DL manuals
Accton Technology
Switch
EH2045S
Package Contents Manual

Accton Technology EH2045S Package Contents Manual

Page of 8

Download

Print this page

Bookmark us

EtherHub-5st Quick Start Guide

5-Port 10BASE-T Smart Ethernet Hub

Thank you for purchasing our product. This quick start guide contains information necessary to

install and operate Accton’s EtherHub-5st smart Ethernet hub. This guide is designed for the

experienced network installer.

Package Contents

Your package includes the following:

•

EtherHub-5st (EH2045S).

•

Quick Start Guide

•

Power Adapter (optional)

Hardware Description

Frant and Side Panels, and Hub Stand

To stand the hub upright on a desk or nearby shelf, slide the stand onto the base of the hub. To

lay the hub flat on a convenient surface, slide the stand onto the back of the hub. Or to mount it

directly on a wall or office partition, first attachthe stand (i.e., mounting bracket) to the required

location with two small screws and then slide the back of the hub onto the bracket.

Use the stand to mount the

hub standing upright , lying

flat , or directly on a wall.

1 2 3 4 5 6 7 Next › »

Summary of EH2045S

Page 1
Etherhub-5st quick start guide 1 5-port 10base-t smart ethernet hub thank you for purchasing our product. This quick start guide contains information necessary to install and operate accton’s etherhub-5st smart ethernet hub. This guide is designed for the experienced network installer. Package conte...
Page 2
Etherhub-5st user’s guide 2 led indicators this hub provides led indicators for monitoring various network conditions. A glance at the front panel allows you to instantly monitor the status of each station port plus the overall condition of the hub. Rj-45 ports there are 5 rj-45 mdi-x station ports ...
Page 3
Etherhub-5st user’s guide 3 connect the hub to another hub in a daisy-chain configuration, if necessary. When daisy- chaining, use port 5mdi instead of station port 5mdi-x. To limit the number of hubs in a path (when daisy-chaining more than two hubs), link several hubs to one central hub. And make ...
Page 4
Etherhub-5st user’s guide 4 hub’s rj-45 pin assignments schematics for both straight and crossover twisted-pair cable are shown below. (note that crossover cable is only required if you cascade hubs via the rj-45 station ports; i.E., the 5mdi daisy-chain port is not used.) straight-through crossover...
Page 5
Etherhub-5st user’s guide 5 emi warning fcc class b certification accton technology corporation model number: eh2045s fcc id: hedeh2045s this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2. Thi...
Page 6
Etherhub-5st user’s guide 6 note: in order to maintain compliance with the limits of a class b digital device, accton requires that you use a quality interface cable when connecting to this device. Changes or modifications not expressly approved by accton could void the user’s authority to operate t...
Page 7
Etherhub-5st user’s guide 7 sicherheitshinweise 1. Die steckdose muß sich in der nähe des gerätes befinden und leicht zugänglich sein. 2. Zum reinigen den stecker aus der steckdose ziehen. Beim reinigen keine flüssigreiniger oder sprays verwenden, sondern ein angefeuchtetes tuch. 3. Das ethernet hub...
Page 8
Etherhub-5st user’s guide 8 warranty accton warrants to the original owner that the product delivered in this package will be free from defects in material and workmanship for the lifetime of the product. For the warranty to apply, you must register your purchase by returning the registration card i...