1. DL manuals
  2. Accurist
  3. Watch
  4. 6W50
  5. Operating Instructions Manual

Accurist 6W50 Operating Instructions Manual

Summary of 6W50

  • Page 1

    Caseback markings w mb 119 cal 0t10 sr927w accurist watches logo model number calibre number battery number.

  • Page 2: Further Information

    How to use these instructions this booklet contains setting instructions for the accurist chronograph alarm series of watches. Each section describes a particular calibre (also called watch movement) which offers a unique set of functions and features. As such, it is necessary to identify the correc...

  • Page 3

    Position a 24 hour indicator dial calendar month dial stop watch dial timer minute dial mode indicator dial bottom right (br) bottom left (bl) top left (tl) top right (tr) position b 6w50 operating instructions.

  • Page 4: Calibration Of Watch:

    Calibration of watch: before use, please be sure watch is calibrated to ‘0’ position. 1. Press br button to set the ‘mode indicator dial’ to ‘0’. All hands should go to 12 o’clock position. Please note the hands on the 24-hour indicator dial will go to 24hr position. If not, then: 2. Gently pull br ...

  • Page 5: To Set The Time:

    6w50 operating instructions continued . . . To set the time: 1. Press br button to select time ‘tme’ on mode indicator dial. 2. Gently pull br button to position b. 3. Press tr button to zero second hand. When second hand is between 30-59 seconds, the minute hand will advance to the next full minute...

  • Page 6: To Set Calendar:

    To set calendar: 1. Press br button to select ‘cal’ mode. 2. Gently pull br button out to position b. 3. Press tl button until ‘calendar month indication dial’ shows correct month. 4. Press tr button until seconds hand indicates correct date, along the edge of the main dial. 5. Press br button to po...

  • Page 7: To Set Quick Alarm: Al-1

    6w50 operating instructions continued . . . To set quick alarm: al-1 1. Press br button to select ‘al-1’ mode. 2. To adjust minutes and hours for alarm time. Press tl button to move hands forward (clockwise) press bl button to move hands backward (anti-clockwise) 3. Alarm is now set. Press tr button...

  • Page 8: To Set Daily Alarm: Al-2

    To set daily alarm: al-2 1. Press br button to select ‘al-2’ mode. 2. Gently pull out br button to position b. The hands will move automatically to the previous alarm setting. 3. To adjust minutes and hours for alarm time. Press tl button to move hands forward (clockwise) press bl button to move han...

  • Page 9: Chronograph Measurement:

    6w50 operating instructions continued . . . To set daily alarm: al-2 continued . . . 5. Alarm is now set. It will sound every day for 15 seconds or until tr button is pressed. 6. Push br button in to position a, to show next required function. Chronograph measurement: 1. Press br button to select ch...

  • Page 10: Split Timing:

    Split timing: 1. Pressing bl button allows time to be checked for 10 seconds. After which it will automatically continue uninterrupted. 2. After stopping the timing by pressing tr button, either: 3. Hold down tl button to read off fractions of second on stopwatch dial recorded in total time, or 4. P...

  • Page 11: To Set Local Time:

    6w50 operating instructions continued . . . To set local time: 1. Press br button to select the local time function ‘l-tm’ 2. Gently pull br button out. 3. Press tl button to move hands forward (clockwise) press bl button to move hands backward (anti-clockwise) note, minute hand moves in 30-minute i...

  • Page 12: All Reset Function:

    All reset function: 1. Gently pull br button out. 2. Press and hold tr, tl and bl buttons simultaneously for 3 seconds. 3. Release all buttons, confirmation ‘bleep’ will sound. 4. Push br button in to position a. 5. Press br button to set the functional dial to ‘0’ position. Set up watch by referrin...

  • Page 13

    Position a mode function hand bottom right (br) function hand top right (tr) position b position c 24 hour hand as10 operating instructions.

  • Page 14: To Set The Time:

    To set the time: 1. Turn the crown and align the mode function hand to ‘tme’ mode. 2. Gently pull out crown to position c. 3. Turn crown either way to correct time. Turning the crown rapidly either way (continuously clicking two or more times) causes the hands to automatically advance rapidly. When ...

  • Page 15: To Set The Calendar/date:

    As10 operating instructions continued . . . To set the calendar/date: 1. Turn the crown and align the mode function hand to ‘tme’ mode. 2. Gently pull the crown to position b. The second hand rapidly advances to the month display position stored in memory. 3. Press br button to align second hand to ...

  • Page 16: Note:

    4. Turn crown anti-clockwise to correct the day. Turning the crown rapidly anti-clockwise (continuously clicking two or more times) causes the date to automatically advance rapidly. When stopping the date, click the crown once to the right or left. When the date is not stopped manually, it stops aut...

  • Page 17: Using The Chronograph:

    As10 operating instructions continued . . . Using the chronograph: the chronograph is able to measure time up to a maximum of 59 minutes 59.95 seconds in 1/20th second units, after which it resets to 0 seconds. Chronograph measurement: 1. Turn the crown and align the mode function hand to ‘chr’ mode...

  • Page 18

    3. When chronograph is stopped, press and hold br button to display 1/20th seconds hand. 4. Press and hold the tr button to reset chronograph hand to the 0 position. To reset chronograph hands: 1. Turn the crown and align the mode function hand to ‘chr’ mode. The second hand rapidly advances to the ...

  • Page 19

    As10 operating instructions continued . . . To reset chronograph hands continued . . . 5. Press tr button intermittently until the second hand is reset to the 0 position. 6. Turn crown either way to correctly position hour and minute hands to the 0 position. Turning the crown rapidly in either direc...

  • Page 20: Note:

    Note: pressing and holding either the tr or br button will cause the hands to continue to move until the button is released. Setting local time: the local time function allows the time in a different time zone to be set separately from the current time. Local time is set by performing a time differe...

  • Page 21

    As10 operating instructions continued . . . Setting local time continued . . . Time difference correction procedure: 1. Turn the crown and align the mode function hand to ‘l-t’ mode. 2. Gently pull out crown to position c (local time setting position) 3. Turn crown either way to correct the time dif...

  • Page 22: Note:

    Note: if the hour hand passes 12:00 am (midnight) during correction, the date is advanced by 1 day following completion of hand movement. If the time difference is corrected in the counter-clockwise direction and the hour hand passes back over 12:00 am, although the date is corrected following compl...

  • Page 23

    As10 operating instructions continued . . . Using the alarm continued . . . 1. Turn the crown and align the mode function hand to ‘alm’ mode. The second hand rapidly advances to the ‘on’ or ‘off’ position. 2. Gently pull out crown to position c (alarm setting position) the alarm setting is turned ‘o...

  • Page 24: Note:

    Note: please be sure to correctly set ‘am’ and ‘pm’ by referring to the 24 hour hand. Switching alarm on and off the alarm is switched on and off each time the tr button is pressed when the crown is pulled out to position b or position c in the alarm mode. Alarm tone monitor when the tr button is pr...

  • Page 25: All Reset

    As10 operating instructions continued . . . All reset 1. Turn the crown and align the mode function hand to ‘chr’ mode. The second hand rapidly advances to the 0 position and the watch enters the chronograph mode. 2. Gently pull the crown to position c (0-position correction mode) each of the hands ...

  • Page 26: Note:

    Note: following the all-reset procedure, make sure to properly reset each mode after performing 0-position correction for each hand before using the watch.

  • Page 27

    Position a minute chronograph hand crown bottom left (bl) second chronograph hand alarm switch top right (tr) top left (tl) position b position c hour chronograph hand 3s10 operating instructions.

  • Page 28: To Set The Time:

    To set the time: 1. Gently pull out crown to position c. The second hand will return to the 12 o’clock position and stop automatically. If not, then press the tr button, each press will advance it by 1 second. 2. Turn crown either way to correct time. 3. Push in crown to position a. 4. For rapid adj...

  • Page 29: To Set The Date:

    3s10 operating instructions continued . . . To set the date: 1. Gently pull out crown to position b. 2. Turn crown clockwise to adjust date. 3. Push in crown to position a. Chronograph measurement: 1. Press bl button to put watch in chronograph mode. 2. Press tr button to start and stop the chronogr...

  • Page 30: Note:

    Note: after 3 minutes, the 2/100th second hand will stop at the zero position to preserve battery life; however, the time is still being measured to 2/100th second and when the tr button is pressed to stop the chronograph timing. The 2/100th second hand will automatically move to show that time. Cou...

  • Page 31: Chronograph Reset:

    3s10 operating instructions continued . . . Chronograph reset: please follow these instructions if your watch hands fail to return to the 12 o’clock position when the bl button is depressed. 1. Gently pull crown to position c. 2. Push tr button to advance second hand to the 12 o’clock position. 3. P...

  • Page 32: To Set Timer:

    To set timer: 1. Press tl button to advance the timer hand by one mark. If button is depressed the hand rapidly advances. 2. Press tr button to start timer, a confirmation sound will ring. When initiated the timer hand will advance for 1 minute. When the remaining time is within 50 seconds, it switc...

  • Page 33

    3s10 operating instructions continued . . . To set the alarm continued . . . 1. Gently pull out alarm switch. 2. Pull crown to position b. Hands will rotate to previously set alarm time. 3. For rapid adjustment, rotate the crown quickly. Hands will start to rotate automatically. 4. To stop hands, mo...

  • Page 34: Note:

    Note: when alarm sounds push in alarm switch to stop alarm from sounding. When alarm switch is on, the alarm will sound twice a day. (a.M. And p.M. For 20 seconds).

  • Page 35

    Os80 & os81 operating instructions position a chronograph second hand dial chronograph minute hand alarm indicator hand (model os80) alarm indicator hand red: on (model os81) bottom right (br) bottom left (bl) top right (tr) alarm hand position b position c chronograph hour hand on off.

  • Page 36: To Set The Time:

    To set the time: 1. Gently pull out crown to position c. The second hand will stop at the 0 position. 2. Turn crown either way to correct time. 3. Push in crown to position a. The second hand in the 1/20th dial begins to run. To set the date: 1. Gently pull the crown to position b. 2. Turn crown ant...

  • Page 37: To Set The Alarm:

    Os80 & os81 operating instructions continued . . . To set the alarm: 1. Gently pull the crown to position b. 2. Turn the crown clockwise to set the alarm hand to the desired set time. The alarm will sound when the hour hand aligns with the alarm hand. 3. Push in crown to position a. Note: pressing t...

  • Page 38: Chronograph Measurement:

    Chronograph measurement: 1. Press br button to enable the chronograph mode. The second hand located in the 1/20th dial rapidly advances to the 0 position. 2. Press tr button to start and stop chronograph. A confirmation tone is heard whenever the tr button is pressed. After 30 seconds the second han...

  • Page 39

    Os80 & os81 operating instructions continued . . . To reset chronograph hands: this procedure should be performed when the chronograph second hand and chronograph 1/20th second hand do not return to the 0 second position after the chronograph has been reset, and including after the battery has been ...

  • Page 40

    3. Press br button to set the chronograph 1/20th second hand to the 0 position. The chronograph hands can be advanced rapidly by continuously pressing the top or bottom right buttons. 4. Once the hands have been zeroed, reset the time and return the crown to position a. 5. Press br button to check t...

  • Page 41: Care Of Your Watch

    Care of your watch avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; thi...

  • Page 42: Avoid Strong Shocks

    Avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets 2. Generally, your watch is n...

  • Page 43: Periodic Inspection

    Avoid harmful chemicals, solvents & gases 1. Avoid wearing your watch in the presence of strong chemicals, solvents or gases. 2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint. Periodic inspection 1. A regular ...

  • Page 44: Important

    Important 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep your watch clean wipe off any moisture that adheres to the case, glas...

  • Page 45: Bracelet Adjustment

    Bracelet adjustment the bracelet requires a small adjustment and the model has a z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole..

  • Page 46: Z-Type Clasp.

    The bracelet requires a significant adjustment or the model does not have a z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch 3. Follow the instructions in the after sales service section to return your watch...

  • Page 47: Resistance To Water

    Resistance to water indications on dial or caseback light spray, dial caseback perspiration, swimming light rain etc... Bathing, etc... - water resistant ok x water resistant water resistant ok ok 50m (5 atm) water resistant water resistant ok ok 100m (10 atm) water resistant water resistant ok ok 1...

  • Page 48

    Diving: skin diving: scuba diving: when using a diving without diving with helium enriched an air tank an air tank environment x x x x x x ok x x ok ok x.

  • Page 49

    Resistance to water continued . . . Important - never pull out the crown when the watch is wet. • tighten screwlock crown completely • water resistance is not a permenant property. We strongly recommend you return your watch for resealing every 4 - 5 years and/or when changing batteries • “water res...