Accusound ES 120 Instruction Manual
Specifications ES80 Eclipse Series Wireless Loudspeakers
Power
120 Watts power handling all speakers wired
Frequency Response
125~20000Hz
Efficiency
88 dB@1watt 1 metre
Impedance
8 Ohms nominal
Components
2 x 75mm (3 inch) paper cone drivers
1 x 25mm (1 inch) silk soft dome tweeter
Connections
Gold plated push terminals
Dimensions Front and rear 1018H x 135W x 132D (mm) with base
Centre 110H x 360W x 145D (mm)
Weight Front kg each, centre kg, rear kg each
Transmitter Voltage
240 Volts ~50 Hz +~- 10%
Transmission
2.4000 ~ 2.4835 GHz with Auto Seeking channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour
Black piano & PVC finish
Standby
Uses 1 watt of power in auto standby mode
ES 80.1 Powered Subwoofer Specifications Upgrade
Amplifier
Digital Switch Mode Amp. 300 Watts RMS
Voltage
240 Volt 50 Hz +~- 20%
Frequency Response
25~200 Hz
Driver
1 x 250mm (10 inch) paper cone driver
Passive Radiator
1 x 250mm (10 inch) paper cone radiator
Volume
Variable 0~10
Phase
Variable 0~180 degrees
Crossover Control
Variable 40~200 Hz
Main Power Switch
Switches Off, On
Standby
Switches Auto, On. Uses1 watt of power in standby
Fuse
Protection 2.5 amp
Input
RCA socket
Output
RCA
socket
Dimensions
350H x 320W x375D (mm)
Weight 19kg
Colour
Black piano finish top
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email:
info@accusound.com.au
www.accusound.com.au
2012
Quality Sound by Design
Eclipse Series Home
Theatre System
ES 80 Wireless
Instruction Manual
Please read these instructions carefully
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
8 x 30mm screws for bases
Carton 2
1 x Powered Subwoofer