AccuLine 40-6620 Instruction Manual

Other manuals for 40-6620: Instruction Manual
Manual is about: Self-Leveling Cross-Line Laser Level

Summary of 40-6620

  • Page 1

    ©2007 johnson level & tool 1 self-leveling cross-line laser level model no. 40-6620 and 40-6625 instruction manual congratulations on your choice of this self-leveling cross-line laser level. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction ma...

  • Page 2: Table of Contents

    2 ©2007 johnson level & tool table of contents 1. Kit contents 2. Features and functions 3. Safety instructions 4. Location/content of warning labels 5. Location of parts/components 6. Operating instructions 7. Using the product 8. Self-check and calibration 9. Technical specifications 10. Applicati...

  • Page 3: 3. Safety Instructions

    3. Safety instructions please read and understand all of the following instructions, prior to using this tool. Failure to do so, may result in bodily injury. ©2007 johnson level & tool 3 attention important • read all instructions prior to operating this laser tool. Do not remove any labels from too...

  • Page 4: Warning!

    4 ©2007 johnson level & tool warning! The tinted goggles are designed to enhance the visibility of the laser beam. They do not offer protection to the eyes from direct exposure of the laser beam. Caution: if using this product with any type of tinted goggles, please note safety warning below. Cautio...

  • Page 5: 40-6625

    ©2007 johnson level & tool 5 4. Location/content of warning labels 40-6625 40-6620

  • Page 6: Instrument

    6 ©2007 johnson level & tool 5. Location of part/components instrument manual mode button power indicator light on/off switch rubber jacket laser output window 1/4” – 20 thread 5/8” thread window frame assembly side calibration.

  • Page 7: Special Base

    ©2007 johnson level & tool 7 special base 6. Operating instructions battery installation note: always check to be sure that the on/off switch is in the off position before removing and replacing batteries. 1. Open the battery-box cover and put in three “aa” batteries according to the illustrated pol...

  • Page 8: 7. Using The Product

    8 ©2007 johnson level & tool note: • pay attention to the polarity of the batteries. • used (discharged) batteries are hazardous waste and should be disposed of properly. 7. Using the product this base was specially designed for more extensive adaptability of the instrument. Both the instrument and ...

  • Page 9: Note:

    ©2007 johnson level & tool 9 manual mode operating instructions 1. Locate the manual mode button (fig. 9) on the side of the instrument, above the on/off switch (fig. 10). 2. When the unit is turned on, push the button once to engage the manual mode feature. Red light next to manual mode button will...

  • Page 10

    10 ©2007 johnson level & tool 8. Self-check and calibration important: it is the responsibility of the user to verify the calibration of the instrument before each use. 1. Set the instrument on a level flat head tripod centered between two walls (marked 1 & 2) approximately 15 feet apart. (see fig. ...

  • Page 11: Calibration

    ©2007 johnson level & tool 11 calibration re-calibration can be performed as described below. 1. Use a level to mark a horizontal reference line on the wall. 2. Power on the unit to compare the projected horizontal line with its references. Compensator has to be locked before making calibration adju...

  • Page 12

    12 ©2007 johnson level & tool installing partitions hanging pictures installing baseboards dormer installation 10. Application demonstrations fixing doors and windows laying tile setting pipelines fixing cabinets.

  • Page 13: 12. Product Warranty

    ©2007 johnson level & tool 13 12. Product warranty johnson level & tool offers a one year limited warranty on each its products. You can obtain a copy of the limited warranty for a johnson level & tool product by contacting johnson level & tool's customer service department as provided below or by v...

  • Page 14: 13. Product Registration

    14 ©2007 johnson level & tool note: the user is responsible for the proper use and care of the product. It is the responsibility of the user to verify the calibration of the instrument before each use. For further assistance, or if you experience problems with this product that are not addressed in ...

  • Page 15: 14. Accessories

    ©2007 johnson level & tool 15 14. Accessories acculine pro™ accessories are available for purchase through authorized acculine pro dealers. Use of non-acculine pro accessories will void any applicable limited warranty and there will be no warranty. If you need any assistance in locating any accessor...

  • Page 16

    16 ©2007 johnson level & tool.