Accucraft trains Climax Instruction Manual - Climax Live Steam
Climax Live Steam
Please read following directions be-
fore unpacking your locomotive.
1. Lift the box from the cardboard
box.
2. Place taped locomotive on a flat
surface. Carefully cut the tape along
the wood board side surface. Be sure
to cut both sides of the wood board.
Slowly lift the tape from the locomo-
tive. Be very careful with small parts.
Tape cannot be re-used to re-pack the
model. Use new packing tape if nec-
essary.
Caution!
This model is an accurate replica of
the original locomotive. It has sharp
and moving parts. The locomotive
drive rods are stainless steel with
sharp edges. AT ANY TIME, OPERA-
TORS MUST NOT COME IN CON-
TACT WITH THE MODEL WHILE
IT IS POWERED. UNDER NO CIR-
CUMSTANCES SHALL ACCUCRAFT
TRAINS BE RESPONSIBLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING IN REGARD TO
ANY ACCUCRAFT PRODUCT.
Accucraft Trains locomotives are fine
scale brass models with small parts.
To provide maximum protection from
shipping damage, we carefully pack
the models in metal cases. We ship
via UPS with insurance coverage to its
full value. Please contact UPS if pack-
age is damaged.
Each locomotive is packed under UPS
guideline for shipping. We don not
warrant any damage resulted from re-
packaging by any party other than Ac-
cucraft Trains.
10