1. DL manuals
  2. Accton Technology
  3. Network Router
  4. cheetahswitch workgroup-3024c
  5. Quick Installation Manual

Accton Technology cheetahswitch workgroup-3024c Quick Installation Manual

Manual is about: high-density fast ethernet switch with 24 10base-t/100base-tx ports

Summary of cheetahswitch workgroup-3024c

  • Page 1

    Cheetahswitch workgroup-3024c quick installation guide.

  • Page 3

    Quick installation guide cheetahswitch workgroup-3024c high-density fast ethernet switch with 24 10base-t/100base-tx ports.

  • Page 4

    Copyright © 1999 by accton technology corporation. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of accton technology corporation. Accton makes no warranties with respect to this documentation and disclaims any...

  • Page 5: Contents

    I contents introduction 1 installing the switch 1 package contents 1 description of hardware 1 mounting the switch 2 stacking switches on a flat surface 2 mounting switches in a rack 2 connecting the switch system 3 making a connection via an rj-45 station port 3 making a connection via an mdi daisy...

  • Page 6

    Ii.

  • Page 7: Quick Installation Guide

    Quick installation guide 1 1 introduction the cheetahswitch workgroup-3024c is a high-density switch that’s perfect for moving large workgroups from conventional 10mbps ethernet to multiple-segment 100mbps fast ethernet. This switch delivers dedicated 100mbps links to each attached lan segment (inde...

  • Page 8: Mounting The Switch

    Cheetahswitch workgroup-3024c 2 mounting the switch this switch can be placed directly on your desktop, or mounted in a rack. Before you start installing the switch, make sure you can provide the right operating environment, including power requirements, sufficient physical space, and proximity to o...

  • Page 9: Quick Installation Guide

    Quick installation guide 3 3 connecting the switch system the cheetahswitch provides 24 rj-45 ports on the unit. Each of these ports support connection to 10mbps ethernet or 100mbps fast ethernet, and supports full or half-duplex operation. The transmission speed for each port is automatically set b...

  • Page 10: Powering On The Switch

    Cheetahswitch workgroup-3024c 4 making a connection via an mdi daisy-chain port to make a direct connection to another compatible switch or hub, follow these steps: 1. Use port 24 on the switch, and set it to mdi for a daisy-chain connection. 2. Prepare straight-through shielded or unshielded twiste...

  • Page 11: Quick Installation Guide

    Quick installation guide 5 5 verifying port status check each connection by viewing the port status indicators shown in the following figure and table. Led state indication power on switch is receiving power. Link/act on port has established a valid network connection. Flashing traffic is traversing...

  • Page 12

    Cheetahswitch workgroup-3024c 6 bridging functions - this switch provides fully transparent bridging functions. It automatically learns node addresses, that are subsequently used to filter and forward all traffic based on the destination address. When traffic passes between devices attached to the s...

  • Page 13: Quick Installation Guide

    Quick installation guide 7 7 product specifications base unit access method csma/cd, 10 mbps or 100 mbps standards conformance ieee 802.3, ieee 802.3u communication rate 10/100 mbps communication mode full or half duplex media supported 10base-t - 100wcategory 3,4,5 twisted-pair 100base-tx - 100wcat...

  • Page 14: Troubleshooting

    Cheetahswitch workgroup-3024c 8 troubleshooting diagnosing switch indicators the switch can be easily monitored through panel indicators to assist the network manager in identifying problems. This section describes common problems you may encounter and possible solutions. Symptom: link indicator doe...

  • Page 15: Quick Installation Guide

    Quick installation guide 9 9 port and cable assignments rj-45 port description rj-45 station ports (mdi-x) can be attached to any devices which use a standard network interface (e.G., a workstation, server, bridge or router). Rj-45 daisy-chain ports (mdi) can be cascaded to a station port on similar...

  • Page 16

    Cheetahswitch workgroup-3024c 10 canada department of communications - class a this digital apparatus does not exceed the class a limits for radio noise emissions from digital apparatus as set out in the interfer-ence-causing equipment standard entitled "digital apparatus", ices-003 of the departmen...

  • Page 17: Quick Installation Guide

    Quick installation guide 11 11 safety compliance underwriters laboratories inc. (usa) important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following specification list. E g a tl o v s n o it a c if i c e p s t e s d r o c s...

  • Page 18: Warranty

    Cheetahswitch workgroup-3024c 12 14. Wenn folgende situationen auftreten ist das gerät vom stromnetz zu trennen und von einer qualifizierten servicestelle zu überprüfen: a. Netzkabel oder netzstecker sind beschädigt. B. Flüssigkeit ist in das gerät eingedrungen. C. Das gerät war feuchtigkeit ausgese...

  • Page 19

    Es3024c e1199-r02 150068-102.