Accusound ES40 Eclipse Series Instruction manual
Specifications ES40 Eclipse Series Wireless Loudspeakers
Power
120 Watts power handling all speakers wired
Frequency Response
125~20000Hz
Efficiency
88 dB@1watt 1 metre
Impedance
8 Ohms nominal
Components
2 x 75mm (3 inch) paper cone drivers
1 x 25mm (1 inch) silk soft dome tweeter
Connections
Gold plated push & screw terminals
Dimensions Front and rear 1000 H x 190 W x 215 D (mm) with base
Centre 110 H x 360 W x 160 D (mm)
Weight Front 6kg each, centre 4.5kg, rear 6.5kg each
Transmitter Voltage
240 Volts ~50 Hz +~- 10%
Transmission
2.4000 ~ 2.4835 GHz with 8 stereo channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour
Black piano PVC finish
ES40 Powered Subwoofer Specifications
Power Amplifier
Australian safety standard 250 watt RMS
Voltage
240 Volt 50 Hz +~- 10%
Frequency Response
25~200Hz
Driver
1 x 250mm (10 inch) paper cone driver
Volume
Variable 0~10
Phase
Variable 0~180 degrees
Crossover Control
Variable 40~200 Hz
Bass Extension
Variable 0~6 dB
Main Power Switch
Switches Off, On
Standby
Switches Off, Auto, On
Fuse
Protection 2.5 amp
Input
RCA socket
Output
RCA socket
Dimensions
450 H x 350 W x 410 D (mm)
Weight 19.5kg
Colour
Black piano finish top and base
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email:
info@accusound.com.au
www.accusound.com.au
2008
8
Quality Sound by Design
Eclipse Series Home
Theatre System
ES 40 Wireless
Instruction Manual
Please read these instructions carefully
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
These are packed in the end of the foam inserts
8 x 30mm screws for glass bases
4 x Rubber pads for base of centre speaker
Both these are located in the Instruction manual
Carton 2
1 x Powered Subwoofer