1. DL manuals
  2. AccuLine
  3. Laser Level
  4. 40-6527
  5. Instruction Manual

AccuLine 40-6527 Instruction Manual - Attention

Manual is about: Self-Leveling Rotary Laser Level

Summary of 40-6527

  • Page 1

    ©2009 johnson level & tool 1 self-leveling rotary laser level model no. 40-6527 & 40-6532 instruction manual congratulations on your choice of this self-leveling rotary laser level. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual for f...

  • Page 2: Table of Contents

    2 ©2009 johnson level & tool table of contents 1. Kit contents 2. Features and functions 3. Safety instructions 4. Location/content of warning labels 5. Location of parts/components 6. Operating instructions 7. Using the product 8. Accuracy self-check 9. Technical specifications 10. Application demo...

  • Page 3: 3. Safety Instructions

    ©2009 johnson level & tool 3 3. Safety instructions please read and understand all of the following instructions, prior to using this tool. Failure to do so, may void the warranty. Danger! Class iiia laser product max. Power output: ≤ 5mw wavelength: 625-645nm this tool emits laser radiation. Do not...

  • Page 4: Attention

    4 ©2009 johnson level & tool attention important • read all instructions prior to operating this laser tool. Do not remove any labels from tool. • do not stare directly at the laser beam. • do not project the laser beam directly into the eyes of others. • do not set up laser tool at eye level or ope...

  • Page 5

    ©2009 johnson level & tool 5 ©2009 johnson level & tool 5 5. Location of part/components laser output window battery-case locking screw remote control receivers keypad vertical adjustment knob battery case 5/8” thread holes transportation locking knob calibration screw plug handle and vertical brack...

  • Page 6: 6. Operating Instructions

    6 ©2009 johnson level & tool 6 ©2009 johnson level & tool 6. Operating instructions important: it is the responsibility of the user to verify the calibration of the instrument before each use. Battery installation note: always check to be sure that the on/off switch is in the off position before rem...

  • Page 7: 7. Using The Product

    ©2009 johnson level & tool 7 ©2009 johnson level & tool 7 7. Using the product operating panel 1. Power key • press this key to turn on and off the power 2. Power led • when the led is lit the unit is connected to the power • when the led is off the unit is not receiving power • when the led is flas...

  • Page 8: Out of Level Alarm

    8 ©2009 johnson level & tool 8 ©2009 johnson level & tool 5. High rotation speed key press this key, the instrument will rotate in its highest speed 6. Rotation speed and scan keys in rotation mode • press the up arrow to increase rotation speed • press the down arrow to decrease rotation speed in s...

  • Page 9

    ©2009 johnson level & tool 9 ©2009 johnson level & tool 9 2. Place the instrument on a platform or tripod, connect to the tripod using the 5/8" thread at the bottom of laser. Note: if instrument is inclined beyond its self-leveling range, it will deliver an audible alarm. Re-position the instrument ...

  • Page 10

    10 ©2009 johnson level & tool 10 ©2009 johnson level & tool usage for vertical application important: keep the transportation “locking knob” in the “locked/off” position. 1. Install batteries/battery pack (40-6532 only) as previously discussed. 2. Set the laser down on its vertical bracket. 3. Turn ...

  • Page 11: 1. Technical Specifications

    ©2009 johnson level & tool 11 detector usage (included in model no. 40-6532) 1. Technical specifications detecting accuracy fine: ±0.039" (±1mm) coarse 1: ±0.098" (±2.5mm) when range ≥ 492 ft. (150m) coarse 2: ±0.394" (±10mm) when range ≥ 492 ft. (150m) automatic shut-off 6 min ±1min power supply 9v...

  • Page 12: 3. Operation Guide

    12 ©2009 johnson level & tool (b) display 1. Power on symbol 2. Low battery indicator 3. Fine/coarse symbol 4. Beeper symbol 5. Position indication arrows power key: turn on/off the power fine/coarse accuracy key: switch detecting accuracy led key: turn on/off the lcd’s light volume key: cycles betw...

  • Page 13: 4. Operating Instructions

    ©2009 johnson level & tool 13 4. Operating instructions power on press the power key to turn the unit on. The lcd display will illuminate all the indicator segments for 0.5 second (fig.2). When the indicator segments are no longer illuminated, the detector is ready for use. Note: the lcd display wil...

  • Page 14

    14 ©2009 johnson level & tool detecting laser level signals while detecting laser signals, the lcd will display as follows: (take the set-up state of high sound and fine detection as an example) when the laser signal is near the on-grade mark, the displayed up and down arrows will decrease as the di...

  • Page 15: Led Function

    ©2009 johnson level & tool 15 3. Keep the reception window facing the laser while detecting. 4. Hold the unit stable while detecting. Led function power on and press the led key, the lcd will now be backlit. Automatic shut-off function when the unit does not receive a laser signal for 6 minutes, the...

  • Page 16

    16 ©2009 johnson level & tool 8. Self-check and calibration important: it is the responsibility of the user to verify the calibration of the instrument before each use. X-direction accuracy self-check 1. Place the unit on a platform that is 30 feet away from a wall, with the battery case facing towa...

  • Page 17

    ©2009 johnson level & tool 17 x-direction accuracy calibration 1. Turn the lock knob to the “off’ position. 2. Remove the rubber plug from the x-direction self-calibration aperture inside the battery compartment. Adjust the weight screw inside the instrument core with a flathead screwdriver. 3. If p...

  • Page 18

    18 ©2009 johnson level & tool y-direction accuracy calibration 1. Turn the lock knob to the “off’ position. 2. Screw off the y-direction self-calibration aperture bolt located behind the handle. Adjust the weight screw inside the instru- ment core with a flathead screwdriver. 3. If point c is above ...

  • Page 19: 9. Technical Specifications

    ©2009 johnson level & tool 19 6. Adjust the adjusting knob to make the laser beam aim at e. 7. Check the bubble to see if it is centered. If it is not yet - instrument will need to be sent in for calibration. 9. Technical specifications laser wavelength 635nm±10nm laser classification class iiia max...

  • Page 20

    20 ©2009 johnson level & tool 10. Application demonstrations plumb reference for ceiling installation reference for anti-static flooring installation reference for window installation reference for flooring reference for squaring and leveling reference for cement floor installation 2294h 4/9/09 10:0...

  • Page 21: 11. Care and Handling

    ©2009 johnson level & tool 21 11. Care and handling • this laser unit is a precision tool that must be handled with care. • avoid exposing unit to shock vibrations and extreme temperatures. • before moving or transporting the unit, make sure that the unit is turned off. • remove the batteries when s...

  • Page 22: 13. Product Registration

    22 ©2009 johnson level & tool 13. Product registration enclosed with this instruction manual you will find a warranty card to be completed for product warranty registration. Product warranty registration can also be completed online at our web site www.Johnsonlevel.Com. You will need to locate the s...

  • Page 23

    ©2009 johnson level & tool 23 2294h 4/9/09 10:09 am page 23.

  • Page 24

    24 ©2009 johnson level & tool 2294h 4/9/09 10:09 am page 24.