Accucraft trains RUBY #5 Instruction Manual

Summary of RUBY #5

  • Page 1

    Accucraft company 33268 central avenue union city, ca 94587 tel: 510-324-3399 fax: 510-324-3366 email: info@accucraft.Com copyright 2009 instruction manual ruby #5 live steam.

  • Page 2

    Ruby live steam instructions 1 thank you for purchasing accucraft trains live steam locomotive ruby. Like other fi ne models from accucraft trains. Ruby has been designed to provide a lifetime of model railroading pleasure. Ruby is handcrafted in brass and is a precision piece of equip- ment. Like a...

  • Page 3

    Ruby live steam instructions 9 limited one-year warranty accucraft trains warrants that the mechanical components of its model trains will be free of any defect or malfunction under normal use for one year of the original purchaser and will remedy any mechanical components which prove to be thus mal...

  • Page 4

    Ruby live steam instructions 3 general information ruby is a freelance, 1:20.3 scale, live-steam locomotive based on baldwin practice. It has been designed to be both simple to operate and sophisticated enough to satisfy more experienced modelers. With proper care, ruby should give years of service ...

  • Page 5

    Ruby live steam instructions 7 running with the engine on the track, and without a train, open the throttle. Because the cylinders are cold, the hot steam entering them will condense into wa- ter and be exhausted out the stack. Hot water squirting out the stack at the start of a run is normal. Ruby ...

  • Page 6

    Ruby live steam instructions preparing the engine a steam-locomotive engineer goes through a lighting-up ritual every time the engine is to be run. It is good to follow the same routine each time so that nothing is overlooked. 1. Oil all external moving parts of the engine with a high grade, lightwe...