Instruction manual - d&rgw c-16 electric d&rgw c-16 accucraft trains 33268 central avenue union city, ca 94587, usa tel: 510 324-3399 fax: 510 324-3366 email: info@accucraft.Com.
Instruction manual - d&rgw c-16 electric thank you for selecting accucraft trains for your large scale modeling. Depending on your purchase, your selection is an accurate scale model of the denver & rio grande old or modern version of c16 2-8-0 locomotives. Your accucraft model is crafted in brass a...
Instruction manual - d&rgw c-16 electric general information about your “c16” - accucraft scale couplers are compatible with kadee #835 couplers. - model is powered by pittman dc gearhead motor, gm8712-31. Peak voltage 19.1v gear ratio 60.5:1 peak rated output torque 100 oz-in output shaft stall tor...
Instruction manual - d&rgw c-16 electric to avoid potential shipping damage, some pilots are moved from the model and installation is required. You should find a c16 pilot, hex-head m3 screws, and a hex-head screw driver inside the packing box. The pilot is attached to the front bumper with four hex...
Instruction manual - d&rgw c-16 electric window shades are provided with your c16 model. To install: 1. Cut the provided paper cloth to proper width (must be smaller than the window shade bracket) 2. Decide the length of shade 3. Cut the paper cloth to the length of shade + 10mm 4. Fold 5mm on each ...
Instruction manual - d&rgw c-16 electric tools you will need for maintenance - 1.5 mm allen wrench - 3 mm hex wrench (included) - flat head crew driver lubrication lubricants: always use quality lubricants! Light oil such as labelle #108 or whal clipper oil heavy lubricant such as labelle #102 heavy...
Instruction manual - d&rgw c-16 electric after following the recommended lubrication procedures your “c16” is ready to provide many years of reliable operation. We recommend that you use a d.C power supply with a capacity of 2.5 amps or larger. Always pick your model up by grasping it under the fram...
