- DL manuals
- Accusplit
- Watch
- AE602M100
- Instruction Manual
Accusplit AE602M100 Instruction Manual
Summary of AE602M100
Page 1
Instruction manual digital quartz stopwatch ae602m100 ae760m100 ae790m500 ae790m500dec ®.
Page 2
Important note for model 760m & 790m this stopwatch can store up to 100 or 500 split/lap times depending on the model. However please note when there are 5 free memories left, the icon “full” will blink to remind you of the nearly full situation. Whenever the storage is full, extra split/lap times w...
Page 3: Instructions
Instructions introduction you are about to enjoy an advanced cumulative and lap memory professional digital quartz stopwatch with advanced timing features. Model ae602m100, ae760m100, ae790m500 & ae790m500dec stopwatch includes time of day, daily alarm, chronograph stopwatch, 100 or 500 memory, data...
Page 4
As you choose each "mode", a message will be displayed for a second before you enter the mode: normal time mode (all models) alarm time mode (all models) chronograph mode (all models) lap time recall mode (all models) data mode (760m & 790m models only) the operation of the stopwatch is divided into...
Page 5
This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be described later in the instructions. Pressing [mode] button will toggle among the modes above. Note that there is no auto-return function in the stopwatch. Whenever you c...
Page 6
Or date-month (d-m), sound on or off, contrast (darkness of the digits - default is 9), then back to second, and recycles again. Note: when the second is to be set, press [start] to reset the second digits to zero. At the end of setting, press [recall] or [mode] to exit from the setting mode and bac...
Page 7: 1 0 : 3 5'
Alarm time mode press [mode] until you enter alarm mode. This mode is used for displaying the daily alarm time and allows you to enable or disable the alarm. When you enter the alarm time mode, the display shows the alarm time on the upper line while the date is shown in the middle of the display an...
Page 8: 0: 03' 35"
Whenever the stopwatch stops running, the "stop" indicator will be on. Press the button [start/stop] to start the stopwatch. As it runs, the current elapsed time is shown on the lower line. To view the current split / lap time, you can press [lap/split]. The number of split/lap times is shown on the...
Page 9: 0: 00' 00"
To stop the chronograph, press [stop]. The indicator "stop" will come on again to show the status. Press [reset] as the stopwatch stops to reset the stopwatch while the split/lap times will be kept in memory. When the stopwatch starts running from reset state, all the lap memories will be cleared. D...
Page 10: 0: 03' 06"
Please note that if the stopwatch has started running (or is running), no selection for chronograph operating modes can be made until the stopwatch has been stopped and reset. Segmented run memory for lap/split time storage:- a header consisting of the date/time stamp is attached to each segment to ...
Page 11: 0: 03' 16"
Press [recall] again to view the average lap time. Press [recall] continually to review all the stored split/lap times. The sequence starts from the last record to the first record when the stopwatch is running and vice versa when the stopwatch has been stopped. [recall] [recall] [recall] 0: 00' 05"...
Page 12: 0: 03' 48"
[recall] after recalling the first record, press [recall] once more to exit from recall mode and go back to chronograph mode. The "recall" icon will be off. [recall] during memory recall, you can press either [start], [stop] or [lap/split] to exit from chrono recall mode and jump to the chrono start...
Page 13: 0: 01' 00"
The header consisting of the date/time stamp will be shown. The number of laps in the segment will appear in the upper left while the segment number is displayed in the middle left. If the segment shown is not your desired segment, press [start] to reach the desired segment. The current segment will...
Page 14: A 12 : 58'
How to delete all memory segments:- instead of deleting one segment, you can also delete all memory segments. When you enter the data mode, you see the screen "free xxx lap". Press and hold the [reset] for 3 seconds. You will hear "beep, beep, beep" for 3 seconds, then a long "beep". At this point a...
Page 15: A 12 : 58'
Under cs operation mode, the timer, after counting down to 0:00'00", will stay at 0:00'00"0 until you press [reset] to reload the timer value. Under cu operation mode, the timer, after counting down to 0:00'00"0, will count up and stop at 19:59'59"9. How to set the timer press and hold [recall] for ...
Page 16
Pacer mode press [mode] until you enter the pacer mode. In the pacer mode, you can set the standard pacer speed from 5 to 240 beats per minute in the following values: 5, 10, 20, 30, 40, 50, 60, 80, 100, 120, 150, 180, 200, 240 in pacer mode, the display will be:- the digits are flashing to indicate...
Page 17: 0: 00' 00"
In the stroke measurement mode, the duration of 3 strokes is taken and the stroke frequency (counts per minute) is calculated. As the stroke frequency falls out of the range of 10 - 180, "err" will appear to show the error condition. Press [start] to start the measurement. During the 1st second, 180...
Page 18: 0: 00' 00"
Distance setting press [recall] for 2 seconds to enter setting mode, the unit icon flashes. Press [start] to toggle between km and mile. To select the following digits, press [reset]. The far right digit will blink and you can set the distance from the least significant digit to the most significant...
Page 19: 0: 02' 01"
Press [lap/split] to record more lap times and show different speeds. Note that as the speed exceeds the value 1999.999 km/hr or 1999.999 mph, "err" will be shown and no storage will be made for that record. [lap/split] [lap/split] to stop the speed measurement, press [stop] to stop the timer. Befor...
Page 20
Lap time & speed recall similar to the chrono recall mode, during speed measurement or stop state, you can press [recall] to recall the speed/lap memories. The mode message will be shown for one to two seconds as the mode message display is displayed. The speed and lap time will be displayed on the ...
Page 21
No-proof-of-purchase limited warranty see label on back of unit for details, or check http://support.Accusplit.Com accusplit, inc. 3090 independence drive, suite 148 livermore, ca 94551 usa 800-935-1996 • 925-290-1900 • fax 925-290-1930 www.Accusplit.Com • support@accuspli t.Com.