Accucraft trains AL97-372 Instruction manual - N&w J-Class -
N&W J-Class -
Butane
Fired
3
Model Features:
This limited production model has
been handcrafted for Accucraft Trains
by BMMC, which is one of the most
respected makers of large scale brass
models. This museum quality model
features:
•
Detailed boiler with fittings,
Skyline casting, pipes and
handrails
•
Operating steel drive rods,
valve gear and cross heads
•
Prototypical livery and letter
ing
Technical Specifications:
Scale/Gauge: 1:32, 45mm Gauge
Total Weight:
28.8 lbs
Length:
42 in.
Width:
4.25 in.
Height:
7 in.
Recommend Radius: 3M, 10ft.*
Boiler water capacity
to top of water glass:
450ml
Tender water capacity: 600ml
Alcohol tank capacity: 500ml
*Be sure to leave at least 3” clear-
ance (measured from the inner rail) to
allow for overhang.
Caution!
This model is an accurate replica of the original locomotive. It has sharp and moving
parts. The locomotive drive rods are stainless steel with sharp edges.
OPERATORS MUST NOT COME IN CONTACT WITH A MODEL THAT IS BEING POW-
ERED AT ANY TIME. UNDER NO CIRCUMSTANCES SHALL ACCUCRAFT TRAINS
BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS-
ING IN REGARD TO ANY ACCUCRAFT PRODUCT.