Summary of AB5500
Page 1
User guide value extension bill counter ab 5500
Page 2
3 table of contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 box contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 installation . . . . . . . . . . . . . ....
Page 3: Caution
4 important safety instructions ! Caution ! Warning do not use this product in areas where it may be exposed to water or other liquids. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Only use the cable provided with the...
Page 4: Other Safety Considerations
5 important safety instructions other safety considerations • read and understand all of the safety instructions. • follow all warnings and instructions marked on the unit. • this product should never be placed near or over a radiator or heater register this product should not be placed in a built-i...
Page 5: Introduction
6 introduction the ab5500 banknotes counter unit is the perfect solution for a fast, accurate and reliable banknote counting process. This machine is designed to meet the most demanding applications in today’s financial market. A simple and friendly user interface as well as its value extension func...
Page 6: Introduction
7 introduction box contents installation a) unpacking the unit after unpacking the unit, store the box and the packing material for future shipping. Failing to ship the unit in its original unit box and styrofoam will void the unit’s warranty. B) installation •select an appropriate workspace and mak...
Page 7
8 1.2 initializing procedure 1. After turning on, the unit will conduct a self-check procedure by spinning the rollers and showing the message “accubanker-ab5500” on the lcd display while all the electronic components are tested. 2. If an error message appears on the display, proceed in accordance w...
Page 8
9 2. General parts and controls 2.1 parts description 1. Hopper guiders 2. Hopper 3. Emergency stop button 4. Control panel 5. Stacker 6. Bill thickness adjustment knob 7. Handle 8. External display jack 9. Rs-232 printing port 10. Power outlet 11. Power switch.
Page 9
10 2.2 control panel description button functions • den: value extension function the user selects the specific denomination to count and at the end of the count - ing the display will show both data, the quantity of bills as well as the total amount of money involved in the counting. Note : in case...
Page 10
11 • mg $ / € : magnetic counterfeit detection function. This function allows the unit to analyze the magnetic characteristics of each bill during the counting. The unit will stop counting if a bill is considered suspicious. The mg function could be set up in three different levels: a. Usd-mg : for ...
Page 11: 3. Basic Operation
12 3. Basic operation 3.1 power up plug in the power cable and turn the unit on. It will conduct a self-check by spinning the rollers while the unit tests all the electronic parts. As soon as the unit’s display shows “0”, the unit is ready to start counting. In case any error message comes out in th...
Page 12: 3. Basic Operation
13 3. Basic operation 4.1 avoiding problems pre-select the notes you are going to count in the unit. Don’t attempt to count bills: a. With staples, metal clips, rubber bands or any other object b. Torn, washed or damaged c. Profusely stained d. Covered with any type of adhesive substance 4.2 jamming...
Page 13
14 4.4 cleaning the optical sensors for ensuring an accurate unit’s functioning is recommended to clean its optical sensors periodically. Dust or any kind of dirt will affect the unit’s performance considerably. The glass surfaces of the sensors may be wiped with a soft cloth soaked with alcohol eve...
Page 14
15 4.5 uv sensitivity adjustment the user is enable to adjust a specific setting for this function considering the specific uv sensitivity required for the counting or even disable it in case were required. 1. Keep pressing the “uv” key for 3 sec. 2. The display will show the current uv sensitivity ...
Page 15
16 5. Warning and error messages error messages possible causes solution uv alarm suspicious ultraviolet features a)remove the suspicious bill and count again. B)consider reduce the uv sensitivity mg alarm suspicious magnetic features a)remove the suspicious bill and count again. B)consider reduce t...
Page 16: 6. Unit Specifications
17 6. Unit specifications variable counting speed: 900, 1200 and 1600 notes / min feeding system: roller friction system (front-loading) hopper capacity: 200 old bills or 300 new bills stacker capacity: 100 old bills or 200 new bills banknote size range: 115mm x 50mm - 170mm x 85mm display : high re...