1. DL manuals
  2. Accurist
  3. Watch
  4. 6P20
  5. Setting instructions manual

Accurist 6P20 Setting instructions manual

Other manuals for 6P20: Instructions Manual
Manual is about: Automatic / Quartz Analogue Watch

Summary of 6P20

  • Page 1

    Accurist helpline 020 7447 3945 further information or instructions can be obtained from the accurist helpline during office hours monday to friday. Automatic / quartz analogue watch setting instructions including 8n24, ym22a, gp00 / gp01, 6p23 / 6p20 / 6p21 / jr00 / miyota purchased from date of pu...

  • Page 2: Contents

    2 contents how to use these instructions 4 the britishrealtime project • www.Britishrealtime.Com 5 quartz analogue operating instructions 7 8n24 - automatic skeleton movement operating instructions 13 gp00 / gp01 retrograde operating instructions 15 ym22a operating instructions 17 6p23 operating ins...

  • Page 3: Caseback Markings

    3 caseback markings.

  • Page 4: Further Information

    4 how to use these instructions this booklet contains setting instructions for the accurist quartz analogue series of watches. Each section describes a particular calibre (also called watch movement) which offers a unique set of functions and features. As such, it is necessary to identify the correc...

  • Page 5

    The britishrealtime project • www.Britishrealtime.Com the britishrealtime clock has been designed and developed to replace our sponsorship of the british telecom speaking clock. Having been sponsors of the speaking clock for over 22 years and having received 3.5 billion calls we felt that it was tim...

  • Page 6

    Filming started in september 2008 at the international jewellery fair, london and since then over 6,000 people have been filmed across the country including lakeside, cardiff, sheffield, glasgow, gateshead, dudley, manchester, and croydon. Filming will continue well into 2009 as the clock continues ...

  • Page 7

    Position a position b quartz analogue operating instructions 7.

  • Page 8: To Set The Time:

    Please note: the second hand will not start moving until the crown has been returned to position a. To set the time: 1. Gently pull out crown to position b. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set your watch accurately visit www.Britishrealtime.Com 8.

  • Page 9: For Calendar Models

    Position a fri 12 position b position c quartz analogue operating instructions continued... For calendar models 9.

  • Page 10: To Set The Calendar/date:

    To set the calendar/date: 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date, clockwise to adjust the day. 3. Push in crown to position a. Note: the day will start to change at 11.25 p.M. And complete its change by 12 0’ clock midnight. The date will start to change ...

  • Page 11: For Alarm Models

    Position a alarm indicator hand alarm on / off button position b position c quartz analogue operating instructions continued... For alarm models 11.

  • Page 12: To Set The Alarm:

    To set the alarm: 1. Gently pull out crown to position b. 2. Turn crown clockwise to adjust the alarm indicator hand. 3. Push in crown to position a. To switch alarm on, gently pull out alarm on/off button. To switch alarm off, depress the alarm on/off button. Note: the alarm will sound for 15 secon...

  • Page 13

    8n24 - automatic skeleton movement operating instructions the watch to wind itself. Wearing the watch on your wrist for a further 6 hours will fully wind the mainspring and will create a reserve power between 30 – 40 hours. If the watch is not worn for a period of time or only worn occasionally, the...

  • Page 14: To Wind The Mainspring:

    Position a position b to wind the mainspring: 1. Ensure crown is in position a (normal time mode) 2. Turn crown clockwise approximately 15 – 20 times. To set the time: 1. Gently pull out crown to position b. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set your watch ...

  • Page 15: To Set The Time:

    Date window (gp00) date window (gp01) retrograde (dual time) position a position b position c to set the time: 1. Gently pull out crown to position c. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set your watch accurately visit www.Britishrealtime.Com date window at 1...

  • Page 16: To Set The Calendar/date:

    To set the calendar/date: 1. Gently pull out crown to position b. 2. Turn crown clockwise to adjust date. 3. Push in crown to position a. 24 hour / dual time hand at 6-hour position. To set 24 hr hand / dual time (retrograde): 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to a...

  • Page 17: Ym22A Operating Instructions

    Ym22a operating instructions to set the time: 1. Gently pull out crown to position c. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set your watch accurately visit www.Britishrealtime.Com to set the date: 1. Gently pull out crown to position b. 2. Turn crown clockwise ...

  • Page 18: To Set The Dual Time:

    To set the dual time: 1. Gently pull out crown to position c. 2. Push the bottom right (br) button to set dual time. Press and hold br button to quick change the dual time hands. 3. Push in crown to position a. Please ensure you set up the dual time before you set up the alarm. To set the alarm: 1. ...

  • Page 19: 6P23 Operating Instructions

    24 hour dial position a position c position b date dial 6p23 operating instructions 19.

  • Page 20: To Set The Time:

    To set the time: 1. Gently pull out crown to position c. 2. Turn crown either way to correct time. 3. Push in crown to position a. To set your watch accurately visit www.Britishrealtime.Com to set the date: 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date. 3. Push ...

  • Page 21

    Position a 24 hour display date position c day position b 21 position a age of the moon date position c day position b 6p29 / 6p20 / 6p21 operating instructions.

  • Page 22: To Set The Time/day

    To set the time/day 1. Gently pull out crown to position c. 2. Turn crown either way to set the time. 3. Push in crown to position a. To set your watch accurately visit www.Britishrealtime.Com to set the day of the week 1. Gently pull out crown to position c. 2. Turn crown clockwise to advance the h...

  • Page 23: To Set The Date

    23 to set the date 1. Gently pull out crown to position b. 2. Turn crown anti-clockwise to adjust date. 3. Push in crown to position a. To set the moon age: note: more accurate settings can be made during a new moon (when the centre of the moon aligns to ‘0’ on the scale) or during a full moon (when...

  • Page 24: To Read The Moon Age:

    24 to read the moon age: note: the age of the moon is determined by the period between each new moon. This period is approximately 29.5 days. The moon dial can be used as a guide to moon phase and tides. New moon moon's age: 0 spring tide first quarter moon moon's age: 7 neap tide full moon moons ag...

  • Page 25

    For electro-luminescent models electro-luminescent is state-of-the-art technology which allows you to read your watch under any lighting conditions. To operate depress the electro-luminescent button. Note: the battery life will be affected by the number of times the e l display is operated; based on...

  • Page 26: Jr00 Operating Instructions

    Jr00 operating instructions position a retrograde day hand position b normal position minute hand date hand hour hand 24 hour hand second hand 26.

  • Page 27: To Set The Time:

    To set the time: 1. Pull the crown out to position b. 2. Turn the crown to set hour and minute hands. To set your watch accurately visit www.Britishrealtime.Com to set the date: * please do not set the date between 9.00pm and 1.00am 1. Pull the crown out to position a. 2. Turn the crown counter cloc...

  • Page 28

    M t w t f s s m t w t f s s please do not stop when the day hand is in this position please set the day hand just positioned on the day scale 28.

  • Page 29: To Set The Day:

    To set the day: * please do not set the day between 11.00pm and 3.00am. 1. Pull the crown out to position a. 2. Turn the crown clockwise very slowly to set the day. * please do not stop when the hand is between the day as shown in fig 1. * if the day hand stops at a position like in fig 1. Please tu...

  • Page 30

    Normal crown position date minute hand 1st position 2nd position 24 hour hand 24 hour hand date position may be located at different position depends on model. Miyota watch movement operating instructions 30

  • Page 31

    Setting the time: 1. Pull the crown out to the 2nd position. 2. Turn the crown to set hour and minute hands. 3. When the crown is pushed back to the normal position, second hand begins to run. Setting the date: 1. Pull the crown out to the 1st position. 2. Turn the crown counter-clockwise to set the...

  • Page 32: Care of Your Watch

    Care of your watch avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; thi...

  • Page 33: Avoid Strong Shocks

    Avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets 2. Generally, your watch is n...

  • Page 34: Periodic Inspection

    Care of your watch continued . . . Avoid harmful chemicals, solvents & gases 1. Avoid wearing your watch in the presence of strong chemicals, solvents or gases. 2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint...

  • Page 35: Important

    35 important 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep you watch clean wipe off any moisture that adheres to the case, gl...

  • Page 36: Weee Directive

    36 weee directive the crossed-out wheeled bin indicates that used electrical and electronic equipment should not be mixed with general domestic waste. There is a separate collection point for these products. The objectives of the community’s environment policy are, in particular, to preserve, protec...

  • Page 37: Non Eu Countries

    37 weee directive continued . . . Non eu countries if you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. Otherwise please return to accurist headquarters, who will see to the products disposal. Disposal information for business users e...

  • Page 38: Bracelet Adjustment

    38 bracelet adjustment the bracelet requires a small adjustment and the model has a z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole..

  • Page 39: Z-Type Clasp.

    39 the bracelet requires a significant adjustment or the model does not have a z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch. 3. Follow the instructions in the after sales service section to return your w...

  • Page 40: United Arab Emirates

    40 international service agents international service headquarters accurist watches limited, asher house, blackburn road, west hampstead, london, nw6 1aw tel: +44 (0)20 7447 3945, fax: +44 (0)20 7447 3946 united arab emirates al abbas, p.O. Box 45999, dubai, uae tel: 00971 4 351 2440, fax: 009714 35...

  • Page 41: Netherlands

    41 netherlands sabre nederland b.V., ellermanstraat 23, 1099 bx amsterdam, the netherlands tel: 0031 20 692 8888, fax: 0031 20 665 2184 switzerland nimex ag, raffelstr 11, ch - 8045, zurich, switzerland tel: 0041 44 462 91 91, fax: 0041 44 462 91 81 norway thune, nils hansensvei 2, n - 0667 oslo, no...

  • Page 42: Kingdom of Saudi Arabia

    42 kingdom of saudi arabia al asasyah, sitteen street, p.O. Box 19248 - 19249, jeddah 21435 tel: 00966 672 6826, fax: 00966 676 2262 n. Antilles j best jeweler, 2 front street, philipsburg, st. Maarten, n. Antilles tel: + 599 542 2294, fax: + 599 542 1351, us toll free 1 877 j is best cyprus a chrys...

  • Page 43: Resistance to Water

    43 resistance to water indications on dial or caseback light spray, dial caseback perspiration, swimming light rain etc... Bathing, etc... - water resistant ok x water resistant water resistant ok ok 50m (5 atm) water resistant water resistant ok ok 100m (10 atm) water resistant water resistant ok o...

  • Page 44

    44 diving: skin diving: scuba diving: when using a diving without diving with helium enriched an air tank an air tank environment x x x x x x ok x x ok ok x.

  • Page 45: Resistance to Water

    45 resistance to water important - never pull out the crown when the watch is wet. • tighten screwlock crown completely. • water resistance is not a permenant property. We strongly recommend you return your watch for resealing every 4 - 5 years and/or when changing batteries. • “water resistant” may...

  • Page 46: Accurist Guarantee

    46 accurist guarantee the terms of this guarantee provide rights that are in addition to your statutory rights and do not in any way limit or otherwise affect those statutory rights. Your accurist watch is guaranteed for 3 years from the date of original retail purchase against any malfunction of th...

  • Page 47

    47 accurist quartz guarantee continued . . . When returning your watch, please indicate brief details of the nature of the problem and the repair required. We will, at our option, repair or replace your watch with a model of similar appearance or value. After the expiry of this guarantee the accuris...

  • Page 48

    48 after sales service each accurist watch comes with a lifetime commitment to quality after sales service. Our award winning customer service team are dedicated to providing expert servicing from bracelet adjustments to full overhaul. We pride ourselves in identifying our customer's requirements an...

  • Page 49

    49 payment & postage instructions 1. Complete the payment details form opposite. 2. Return the watch and payment details form together with this guarantee to the accurist service centre address listed on page 40. 3. Enclose a cheque, postal order or mastercard/visa payment for £5.00 payable to accur...

  • Page 50

    P e rf or ation 50 for all other countries 1. Return the watch with payment to your nearest international service agent (see page 40). 2. Enclose a cheque for €7.50. This covers return postage and insurance for loss or damage whilst in transit or undergoing repairs. No liability for loss or damage w...