1. DL manuals
  2. AccuLine
  3. Laser Level
  4. 40-6600
  5. Instruction Manual

AccuLine 40-6600 Instruction Manual

Manual is about: Self-Leveling 3-Line Laser Level

Summary of 40-6600

  • Page 1

    ©2005 johnson level & tool 1 self-leveling 3-line laser level model nos. 40-6600 and 40-6610 instruction manual congratulations on your choice of this self-leveling 3-line laser level. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual fo...

  • Page 2: Table of Contents

    2 ©2005 johnson level & tool table of contents 1. Kit contents 2. Features and functions 3. Safety instructions 4. Location/content of warning labels 5. Location of parts/components 6. Operating instructions 7. Using the product 8. Self-check and calibration 9. Technical specifications 10. Applicati...

  • Page 3: 2. Features and Functions

    ©2005 johnson level & tool 3 2. Features and functions • able to project one cross laser, and one vertical line at 90 degrees. • magnetic dampening compensation system. • laser flashes and audible alarm when product is beyond leveling range. • low voltage indication with power indication lamp flashi...

  • Page 4: Warning!

    4 ©2005 johnson level & tool warning! The tinted goggles are designed to enhance the visibility of the laser beam. They do not offer protection to the eyes from direct exposure of the laser beam. Attention important • read all instructions prior to operating this laser tool. Do not remove any labels...

  • Page 5

    ©2005 johnson level & tool 5 4. Location/content of warning labels 40-6600_6610 4/22/05 4:56 pm page 5.

  • Page 6

    6 ©2005 johnson level & tool 5. Location of part/components 1. Front laser emitting window 2. Front vertical-beam button v1 3. Front vertical-beam indicator lamp 4. Front horizontal-beam side button h 5. Front horizontal-beam indicator lamp 6. Side vertical-beam indicator lamp 7. Side vertical-beam ...

  • Page 7: 6. Operating Instructions

    ©2005 johnson level & tool 7 6. Operating instructions important: it is the responsibility of the user to verify the calibration of the instrument before each use. Battery installation note: always check to be sure that the on/off switch is in the off position before removing and replacing batteries...

  • Page 8: 7. Using The Product

    8 ©2005 johnson level & tool 7. Using the product unlocking 1. The unit should be in locked state when it is not in use. Unlock the unit by rotating the base clockwise (according to indicated direction shown on the unit) to set it to unlocked position when you start to use it. Then you can move the ...

  • Page 9: Note:

    ©2005 johnson level & tool 9 note: check whether the unit is in locked position before it is put into carrying case. If not, during movement the unit will give an alarm as reminder, with automatic laser beam flashing at the same time. Tripod/wall mount bracket 1. The tripod/wall mount bracket can be...

  • Page 10: Note:

    10 ©2005 johnson level & tool 4. Turn the unit 180°, have the cross located on staff b and note the value of b1. 5. Move the tripod to change the distance between the unit and staff a to 2 ft. (0.6m). 6. Repeat steps c, d and note down a2, b2. 7. Calculate: (a1-a2)-(b1-b2)=e note: if e>0.047" (1.2mm...

  • Page 11: 9. Technical Specifications

    ©2005 johnson level & tool 11 9. Technical specifications laser wavelength 635nm±10nm laser classification class ii maximum output horizontal accuracy ±3/8"/100 ft. (±3mm/10m) vertical accuracy ±3/8"/100 ft. (±3mm/10m) working range maximum 100 ft. (30m) depending upon light conditions self-leveling...

  • Page 12

    10. Application demonstrations 12 ©2005 johnson level & tool reference for installing cabinets reference for installing partitions reference for hanging pictures reference for installing suspended ceilings plumb reference for baseboard installation reference for laying tile reference for dormer inst...

  • Page 13: 11. Care and Handling

    ©2005 johnson level & tool 13 11. Care and handling • this laser unit is a precision tool that must be handled with care. • avoid exposing unit to shock vibrations and extreme temperatures. • before moving or transporting the unit, make sure that the unit is turned off and in the locked position. Fa...

  • Page 14: Note:

    14 ©2005 johnson level & tool customer service department to obtain a return material authorization (rma) number for return to an authorized service center. Proof of purchase is required. Note: the user is responsible for the proper use and care of the product. It is the responsibility of the user t...

  • Page 15: 14. Accessories

    ©2005 johnson level & tool 15 14. Accessories acculine pro™ accessories are available for purchase through authorized acculine pro dealers. Use of non-acculine pro accessories will void any applicable limited warranty and there will be no warranty. If you need any assistance in locating any accessor...