1. DL manuals
  2. AccuLine
  3. Laser Level
  4. 40-6525
  5. Instruction Manual

AccuLine 40-6525 Instruction Manual

Manual is about: Self-Leveling Rotary Laser Level

Summary of 40-6525

  • Page 1

    ©2007 johnson level & tool 1 self-leveling rotary laser level model nos. 40-6525 and 40-6530 instruction manual congratulations on your choice of this self-leveling rotary laser level. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual fo...

  • Page 2: Table of Contents

    2 ©2007 johnson level & tool table of contents 1. Kit contents 2. Features and functions 3. Safety instructions 4. Location/content of warning labels 5. Location of parts/components 6. Operating instructions 7. Using the product 8. Accuracy self-check 9. Technical specifications 10. Application demo...

  • Page 3: 2. Features and Functions

    ©2007 johnson level & tool 3 2. Features and functions • magnetic dampening compensation system. • laser sounds alarm when outside its self-leveling range or the compensator is not locked when the laser is placed inside its case. • projects a horizontal rotating plane. • projects a vertical rotating...

  • Page 4: Warning!

    4 ©2007 johnson level & tool warning! The tinted goggles are designed to enhance the visibility of the laser beam. They do not offer protection to the eyes from direct exposure of the laser beam. Attention important • read all instructions prior to operating this laser tool. Do not remove any labels...

  • Page 5

    ©2007 johnson level & tool 5 4. Location/content of warning labels.

  • Page 6

    6 ©2007 johnson level & tool 5. Location of part/components rotating laser output widow handle vertical vial control panel battery box dc 6v power jack (40-6530 only) 90º beam output window lock/unlock symbol transportation locking knob hole for vertical mount adjusting knob.

  • Page 7: 6. Operating Instructions

    ©2007 johnson level & tool 7 6. Operating instructions important: it is the responsibility of the user to verify the calibration of the instrument before each use. Battery installation note: always check to be sure that the on/off switch is in the off position before removing and replacing batteries...

  • Page 8: Note:

    8 ©2007 johnson level & tool note: • for the first two charges of the new battery pack, it is necessary to charge for 12-plus hours. • the instrument can still work even if it is being charged with the adapter. • do not charge alkaline batteries to avoid explosion. • used (discharged) batteries are ...

  • Page 9: 7. Using The Product

    ©2007 johnson level & tool 9 7. Using the product operating panel 1. On/off button • pressing the button will turn the unit on / off after the transportation lock has been turned to unlock in the horizontal mode. 2. Power indicator light • lit indicator light means power-on. • unlit indicator light ...

  • Page 10: Important:

    10 ©2007 johnson level & tool 5. Up-counterclockwise/down-clockwise button in rotation mode • press up to increase rotation speed • press down to decrease rotation speed in scan mode • press down to make the scan line rotate clockwise • press up to make the scan line rotate counter-clockwise usage f...

  • Page 11: 1. Technical Specifications

    ©2007 johnson level & tool 11 detector usage (included in model no. 40-6530 only) 1. Technical specifications detecting accuracy fine ±0.039" (±1mm) coarse ±0.098" (±2.5mm) turn-off time 5 minutes operating voltage dc9v size 6-3/4" x 3" x 1" (0.266 x 0.118 x 0.029mm) weight 0.55 ibs (0.249 kg) dust ...

  • Page 12: 3. Operation Guide

    (b) display 1. Power symbol 2. Low battery symbol 3. Coarse/fine detection symbol 4. Horn symbol 5. Detecting position symbol 3. Operation guide (a) installation of battery • open the battery-box cap • put the 9v battery into the battery-box. Please note the polarity. Then close the battery-box cap....

  • Page 13

    ©2007 johnson level & tool 13 (c) using the detector bracket 1. Clamp bolt 2. Quick release button 3. Detector/bracket attachment screw (d) detection 1. Coarse detection • aim the receiving window at the rotating laser instrument. Loosen the clamp bolt and move the detector up and down to receive th...

  • Page 14

    14 ©2007 johnson level & tool 2. Fine detection 1. Power symbol 2. Fine detection symbol • press the coarse/fine detection button. The detector is ready for fine detection. • move the instrument up and down like the coarse detection procedure. • when the instrument displays as shown in the figure, i...

  • Page 15: Important:

    8. Self-check and calibration important: it is the responsibility of the user to verify the calibration of the instrument before each use. X-direction accuracy self-check 1. For clarity, we define the direction of handle as x-direction, and another direction as y-direction 2. Place the unit on a pla...

  • Page 16: Accuracy Calibration

    16 ©2007 johnson level & tool 6. Turn the instrument by 90° and place it on the platform, with the operating panel facing you. Perform y-direction self-check with the same method as x-direction self-check, and mark point c and point d by turns. 7. If point c and point d are within 1/16” at 50’, the ...

  • Page 17: 9. Technical Specifications

    ©2007 johnson level & tool 17 9. Technical specifications laser wavelength 635nm±10nm laser classification class iiia maximum power output ≤ 5mw accuracy ±1/8"/100 ft. (±1mm/10m) interior range up to 200 ft. (60m) diameter depending upon light conditions exterior range up to 2000 ft. (600m) diameter...

  • Page 18

    18 ©2007 johnson level & tool 10. Application demonstrations ceiling installation fence installation window installation squaring and leveling wall or footing construction cement floor installation anti-static flooring installation baseboard installation.

  • Page 19: 11. Care and Handling

    ©2007 johnson level & tool 19 11. Care and handling • this laser unit is a precision tool that must be handled with care. • avoid exposing unit to shock vibrations and extreme temperatures. • before moving or transporting the unit, make sure that the unit is turned off and in the locked position. Fa...

  • Page 20: Note:

    20 ©2007 johnson level & tool customer service department to obtain a return material authorization (rma) number for return to an authorized service center. Proof of purchase is required. Note: the user is responsible for the proper use and care of the product. It is the responsibility of the user t...

  • Page 21: 14. Accessories

    ©2007 johnson level & tool 21 14. Accessories acculine pro™ accessories are available for purchase through authorized acculine pro dealers. Use of non-acculine pro accessories will void any applicable limited warranty and there will be no warranty. If you need any assistance in locating any accessor...