Accu-Scope 3088F Instructions Manual

Summary of 3088F

  • Page 2: 3088F Microscope Series

    Eyepiece objective stage i lluminator cord hanger nosepiece coarse adjustment knob fine focus knob 3088f microscope series stage clips disc or iris diaphragm (beneath stage) viewing head.

  • Page 3

    3 1.0 introduction congratulations on the purchase of your new accu-scope microscope. Accu-scope microscopes are engineered and manufactured to the highest quality standards. Your accu-scope microscope will last a lifetime if used and maintained properly. From schools to technical institutes, hobbyi...

  • Page 4

    4 5.0 maintenance please remember to never leave the microscope with any of the objectives or eyepieces removed, and always protect the microscope with the dust cover when not in use. 5.1 cleaning the microscope accumulated dirt on the metal surface should be cleaned with a damp cloth. More persiste...

  • Page 5

    Troubleshooting guide if a problem occurs during the course of use, please refer to the tables below before contacting your accu-scope distributor. Optical problem cause corrective measure darkness at the periphery revolving nosepiece not in revolve the nosepiece to click-stop position by or uneven ...

  • Page 6

    Image problems image moves while focusing specimen rises from stage secure the specimen in the surface slide holder revolving nosepiece is not revolve the nosepiece to the in the click-stop position click-stop position insufficient brightness aperture diaphragm closed open to the proper setting too ...