Accusound ES 100 Wireless Instruction Manual
Specifications ES 100 Eclipse Series Wireless Loudspeakers
Power
120 Watts power handling all speakers wired
Frequency Response
125~20000Hz
Efficiency
88 dB@1watt 1 metre
Impedance
8 Ohms nominal
Components
2 x 75mm paper cone drivers
1 x 25mm silk soft dome tweeter
Connections
Gold plated push terminals
Dimensions Front and rear H x W x D (mm) with base
Centre H x W x D (mm)
Weight Front kg each, Centre kg, Rear kg each
Transmitter Voltage
100v ~ 240 Volts ~50/60 Hz + ~ - 20%
Transmission
2.4000 ~ 2.4835 GHz with Auto Seeking channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour
Satin black finish
Standby Power
Uses 1 watt or less in auto standby mode
ES 100 Powered Subwoofer Specifications
Power Amplifier
300 watt RMS
Voltage
100 ~240 Volt 50/60Hz +~- 20%
Frequency Response
25~150Hz
Driver
1 x 250mm paper cone driver
Volume
Variable 0~10
Phase
Switchable 0~180 degrees
Crossover Control
Variable 50~150 Hz
Main Power Switch
Switches Off, On
Standby
Switches On, Auto, Off.
Uses 1 watt or less in auto standby mode
Fuse
Protection 2 amp
Input
L + R RCA, LFE and High Level inputs
Dimensions
H x W x D (mm)
Weight kg
Colour
Satin black finish
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email:
info@accusound.com.au
www.accusound.com.au
2013
Eclipse Series Home
Theatre System
ES 100 Wireless
Instruction Manual
Please read these instructions carefully
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
8 x 30mm screws for bases
Carton 2
1 x Powered Subwoofer