1. DL manuals
  2. ACCO Brands
  3. Binding Machine
  4. T300
  5. Illustrated Parts Lists And Service Instructions

ACCO Brands T300 Illustrated Parts Lists And Service Instructions

Manual is about: THERMAL BINDER

Summary of T300

  • Page 1

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 1 t300 thermal binder 220-240v illustrated parts lists and service instructions compiled by issue no 2 approved by (technical manager) date rexel business machines, droitwich, worcestershire, wr9 9ap, england telephone +44 (0) 1905 7715...

  • Page 2: Table of Contents

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 2 table of contents illustrated parts manual t300 thermal binder 220-240v contents page 2 preface page 3 illustrated parts list - mouldings pages 4 – 5 mechanism and electrics pages 6 – 8 service instructions - to serial no a545817 page...

  • Page 3

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 3 preface service preparation this manual provides the instructions for the replacement of all the components that may become worn or damaged. Details of replacement parts and ordering information are given in associated illustrated par...

  • Page 4

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 4 mouldings no description part qty comment 1 service call decal d000185 1 not shown 2 bottom moulding d52501 1 3 on button – grey d52507 1 4 off button – red d52508 1 5 programme select button – yellow d52509 1 6 bind button – green d5...

  • Page 5

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 5 mouldings issue no 1.

  • Page 6

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 6 mechanism & electrics n o description part qty comments 1 heater assembly 230v 600w a52505 1 to serial no a545817 heater assembly 230v 600w a52527 1 from serial no a545818 2 heater extrusion d52503 1 to serial no a545817 heater extrus...

  • Page 7

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 7 mechansim & electrics to serial no a545817 issue no 1.

  • Page 8

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 8 mechansim & electrics from serial no a545818 issue no 1.

  • Page 9

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 9 service instructions this manual provides instructions for the replacement of components that may become worn or damaged. Warning check rating plate details are compatible with electric supply. Disconnect mains supply before removing ...

  • Page 10

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 10 section 2.0 (to serial no a545817) replace lid moulding 1. Remove lid from top cover, by bowing inwards to release hinge pins. 2. Replace lid. 3. Check that pivot pins are correctly aligned in top cover. 4. Check lid opens and closes...

  • Page 11

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 11 section 2.2 replacement of fixing blocks 1. Carry out procedures 1 to 4 section 2.1 2. Turn base moulding upside down. 3. Remove service decal and rating plate. 4. Unscrew four fixing screws 5. Blocks can now be replaced 6. Reassembl...

  • Page 12

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 12 section 3.0 replacement of pcb 1. Carry out procedures 1 to 7 section 1. 2. Replace the pcb 3. Reassemble machine in reverse sequence. Section 4.0 replacement of document support bar/spring/lever arm 1. Carry out procedures 1 to 4 se...

  • Page 13

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 13 replacement of thermistor 1. Carry out procedures 1 to 4 section 2.1 2. Remove thermistor for connection on pcb. 3. The pcb may be removed to ease replacement. If required refer to section 1 produce 6. 4. Replace thermistor 5. Revers...

  • Page 14

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 14 section 5.0 wiring diagram 220/240v wd317 to serial no a545817 issue no 1.

  • Page 15

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 15 service instructions this manual provides instructions for the replacement of components that may become worn or damaged. Warning check rating plate details are compatible with electric supply. Disconnect mains supply before removing...

  • Page 16

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 16 section 7.0 (from serial no a545818) replace lid moulding 5. Remove lid from top cover, by bowing inwards to release hinge pins. 6. Replace lid. 7. Check that pivot pins are correctly aligned in top cover. 8. Check lid opens and clos...

  • Page 17

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 17 section 7.3 replacement of insulation 6. Carry out procedures 1 to 4 section 7.1 7. Insulation is secured using double sided sticky tape. 8. Ease free sticky tape from insulation. 9. Remove and replace insulation. 10. Reassemble mach...

  • Page 18

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 18 section 9.0 replacement of document support bar/spring/lever arm 8. Carry out procedures 1 to 4 section 6. 9. To remove extension spring unhook from rear screw boss and lever arm. 10. Replace spring. 11. To remove lever arm carry out...

  • Page 19

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 19 wiring diagram 220/240v wd404 (from serial no a545818) issue no 1.

  • Page 20

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 20 section 11.0 specification sheet t300 power supply 220/240v 50hz height 95 mm width 370 mm depth 220 mm weight 2 kgs machine power 600w document size max a4 issue no 1.

  • Page 21: Issue

    Illustrated parts manuals t300 thermal binder 220-240v t300.Doc 21 amendment record sheet issue no decription caro no 1 original - 2 instructions altered to include double insulated product. 187 issue no 1.