts manuals series 7 shredders – 230v deskside and office models.

  • Page 53

    Skside and office 230v 52 26/05/99 ue no 6 illustrated parts manuals series 7 shredders – 230v deskside and office models.

  • Page 54

    Skside and office 230v 53 26/05/99 ue no 6 illustrated parts manuals series 7 shredders – 230v deskside and office models.

  • Page 55

    Skside and office 230v 54 26/05/99 ue no 6 illustrated parts manuals series 7 shredders – 230v deskside and office models.

  • Page 56: Model 250 S2

    Deskside and office 230v 55 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s2 power supply 220-240v 50hz height 695 mm width 400 mm depth 280 mm machine weight 26 kg entry width 240 mm shred size nominal 3.8 mm straight cutting capacity 14 sheets (a...

  • Page 57: Model 250 S3

    Deskside and office 230v 56 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s3 power supply 220-240v 50hz height 695 mm width 400 mm depth 280 mm machine weight 35.1 kg entry width 240 mm shred size nominal 3.8 x 50mm cutting capacity 11 sheets (a4 7...

  • Page 58: Model 250 S4

    Deskside and office 230v 57 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s4 power supply 220-240v 50hz height 695 mm width 400 mm depth 280 mm machine weight 39.1 kg entry width 240 mm shred size nominal 1.9 x 15mm cutting capacity 11 sheets (a4 7...

  • Page 59: Model 250 S5

    Deskside and office 230v 58 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 250 s5 power supply 220-240v 50hz height 695 mm width 400 mm depth 280 mm machine weight 39.3 kg entry width 240 mm shred size nominal 0.8 x 11mm cutting capacity 8 sheets (a4 70...

  • Page 60: Model 1150 S2

    Deskside and office 230v 59 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1150 s2 power supply 220-240v 50hz height 875mm from a419314 width 490 mm depth 380 mm machine weight 40.3 kg entry width 260 mm shred size nominal 3.8mm straight cutting capacit...

  • Page 61: Model 1150 S3

    Deskside and office 230v 60 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1150 s3 power supply 220-240v 50hz height 875 mm width 490 mm depth 380 mm machine weight 42.6 kg entry width 260 mm shred size nominal 3.8 x 50mm cutting capacity 11 sheets (a4 ...

  • Page 62: Model 1250 S2

    Deskside and office 230v 61 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1250 s2 power supply 220-240v 50hz height 875 mm width 490 mm depth 380 mm machine weight 43.7 kg entry width 260 mm shred size nominal 3.8mm straight cutting capacity 25 sheets ...

  • Page 63: Model 1250 S3

    Deskside and office 230v 62 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1250 s3 power supply 220-240v 50hz height 875 mm width 490 mm depth 380 mm machine weight 44.8kg entry width 260 mm shred size nominal 3.8 x 50mm cutting capacity 18 sheets (a4 7...

  • Page 64: Model 1250 S4

    Deskside and office 230v 63 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1250 s4 power supply 220-240v 50hz height 875 mm width 490 mm depth 380 mm machine weight 45 kg entry width 260 mm shred size nominal 1.9 x 15mm cutting capacity 11 sheets (a4 70...

  • Page 65: Model 1250 S5

    Deskside and office 230v 64 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models model 1250 s5 power supply 220-240v 50hz height 875 mm width 490 mm depth 380 mm machine weight 47.2 kg entry width 260 mm shred size nominal 0.8 x 11mm cutting capacity 9 sheets (a4 7...

  • Page 66: Caro No

    Deskside and office 230v 65 26/05/99 illustrated parts manuals series 7 shredders – 230v deskside and office models amendment record sheet issue no decription caro no 1 original - 2-6 not recorded - 7 amendment record sheet added page 28 – capacitor 30 mfd (metal cased) added as an alternative suppl...