Accucraft trains SOUTHERN PACIFIC 2-10-2 F4 Instruction Manual

Summary of SOUTHERN PACIFIC 2-10-2 F4

  • Page 1

    Accucraft company 33268 central avenue union city, ca 94587 tel: 510-324-3399 fax: 510-324-3366 email: info@accucraft.Com copyright 2009 instruction manual southern pacific 2-10-2 f4/f5 live steam- butane fired.

  • Page 2

    Instruction manual sp 2-10-2 f4/f5 prototype information the southern pacific 2-10-2’s were general purpose locomotives and were used system wide. The stand out news story about this class of sp loco was that in 1922 twenty 2-10-2’s were shipped from baldwin in one train across the country and that ...

  • Page 3

    Instruction manual sp 2-10-2 f4/f5 9 sp 2-10-2 f4/f5 supplemental information after running these models on various radius it was found that on our test tracks this locomotive will negotiate 8 foot minimum radius. The manual states 10 foot minimum radius, and this should be regarded as a recommended...

  • Page 4

    Instruction manual sp 2-10-2 f4/f5 3 model features: this limited production model has been handcrafted for accucraft trains by bmmc, which is one of the most respected makers of large scale brass models. This museum quality model features: • detailed boiler with fi ttings, domes, pipes and handrail...

  • Page 5

    Instruction manual sp 2-10-2 f4/f5 7 with careful adjustments of this valve, the engine will always have enough water to keep running for long peri- ods of time until the tender water tank needs to be refi lled. The tender is also equipped with the hand pump, which needs to be used to prime the axle...

  • Page 6

    Instruction manual sp 2-10-2 f4/f5 5 you will hear the gas transferring and will see a little gas bleed out of the valve. The gas may tend to sputter a little from time to time while filling. When the tank is full, the gas will begin to sputter a lot and much more gas will escape the valve. When the...